Canon MP730 MultiPASS MP730 User's Guide - Page 30
in the multi-purpose tray, Place the stack of envelopes print side up
UPC - 013803031683
View all Canon MP730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
If the edges of the envelope are inflated or are curling up, place the envelope on a desk and with a pen press down on it moving from the center toward the edges of the envelope. • Ensure that no curl or puff exceeds !/8 in. (3 mm). Cross-sections of the envelope edge 4 Place the stack of envelopes (print side up) in the multi-purpose tray q. Pinch the paper guide A and adjust to the width of the stack w. • Feed the left side of the envelope (return address portion) into the multi-purpose tray first. IMPORTANT • Make sure the stack does not exceed the paper limit mark B or tab. Otherwise a paper jam may occur. 5 Replace the tray cover over the multi-purpose tray. Incorrect Correct A w q B 3-8 Print media handling Chapter 3
3-8
Print media handling
Chapter 3
If the edges of the envelope are
inflated or are curling up, place the
envelope on a desk and with a pen press
down on it moving from the center toward
the edges of the envelope.
•
Ensure that no curl or puff exceeds
!
/
8
in. (3 mm).
4
Place the stack of envelopes (print side up)
in the multi-purpose tray
q
. Pinch the
paper guide
A
and adjust to the width of
the stack
w
.
•
Feed the left side of the envelope (return address
portion) into the multi-purpose tray first.
IMPORTANT
•
Make sure the stack does not exceed the paper
limit mark
B
or tab. Otherwise a paper jam may
occur.
5
Replace the tray cover over the
multi-purpose tray.
Cross-sections of the envelope edge
Incorrect
Correct
B
w
q
A