Canon MP730 MultiPASS MP730 User's Guide

Canon MP730 - MultiPASS Color Inkjet Manual

Get Canon MP730 - MultiPASS Color Inkjet PDF manuals and user guides
UPC - 013803031683
View all Canon MP730 manuals
Add to My Manuals
Save this manual to your list of manuals

Canon MP730 manual content summary:

  • Canon MP730 | MultiPASS MP730 User's Guide - Page 1
    User's Guide
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 2
    , optical, chemical, manual, or otherwise, without the prior written permission of Canon Inc. Trademarks Canon and BJ are registered trademarks. BCI, MultiPASS, UHQ, and ScanGear are trademarks of Canon Inc. All other product and brand names are registered trademarks, trademarks or service marks of
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 3
    want to learn more about advanced features. Software Guide This guide, included as a PDF file in the MultiPASS MP730/700 Setup CD-ROM, includes comprehensive instructions on using the software. Refer to this guide for full instructions on printing, scanning, and Fax Model faxing from your computer
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 4
    Reference Refer to the Quick Reference Guide for more details. Guide Software Guide Refer to the Software Guide (included in the CD-ROM) for more details. machine General term used to represent the MultiPASS MP730 or MultiPASS MP700. default A setting that remains in effect unless you change
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 5
    a memory card 4-2 Removing a memory card 4-3 Printing methods 4-4 Printing an index 4-5 Printing all frames 4-6 Printing a single frame 4-8 Printing a range of frames 4-10 DPOF (Digital Print Order Format) printing 4-12 Setting vivid photo printing 4-14 Setting date printing 4-14 Reading
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 6
    the ADF area 11-8 Cleaning the roller 11-9 12: Troubleshooting Problems installing and removing software .. 12-1 Problems turning on the computer 12-2 Problems printing from your computer .......... 12-2 Copying problems 12-5 Problems scanning 12-6 Fax Model Problems receiving faxes 12-9 Fax
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 7
    Follow all warnings and instructions marked on the machine come into contact with electrical parts inside the machine, it may support its weight. (For the weight of the machine, see the Appendix.) • Do not place objects around the power plug so that you are able to readily disconnect the power
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 8
    on it, or extensively bend it. These actions may cause electrical damage and result in fire or electrical shock. • Do not insert or unplug the power plug with wet hands, as this may result in electrical shock. • Do not overload the wall outlet with too many electrical appliances, as this may
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 9
    power cord or plug is damaged or frayed. - If liquid has spilled into the machine. - If the machine has been exposed to rain or water. - If the machine does not operate normally when you have followed the instructions in the guides need for servicing. Handling WARNING parts inside to remove paper jams
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 10
    in performance may indicate a need for servicing. Maintenance WARNING • Do not service the machine yourself except as specifically described in this guide. If further servicing is required, contact the Canon Customer Care Center. • Keep the machine clean. Dust accumulation may prevent the machine
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 11
    without "Call Waiting" can be used with the MultiPASS MP730. Key telephone systems are not recommended because they send non-standard signals to individual telephones for ringing and special codes, which may cause a fax error. C. Power requirements This equipment should be connected to a standard
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 12
    this guide, disconnect the equipment from the telephone line or turn off the power and unplug the power cord. The telephone line should not be reconnected or the power cord plugged in until the problem is completely resolved. Users should contact Canon Authorized Service Facilities for servicing of
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 13
    the instructions on p. 7-1 or p. 8-1 of this guide. Users in Canada Pre-installation requirements for Canon facsimile MultiPASS MP730. Key telephone systems are not recommended because they send non-standard signals to individual telephones for ringing and special codes, which may cause a fax error
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 14
    modular jack should be relatively close to the power outlet to facilitate installation. NOTICE This equipment meets the applicable Industry Canada compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be coordinated
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 15
    CANON CANADA INC. 1-800-OK-CANON 24 HOURS A DAY, SEVEN DAYS A WEEK http://www.canon.ca Preface XV
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 16
    the Canon MultiPASS MP730 (indicated by the mark Fax Model ) or the MultiPASS MP700. Your machine incorporates the following functions in one simple-to-operate device: Printer Print crisp, clear color or black & white documents from your computer. Photo printer Print photo-quality images
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 17
    • Multi-purpose tray • Tray cover • Paper output tray • Fax Model Document tray • Ink tanks (Black, cyan, magenta, yellow) • Printhead • Power cord • Documentation (Set-Up Sheet, Quick Reference Guide) • MultiPASS MP730/700 Setup CD-ROM • Fax Model Telephone line cord • Fax Model Destination
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 18
    guides r Multi-purpose tray t Tray cover y Automatic sheet feeder u Fax Model Document tray i Fax Model Document output slot o Document cover !0 Scanning unit (Printer cover) !1 [Open] button !2 Paper output tray !3 Card slot !4 Indicator light !5 Operation panel !6 Platen glass !7 Printhead
