Canon MF7280 imageCLASS MF7280 Copying Guide - Page 67
Auto Zoom, the size of the original and the selected copy paper. The same copy ratio is used
UPC - 013803056129
View all Canon MF7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
NOTE If you enter a value outside the setting range, a message prompting you to enter an appropriate value appears on the screen. 3 Press (Start). Copying starts. NOTE • To return the copy ratio to 100%, press [Direct]. 2 • To cancel all settings and return the machine to the Standard mode, press (Reset). Basic Copying Features Auto Zoom You can set the machine to automatically select the appropriate copy ratio based on the size of the original and the selected copy paper. The same copy ratio is used for the horizontal (X) and vertical (Y) axes. The available copy ratios are from 50% to 200%. IMPORTANT • You cannot use the Auto setting on the Copy Ratio screen with the Automatic Paper Selection mode. • You cannot copy highly transparent originals, such as transparencies, using the Auto setting on the Copy Ratio screen. Use the Preset Zoom or Zoom by Percentage mode instead. • To use the Auto setting on the Copy Ratio screen, your originals must conform to one of the standard paper sizes: - 11" x 17", LGL, LTR, LTRR, STMT or STMTR (You can only place an STMTR original on the platen glass.) Changing the Copy (Zoom) Ratio 2-23