Canon MP450 MP450 User's Guide - Page 66
About Layout and Trimming, About Image Optimize, About Date/File No. print - printer manual
UPC - 013803052220
View all Canon MP450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
z About "Layout" and "Trimming" For "Layout", when the "Default setting" (selections based on the machine setting) is selected, the machine operates based on the bordered/borderless setting specified in the Memory card mode of the machine. Trimming is performed based on settings on the PictBridge-compliant device. Note z When printing onto Photo Stickers (PS-101) (16-up), use the following settings. 1. Load Photo Stickers (PS-101) in the Auto Sheet Feeder. 2. Select "10 x 15 cm / 4" x 6"" for the "Page size", and "Photo" for the "Media type". 3. Select "N-up" for layout, then select "16". z Some PictBridge compliant devices display the Layout option; 2-up, 4- up, 9-up, and 16-up. In this case always select "16-up". If there are no options on the PictBridge compliant device that correspond to 2-up, 4up, 9-up, or 16-up, printing on stickers is not possible. z When you are using Photo Stickers (PS-101), do not set "Borderless Printing" in "Layout" settings. z About "Image Optimize" When "Default setting" (selections based on the machine setting) is selected, the machine operates based on the settings in tab 2 of the Settings screen specified in Memory card mode of the machine. (See page 29) If you use a Canon PictBridge-compliant device, you can select "VIVID", "NR", "VIVID+NR" or "FACE". (Note that these options cannot be selected on some models.) Note z When "VIVID" is selected, the green and blue portions of photos are printed more vividly. z When "NR" (Noise Reduction) is selected, noise in blue portions, such as the sky, and dark portions is removed. z When "VIVID+NR" is selected, functions of both "VIVID" and "NR" are performed. z When "FACE" is selected, a darkened face on the photo taken against the light is brightened. z About "Date/File No. print" By default, "Off" is selected for this machine. If you select an image which has had the shooting date embedded in it using a camera with the print mode, select "Off" for this function. If you select "Date", "File No.", or "Both", the date and/or file number will be printed over the embedded date. Note z Never disconnect the USB cable during printing. z When disconnecting the USB cable between the device and machine, follow the instructions given in the instruction manual of the device. z Controls of the device cannot be used for the following: - Print quality setting - Printer maintenance z For the device operation method and troubleshooting, refer to your digital device's manual. 64 Printing Photographs Directly From A Digital Camera Chapter 7