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 19
    Lights also when there are documents in the machine's memory. e Alarm light Blinks when an error occurs or when the machine needs attention. r [Menu] key Accesses the settings to customize operation of your machine. t LCD Displays messages and selections, and prompts during operation. y [2]([-]) and
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 20
    to photo card print mode. !6 Numeric keys Enter numerical values as well as Fax Model fax/telephone numbers and characters. !7 Fax Model [Tone] key Switches temporarily to tone dialing. !8 [Color] key Sets the machine for color copying and Fax Model color sending. 1 !9 [Stop/Reset] key
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 21
    Max. 8 !/2 × 11 #/4 in. (216 × 297 mm) • 1 sheet • 10 photographs for multi-scan Thickness Max. #/4 in. (20 mm) Weight - Fax Model ADF to 90 g/m2) Problem documents • Make sure any glue, ink, or correction fluid on the document is completely dry before loading. • Remove all fasteners (staples,
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 22
    no document on the platen glass. 2 Insert the top of your document, face up, into the ADF until you hear a beep q. Then adjust the document guides to the width of the document w. w AB q 2-2 Document handling Chapter 2
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 23
    × 4 !/8 in./241 × 105 mm) European DL (8 %/8 × 4 #/8 in./220 × 110 mm) Quantity: 10 envelopes Paper thickness lever position: Right Printer driver setting ([Media Type]): [Envelope] Use for: Printing from your computer • You cannot load envelopes of other sizes than those listed above. • Do not use
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 24
    : 10 sheets Paper thickness lever position: Left Printer driver setting ([Media Type]): [Glossy Photo Paper] Drying time: 2 minutes Use for: Printing from your computer/copying • Load the paper with the whiter side facing up. • Do not use the loading support sheet provided with the package. • Remove
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 25
    position: Left Printer driver setting ([Media Type]): [Photo Paper Pro] Drying time: 30 minutes Use for: All functions • Load the paper with the glossier side facing up, one sheet at a time to stop them from sticking together. Photo Paper Pro PC-101S This card-size paper for printing photographs is
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 26
    1 sheet Paper thickness lever position: Right Printer driver setting ([Media Type]): [T-Shirt Transfer] Use for: Printing from your computer/copying • Load the is low. • Photo Paper Pro guidelines: -Do not touch the printed surface until the ink is fixed (approx. 30 minutes). Colors in dark images
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 27
    the w center of the machine. Print media handling CAUTION • Do not try to manually move or stop the printhead holder. q • Do not touch any metal parts. 2 Move the paper thickness lever to the appropriate setting. • For details on which position to set for the print media you are using, see
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 28
    the multi-purpose tray. NOTE • For documents printed from your computer, specify the print media size and type on your computer ( Software Guide). • For photo printing, specify the print media size as described in Chapter 4. Follow this procedure to set the print media size and type: 1 Press [Copy
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 29
    paper jam may occur. B 3 C Print media handling 3 Replace the tray cover over the multi-purpose tray. Loading envelopes Follow this procedure to load envelopes in the multi-purpose tray: 1 Make sure the paper thickness lever is set to the right. • For details, see p. 3-5. 2 Remove the tray cover
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 30
    Ensure that no curl or puff exceeds !/8 in. (3 mm). Cross-sections of the envelope edge 4 Place the stack of envelopes (print side up) in the multi-purpose tray q. Pinch the paper guide A and adjust to the width of the stack w. • Feed the left side of the envelope (return address portion) into the
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 31
    amounts of ink, so use new ink tanks if necessary. • For best print results on banner paper, use light design patterns. Follow this procedure to load banner paper in the multi-purpose tray: 1 Make sure the paper thickness lever is set to the right. • For details, see p. 3-5. 2 Remove the tray
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 32
    media • Multimedia card • SD memory card Photo printing from a memory card CAUTION • You cannot Canon cannot guarantee that all card brands will be fully compatible. • The file format is compatible with the JPEG (DCF/Exif 2.2 or lower/JFIF) format. • Some digital cameras are not compatible with 64
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 33
    slot, press [ON/OFF (1 sec.)] to turn off the power before removing the card. Once removed, press [ON/OFF (1 sec.)] again to turn on the power before inserting the other memory card. • In Windows 2000, if you turn off the machine, the [Unsafe Removal of Device] screen will be displayed. In this case
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 34
    off the machine when the indicator light is blinking as this may damage the data in the memory card. IMPORTANT • If an error occurs during printing (e.g. paper runs out), do not remove the memory card as this may damage the data in the memory card. 1 Check that the indicator light is not blinkingq
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 35
    the photograph(s) you want to print. Step 2 Select a printing method. All frames ( p. 4-6) Single frame ( p. 4-8) Frame range ( p. 4-10) DPOF ( p. 4-12) NOTE • You may not be able to print photographs if their file sizes are too large. • You can set vivid photo printing to make your photographs
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 36
    the print media size. • Select: - for letter-size print media. - for card-size print media. - for card-size print media. - for A4-size print media. 9 Press [Set]. SELECT PAPER TYPE PHOTO PAPER PRO A 4 Photo printing from a memory card Chapter 4 Photo printing from
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 37
    • If you selected or in step 8, you can only select . 11 Press [Set]. INDEX PHOTO LTR 12 Press [Start]. • To cancel printing, press [Stop/Reset]. NOTE • You can only print one index at a time. • The number assigned to each thumbnail on the index is
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 38
    If you selected in step 10: 11 Go to step 13. 4 If you selected in step 10: 11 Press [Set]. Photo printing from a memory card BORDERLESS PRINT OFF 12 Use [2] or [3] to select borderless printing. • Select: - to print the photographs with borders. - to
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 39
    the index beforehand ( p. 4-5). 9 Press [Set]. NUMBER OF PRINTS 1COPIES 10 Use the numeric keys to enter the number of copies of the photograph you want. • You can also use [2] or [3] to select the quantity. 11 Press [Set]. SELECT PAPER SIZE LTR 4-8 Photo printing from a memory card Chapter 4
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 40
    to step 17. 4 If you selected in step 14: 15 Press [Set]. Photo printing from a memory card BORDERLESS PRINT OFF 16 Use [2] or [3] to select borderless printing. • Select: - to print the photograph with a border. - to print the photograph without a border. 17 Press
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 41
    FILE: 0006 10 Use the numeric keys to enter the last frame number you want print. • You can also use [2] or [3] to select the frame number. • To find the frame number, you will need to print the index beforehand ( p. 4-5). 11 Press [Set]. SELECT PAPER SIZE LTR 4-10 Photo printing from a memory
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 42
    Go to step 17. If you selected in step 14: 15 Press [Set]. Photo printing from a memory card BORDERLESS PRINT OFF 16 Use [2] or [3] to select borderless printing. • Select: - to print the photographs with borders. - to print the photographs without borders. 17 Press
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 43
    display DPOF. DPOF PHOTO LTR • You can press [Start] at this point to print immediately the photographs according to the DPOF settings. However, if you want to set the print media size and type as well as borderless printing, follow the instructions below. 4 Press [Menu]. 5 Press [Set] twice. SELECT
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 44
    step 11. If you selected in step 8: 9 Press [Set]. Photo printing from a memory card BORDERLESS PRINT OFF 4 10 Use [2] or [3] to select borderless printing. • Select: - to print the photographs with borders. - to print the photographs without borders. 11 Press
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 45
    can be changed with the setting ( • You cannot set date printing with DPOF printing. p. 13-3). Follow this procedure to enable/disable this setting: 1 Press [Photo Print]. 2 Press [Menu]. 3 Use [2] or [3] to select . 4-14 Photo printing from a memory card Chapter 4
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 46
    the hard disk), or by changing the setting, can copy hard disk files onto the memory card. Photo printing from a memory card IMPORTANT • Do not put your computer in standby or sleep mode when a memory card is inserted in a card slot. Also, do not remove or switch memory cards when your computer
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 47
    Use [2] or [3] to select to disable overwriting or to enable overwriting. 10 Press [Set]. 11 Press [Stop/Reset] to return to standby mode. 12 Press [Copy], [Fax], or [Scan] to select a mode other than photo print mode. • To avoid damage to data being accessed on a memory card, you cannot
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 48
    the numeric keys to enter the number of copies. 4 Adjust any necessary settings for your document. • Press [Color] for color copying, or [B&W] for black & white copying ( below). • Press [Paper Select] to select the print media size and type ( p. 3-6). • Press [Image Quality] to select the scanning
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 49
    1 Press [Exposure]. 2 Use [2] or [3] to select the exposure. 3 Press [Set]. 5-2 * This setting is only available when is selected as the print media type ( p. 3-6). ** This setting is not available when or is selected as the print media type ( p. 3-6). Copying Chapter 5
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 50
    % + 2 Use the numeric keys to enter a copy ratio between 25% and 400%. 3 Press [Set]. Copying an image to fit the page If the document to be copied is on paper larger or smaller than the specified print media size ( p. 3-6), you can automatically reduce or enlarge the image to fit the selected
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 51
    quality setting to or will use less memory ( p. 5-1). • You can only use this feature when the print media size setting is set to or . For details on setting the print media size, see p. 3-6. Follow this procedure to reduce and copy two originals onto one page
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 52
    , a margin may still appear. • You can only use this feature when the print media type setting is set to , , or . For details on setting the print media type, see p. 3-6. 5 • You can only copy in color with this feature. • Since the image is slightly enlarged to fill the
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 53
    manually (with the setting), do the following: 1 Set the print media size you will be copying on to ( p. 3-6). 2 Decide the number of times you want to copy the image. You can have a maximum of four vertical repeats and four horizontal repeats. 3 Your document must be no larger than one
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 54
    IMAGE REPEAT AUTO Copying 9 Use [2] or [3] to select or . If you selected in step 9: 10 Press [Set]. 100% LTR TEXT REPEAT AUTO 11 Press [Start]. If you selected in step 9: 10 Press [Set]. VERTICAL HORIZONTAL < 2 > 2 11 Use [2] or [3] to select the number of
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 55
    ]. 3 Use the numeric keys to enter the number of copies. 4 Adjust any necessary settings for your document ( step 4, p. 5-1). 5 Press [Menu]. 6 Press [Set]. SPECIAL COPY 1.2 on 1 7 Use [2] or [3] to select . 8 Press [Set]. 100% LTR TEXT MIRROR 9 Press [Start]. 5-8 Copying Chapter 5
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 56
    slightly reduce the image so that it fits on the output print media. Same size print media NOTE • Your original document and the print media loaded in the multi-purpose tray must be the same size. For details on setting the print media size, see p. 3-6. Follow this procedure to copy an entire
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 57
    Chapter 6 Registering information in your machine Guidelines for entering numbers, letters, and symbols Follow this procedure when you come to a step that requires you to enter a name or number: 1 Press [T] to switch to letter mode (:A) or number mode (:1). • You can see what mode you are in by the
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 58
    the fax number using speed dialing, the other party's name appears here. NOTE • You can set the sender information to print inside or outside the image area ( , p. 13-3). • For color sending, the recipient's name is not printed. 6-2 Registering information in your machine Chapter 6
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 59
    DATA>. 3 Press [Set]. USER DATA 1.TEL REGISTRATION 4 Use [2] or [3] to select . 5 Press [Set] three times. DATE & TIME 12/27/2003 15:10 6 Use the see p. 6-1. 13 Press [Set]. 14 Press [Stop/Reset]. NOTE • You can print the USER'S DATA LIST to check the sender information
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 60
    company. For ISDN or ADSL connections, contact the telephone company or service provider to confirm your line type. NOTE • You can print the USER'S DATA LIST to check the current setting ( p. 10-5). Follow this procedure to set the telephone line type: 1 Press [Menu]. 2 Use [2] or [3] to select
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 61
    SAV TIME ON 9 Use [2] or [3] to select to enable daylight saving or to disable it. If you selected in step 9: 10 Press [Set]. If you selected in step 9: 10 Press [Set] three times. MONTH APRIL 11 Use [2] or [3] to select the month when daylight saving starts. 12 Press
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 62
    [2] or [3] to select the month when daylight saving ends. 20 Press [Set] twice. WEEK FIRST WEEK 21 Use [2] or [3] to select the week on the month) 22 Press [Set] twice. DAY SUNDAY 23 Use [2] or [3] to select the day when daylight saving ends. 24 Press [Set] twice. TIME 02:00 25 Use
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 63
    Group dialing Register a group of fax numbers for group dialing ( p. 7-6), then to send a document to all numbers in that group, simply press the one-touch speed dialing key, or press [Coded Dial] and enter the two-digit code assigned to that group. Speed dialing Chapter 7 Speed dialing 7-1
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 64
    , including spaces). • For details on how to enter or delete characters, see p. 6-1. 9 Press [Set]. 10 To continue registering one-touch speed dialing keys, repeat the procedure from step 4. -orPress [Stop/Reset] to return to standby mode. NOTE • Use the destination labels provided with your machine
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 65
    Changing or deleting an entry Follow the procedure for registering one-touch speed dialing ( p. 7-2), and do the following: step 6, press and hold [2] to clear the registered number, press [Set], then [Stop/Reset]. The name will automatically be deleted when you delete the number. 7 Speed dialing
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 66
    delete numbers, see p. 6-1. 9 Press [Set] twice. NAME :A 10 Use the numeric keys to enter a Set]. 12 To continue registering coded speed dialing codes, repeat the procedure from step 6. -orPress [Stop/Reset] to return to standby mode. NOTE • For a list of the recipients you have registered, print
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 67
    numeric keys to enter the new number. To change a registered name: In step 10, use [2] to delete the registered name, then use the numeric keys to enter hold [2] to clear the registered number, press [Set], then [Stop/Reset]. The name will automatically be deleted when you delete the number.
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 68
    . • To register a group under a one-touch speed dialing key: Use [2] or [3] to select an empty key (01 to 10). • To register a group under a one-touch or coded speed dialing (i.e. you cannot enter numbers with the numeric keys). • To review the numbers you have entered, use [2] or [3]. 9 Press [Set
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 69
    here will appear in speed dialing lists. 11 Press [Set]. 12 To continue registering other groups, repeat the procedure from step 6. -orPress [Stop/Reset] to return to standby mode. NOTE • For a list of the entries you have made, print the group dialing list ( p. 7-9). Changing or deleting an entry
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 70
    speed dialing: One-touch speed dialing: 1 Press the one-touch speed dialing key assigned to the number you want to dial (01 to 10). Coded speed dialing: 09 10 1 Press [Coded Dial]. 09 10 2 Use scanning automatically, disable the setting ( p. 13-4). 7-8 Speed dialing Chapter 7
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 71
    ]. SPEED DIAL LIST 1.1-TOUCH LIST 7 Use [2] or [3] to select the list you want to print. • Select from the following: 7 - - - Speed dialing 8 Press [Set]. If you selected or above, select in what order you
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 72
    methods of sending faxes from your machine: Memory sending ( below) Manual sending ( p. 8-2) Memory sending 8 You should normally use memory Start]. To start sending, press [Set]. To cancel memory sending: Press [Stop/Reset] and follow any instructions in the LCD. Chapter 8 Sending faxes 8-1
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 73
    . NOTE • With manual sending, you cannot manual sending: 1 Connect a telephone to your machine if you want to talk to the recipient before sending a document ( Set any necessary settings for your document. • Press [Color] for color sending, Ask the recipient to set his fax machine to receive faxes
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 74
    document to a fax machine that does not support color faxing, you will get an error message. Try sending again in black & white. Alternatively, if you are sending from the ADF, you can enable the setting ( p. 13-4) that will send a color document in black & white if the recipient
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 75
    the exposure. 3 Press [Set]. p. 8-1) and adjust the One-touch speed dialing Register a number for one-touch speed dialing so that you only have to press one key to dial that number. For details on registering and using one software. For details, see the Software Guide. 8-4 Sending faxes Chapter 8
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 76
    entered with the numeric keys. To cancel manual redialing: Press [Stop/Reset]. Automatic redialing When using memory sending to send settings to suit your needs (see below). To cancel automatic redialing: Wait until the machine starts redialing, then press [Stop/Reset]. Follow the instructions
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 77
    [3] to select to enable automatic redialing or to disable it. If you selected in step 10: 11 Press [Set]. 12 Press [Stop/Reset]. If you selected in step 10: 11 Press [Set] twice. REDIAL TIMES 2TIMES 12 Use the numeric keys to enter the number of times you want the machine
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 78
    in one operation. You can dial the recipients' numbers using any of the following dialing methods: • One-touch speed dialing: up to 10 destinations start sending, press [Set]. To cancel sending: Press [Stop/Reset] and follow the instructions in the LCD. When you press [Stop/Reset], sending to all
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 79
    /RX NO.) of the document you want to print or delete. • If you are unsure of the transaction number, print the DOC. MEMORY LIST ( Printing a list of documents in memory, above). • To interpret the LCD message, see Checking a document's details on p. 8-9. 8 Press [Set]. 8-8 Sending faxes Chapter 8
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 80
    the first page only, or [#] to print all pages of the document. • If deleting a document, press [T]. 10 To continue printing or deleting other documents in memory, repeat the procedure from step 7. -orPress [Stop/Reset] to return to standby mode. Checking a document's details When you have to
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 81
    procedure to set the machine temporarily for tone dialing: 1 Press [Fax]. 2 Press [Hook] or lift the handset if you have connected a telephone to your machine. 3 Use the numeric keys to dial the number of the information service. 4 When the recorded message of the information service answers, press
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 82
    have subscribed to a DRP (Distinctive Ring Pattern) service offered by some companies. - for the machine to ring for fax and manually. - to receive faxes automatically and route voice calls to an answering machine connected to your machine. 5 Press [Set].
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 83
    machine must take if no one answers a voice call. Follow this procedure to customize SETTINGS>. 5 Press [Set]. FAX SETTINGS 1.USER SETTINGS 6 Use [2] or [3] to select . 7 Press [Set]. RX SETTINGS 1.ECM RX 8 Use [2] or [3] to select . 9 Press [Set] twice. RING START TIME 8SEC 10
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 84
    to receive mode or disconnects the call if no one answers a voice call after the specified time in step 12. • Select: - to switch to receive mode. - to disconnect the call. 15 Press [Set]. 16 Press [Stop/Reset]. Receiving faxes automatically: FAX ONLY MODE Choose this mode
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 85
    (s) using only one telephone line. Your machine will automatically monitor incoming calls and based on the ring pattern, will let you know if the call is a fax or voice call. Contact your telephone company for more information on this service. You will need to: • set ( p. 9-1). • connect
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 86
    RING> - - - - 12 Press [Set]. 13 Press [Stop/Reset]. Receiving faxes manually: MANUAL MODE Choose this mode if: • you only have one telephone line for both fax and telephone use. • you receive mainly voice calls and sometimes
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 87
    machine as follows: • Set the answering machine to answer on the first or second ring. • The entire message should be no longer than 15 seconds. • In the message, tell your callers how to send a fax. Canceling receiving Press [Stop/Reset] and follow any instructions in the LCD. 9-6 Receiving
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 88
    . You can also manually set the machine to print it. TX (Transmission) Prints after transmission of a document. p. 10-3 REPORT You can enable or disable this feature, or set the machine to print a report only when an error occurs. You can also set the machine to print the first page of
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 89
    ACTIVITY REPORT AUTO PRINT ON 10 Use [2] or [3] to select the setting you want. • Select: - to turn on automatic printing of the ACTIVITY REPORT. - to turn off automatic printing of the ACTIVITY REPORT. 11 Press [Set]. 12 Press [Stop/Reset]. 10-2 Reports and lists
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 90
    If you selected in step 8: 9 Press [Set]. 10 Press [Stop/Reset]. If you selected or in step 8: 9 Press [Set]. PRINT WITH IMAGE ON 10 Use [2] or [3] to select if you want the first page of your fax to be printed under the report (valid for black & white
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 91
    [3] to select the setting you want. • Select: - to disable printing of a report. - to print a report only when a reception error occurs. - to print a report every time you receive a document. 11 Press [Set]. 12 Press [Stop/Reset]. 10-4 Reports and lists
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 92
    of your machine as well as the registered sender information ( p. 6-2). Follow this procedure to print the USER'S DATA LIST: 1 Press [Fax]. 2 Press [Menu]. 3 Use [2] or [3] to select . 4 Press [Set]. REPORTS/LISTS 1.ACTIVITY REPORT 5 Use [2] or [3] to select . 6 Press
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 93
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 94
    not try to manually move or stop the printhead holder. • Do not touch any metal parts. q 3 Press on the tab to release the empty ink tank q, then remove it from its slot w. CAUTION • Do not remove the printhead from the machine. • If several ink tanks need replacing, remove and replace each one
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 95
    no improvement. Step 3 Perform deep printhead cleaning ( setting) ( p. 11-4). 11 If there is no improvement. Maintenance Step 4 Replace the ink tank(s) ( p. 11-1). If there is no improvement. The printhead may be damaged. Contact the Canon Customer Care Center. If there is
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 96
    specific color is not printed, clean the printhead. NOTE • Cleaning the printhead consumes a small amount of ink. Cleaning too often reduces the amount of ink in the ink tanks. • You can also clean the printhead from your computer ( Software Guide). Follow this procedure to clean the printhead from
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 97
    To align the printhead after you have just installed it, follow the procedure in the Set-Up Sheet. If you have printed the nozzle check pattern ( p. 11-4) and determined that the printhead needs aligning, align it from the operation panel ( below) or from the software ( Software Guide). Follow this
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 98
    has been adjusted, the machine will print a vertical pattern. 12 In column L on the printout, note which box has the most solid image. Note the value next to this box and use [2] or [3] to enter it. CHANGE V VALUE L 0 GOOD SAMPLE Most solid box 13 Press [Set]. 14 Repeat steps 12 and 13
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 99
    glass. C BA 11 Cleaning inside the machine To prevent ink spots and paper dust from accumulating inside the machine and affecting print quality, clean the machine's print area periodically. Follow this procedure to clean inside the machine: 1 Turn off the power and disconnect the power cord from the
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 100
    ink absorber (sponge part) D, or any metal parts. 3 Use a dry cloth to wipe away any stray drops of ink, scraps of paper, and dust, especially from the black panel E. AB C D E 4 Close the scanning unit until it locks into place. 5 Reconnect the power cord and turn on the power. Fax Model Cleaning
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 101
    turn on the power. Cleaning the roller Clean the roller when envelopes do not feed correctly. Follow this procedure to perform roller cleaning: 1 Remove any print media from the multi-purpose tray. 2 Press [Menu]. 3 Use [2] or [3] to select . 4 Press [Set]. MAINTENANCE 1.NOZZLE CHECK
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 102
    Chapter 12 Troubleshooting Problems installing and removing software See below if you were unable to install or remove the software. [MP Drivers/MP Toolbox] Cannot install the software. 1. Have you followed the instructions in the Set-Up Sheet to install the software? If you have not followed
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 103
    Is the Alarm light blinking? If it is blinking, see p. 12-18. 3. Is the background of the BJ Status Monitor picture yellow or red? Follow the instructions in the BJ Status Monitor ( Software Guide). If appears. Remove the paper jam or whatever is preventing the printhead holder
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 104
    do not need to increase the available disk space. 9. Restart the computer. 10. There may be a problem with the printer driver. Remove the printer driver and try reinstalling ( Software Guide). Cannot print to a shared printer. 1. Is the server (the computer to which the machine is connected) turned
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 105
    . Leave the printed page in the paper output tray for 30 to 60 seconds and remove when the ink has dried. 2. Is intensity set too high? The paper may curl or rub if intensity is set too high in the printer driver. In the [Properties] dialog box, on the Main tab, click [Manual] in Color Adjustment
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 106
    run out? 12 If nothing prints or one of the colors does not print, check if the ink tanks are empty. Replace the ink tank(s) if necessary. Also, make sure the orange tape has been completely removed from the ink tanks. Correct Tape not removed completely InkBTCanI-k3eY Yellow Made in Japan
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 107
    \CNCMP50.ini Windows XP: windows\system32\CNCMP50.ini 2. Below the last line, add the following two lines, then save the file. Take care not to modify any other parts. [Scan] ReadSize=16 7. Fax Model Is the [Select source] setting in the MP Toolbox, ScanGear MP, or WIA driver set correctly? Choose
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 108
    In the [Scanners and Cameras] window, if [Canon MP730] or [Canon MP700] (Windows XP: [WIA Canon MP730] or [WIA Canon MP700]) is present, the machine is recognized. If not, remove the software ( Software Guide) and reinstall ( Set-Up Sheet). You tried to create a multipage PDF, but were not able to
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 109
    . 3. There is moire when you scan printed material. In ScanGear MP, click [Descreen] ( Software Guide). 4. Set the monitor display colors to 16-bit or higher. In [Display Properties], set the display colors to 16-bit color, 24-bit color or higher. 5. Clean the platen glass and document cover ( p. 11
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 110
    cannot manually Troubleshooting answer calls. : Set this mode if you have subscribed to a DRP (Distinctive Ring Pattern) service offered Was there an error during reception? Check the LCD for an error message ( p. 12-19). Print the ACTIVITY REPORT and check for an error ( p. 10-2). 9. Is
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 111
    the printhead, p. 11-3). Print the nozzle check pattern ( p. 11-4). If the nozzle check pattern does not print properly, see p. 11-3. 3. Is set to ? Set to ( p. 13-4). 4. The printed fax is poor quality. See the items marked with P in Problems printing from your
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 112
    setting ( p. 6-4). M C 3. Is there anything displayed in the LCD? If nothing is displayed, see p. 12-14. M C 4. Is the Alarm error during transmission? Print the ACTIVITY REPORT and check for an error ( p. 10 problem. Contact the recipient to confirm. If you are unable to make a clean copy, clean the
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 113
    Is the image data valid? If standby mode is displayed in photo print mode, there are valid images on the memory card. If a message is displayed, see p. 12-19. 6. Try again with another memory card. 1. If you can print without any problems using a different memory card, the first memory card may be
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 114
    The date and time of access is written in the Windows XP preview, and if is set to or photo print mode is selected, a write protect error may be displayed. Turn the machine off then on again. Removable disk does not appear in Windows Explorer. This behavior can occur if you map
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 115
    the machine. Remove the memory card and restart your computer. If nothing displays in the LCD (if there is no power) When you connect the power cord to the machine and wall outlet, and press [ON/OFF (1 sec.)], the machine powers up and a message is displayed in the LCD. While the Alarm light blinks
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 116
    power is restored, the MEMORY CLEAR REPORT will be printed automatically listing the documents deleted from memory. Note however that this report will not be printed if the print media size is set to a setting other than , , or , or if black ink or paper has run out. Removing jammed
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 117
    you cannot remove the torn pieces, turn the machine off then on with the [ON/OFF (1 sec.)] key. The jammed pieces will automatically be ejected. 3 Close the scanning unit until it locks into place. 4 Press [Resume]. • If you are printing from a Windows application, follow the instructions displayed
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 118
    roller towards the feeder cover. A 5 Pull out the jammed page from the ADF. 6 Lower the paper release lever A, then close the feeder cover. • If [Stop/Reset] is pressed during scanning and the document remains in the ADF, wait for the 12 machine to return to standby mode, then press [Resume
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 119
    If the nozzle check pattern does not print properly Refer to Maintaining the printhead, p. 11-3. Interpreting the messages When the Alarm light blinks Check the message in the LCD. If there is a message, follow the instructions and correct the error. Then to resume operation, press [Resume]. The
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 120
    cancel automatic redialing, wait until the machine starts dialing the number, press [Stop/Reset], then follow the instructions in the LCD. p. 8-5 Bk INK EMPTY The black ink tank in the printhead is empty. Replace the ink tank. p. 11-2 Fax Model BUSY/NO SIGNAL (#018) The telephone number you
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 121
    again. If the message does not clear after pressing [Resume], contact the Canon Customer Care Center. p. 12-15 The waste ink tank (which holds Contact the Canon Customer Care the ink used for printhead Center to have the waste ink tank cleaning) may be full. replaced immediately. There is
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 122
    Message (Error code) INSERT PHOTO CARD INVALID KEY/SETTING LOAD PAPER (PRESS START KEY) M INK EMPTY MACHINE IN USE CANNOT TURN OFF each part separately. To free up space in the machine's memory, print or delete any documents in memory you no longer need. p. 8-8 In photo print mode, the Print the
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 123
    machine will resume printing when it has cooled down. WASTED INK NEAR FULL The waste ink tank is nearly full. If appears, contact the Canon Customer Care Center. WRONG CARTRIDGE The printhead is not installed correctly. Try to reinstall the printhead. If the message remains in
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 124
    the following information ready: • Product name: MultiPASS MP730 or MultiPASS MP700 • Serial number (located on the label located at the back of the machine) • Details of the problem • Steps taken to try to resolve the problem and the results 12 Troubleshooting Chapter 12 Troubleshooting 12-23
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 125
    w and menu e the setting is located. 3 Press [Copy], [Scan], [Photo Print], or Fax Model [Fax] depending under which function key w the setting is located. Menu: SPECIAL COPY Function key: [Copy] Name Description Setting 1. 2 on 1 2. BORDERLESS COPY Copies two pages on one page (letter- or A4
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 126
    [Scan], [Photo Print], FaxModel [Fax] Name Description Setting Details 1. NOZZLE CHECK Prints the nozzle check pattern. - p. 11-4 2. HEAD CLEANING Performs normal printhead cleaning. - p. 11-4 3. HEAD REFRESHING Performs deep printhead cleaning. - p. 11-4 4. ALIGN PRINT HEAD Aligns
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 127
    black & white faxes. (Automatically set inside the image area for color faxes.) OUTSIDE IMAGE INSIDE IMAGE 2. TELEPHONE # MARK Selects the mark to appear before the fax/telephone FAX number printed on faxes you send. TEL 6. OFFHOOK ALARM Enables/disables the alarm that alerts you if the
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 128
    of an ACTIVITY REPORT after every 20 transactions. AUTO PRINT ON p. 10-2 AUTO PRINT OFF 3. TX SETTINGS - - 1. ECM TX* Enables/disables Error Correction Mode (ECM) during ON sending. OFF 2. MID PAUSE SET Selects the pause length when you press [Redial/Pause]. 2 SEC (1 to 15) 3. AUTO
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 129
    3. PRINTER SETTINGS Description Setting Details If If you select as the receive ALARM VOLUME Selects the alarm volume. 2. CARD PROTECT Enables/disables overwriting memory card data in all modes except photo print mode. 3. DISPLAY LANGUAGE Selects the language for LCD messages
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 130
    in key order. 3. GROUP DIAL LIST Prints the GROUP DIAL LIST. 3. USER DATA LIST Prints the USER DATA LIST. 4. DOC. MEMORY LIST Prints the DOC. MEMORY LIST. Setting - - - YES=(T) NO=(#) - YES=(T) NO=(#) - - - Details p. 10-2 p. 7-9 p. 7-9 p. 7-9 p. 10-5 p. 8-8 13-6 Machine settings Chapter 13
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 131
    7" A4 SELECT PAPER TYPE Selects the print media type for the photograph. PHOTO PAPER PRO PLAIN PAPER BORDERLESS PRINT If you select , enables/disables OFF borderless printing for the photograph. ON FRAME RANGE - - 13 p. 4-10 Machine settings FIRST FILE: Selects the first
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 132
    enables/disables borderless printing for the photographs. 2. VIVID PHOTO PRINT Enables/disables to make colors, especially blues and greens, appear more vibrant. 3. PRINT PHOTO DATE Enables/disables date printing. Setting Details - p. 4-12 LTR 4" × 6" 5" × 7" A4 PHOTO PAPER PRO PLAIN PAPER
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 133
    Power source Power consumption Weight (Components attached) Dimensions 120 V/60 Hz • Maximum: Approx. 39.1 W Fax Model Approx. 51.5 W • Standby: Approx. 8.0 W Fax Model Approx. 10.4 W 24 lb./10 1950, C-UL • Radiation: FCC Part 15 Class B, IC, Class B • Fax Model PTT: FCC part 68, IC CS-03 • Other
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 134
    : Printing area: Canon recommends that you print within (dark shade) this area. Printable area: The area where it is possible to print. (light shade) However, printing in this area can adversely affect print quality or paper feed precision. • Paper printable areas: Letter size: 8 × 10 #/4 in
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 135
    Ink tank colors/capacity • Black (BCI-3eBK): approx. 740*, approx. 1500** • Cyan (BCI-3eC): approx. 570** • Magenta (BCI-3eM): approx. 440** • Yellow (BCI-3eY): approx. 380** A Specifications * 1500 characters per page, normal text, at standard and plain paper mode with XP printer driver
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 136
    : 13.0 pages/minute • Color printing: Fast: 14 pages/minute Standard: 9.0 pages/minute (Based on Canon standard pattern) Print width • Max. 8 in. (203.2 mm) • Borderless printing: 8 !/2 in. (216.0 mm) Printing resolution Max. 4800 (horizontal) × 1200 (vertical) dpi Photo print specifications
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 137
    on Canon COLOR FAX TEST SHEET.) Scanning image processing • UHQ™ (Ultra High Quality) image enhancement • Halftones: 64 PHOTO>: 203 pels/in. × 196 lines/in. (8 pels/mm × 7.70 lines/mm) • , : 200 × 200 dpi Dialing • Automatic dialing One-touch speed dialing (10
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 138
    Telephone specifications Connection Telephone/answering machine (CNG detecting signal)/data modem Specifications subject to change without notice. A-6 Specifications Appendix
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 139
    in black & white 5-1 in color 5-1 mirror 5-8 I problems 12-12 reduce 5-3, 5-9 repeating image 5-6, 5-7 two pages on one 5-4 COVER OPEN message 12-20 DATA IN MEMORY/CANNOT TURN OFF message 12-20 Date entering 6-3 printing 4-14 Daylight saving, setting 6-5 to 6-6 Density. See Contrast
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 140
    key 1-4 I-2 Index In Use/Memory light 1-4 Index printing 4-5 Indicator light 1-3 Ink tank 1-2 guidelines 11-1 replacing 11-2 when to replace 11-1 INSERT PHOTO CARD message 12-21 INVALID KEY/SETTING message 12-21 Jams removing document 12-16, 12-17 removing paper 12-15, 12-16 LCD 1-4 if nothing
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 141
    11-6 cleaning 11-4, 11-7 holder 1-3 maintaining 11-3 Printing problems 12-2 to 12-5 PROBLEM READING CARD message 12-22 Problems cannot solve 12-23 copying 12-12 documents 2-1 installing software 12-1 power 12-14 printing from computer 12-2 to 12-5 receiving faxes 12-9, 12-10 removing
  • Canon MP730 | MultiPASS MP730 User's Guide - Page 142
    8-7 Set key 1-4 Settings 13-2 to 13-8 accessing 13-1 Single frame printing 4-8 to 4-9 Software problems installing 12-1 problems removing 12-1 SPECIAL COPY menu 13-2 Speed dialing lists 7-9 methods 7-1 registering 7-2, 7-3 using 7-8 Start key 1-5 Stop/Reset key 1-5 Switchboard, dialing through 8-10
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
User’s Guide