Canon MP990 Network Setup Troubleshooting - Page 12
Restoring the Machine's Default LAN Settings to Perform Setup Again - reset
UPC - 013803110135
View all Canon MP990 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Restoring the Machine's Default LAN Settings to Perform Setup Again Action Follow the procedure below to restore LAN settings of the machine to the default state. 1 Use the Easy-Scroll Wheel to select Settings, then press the OK button. 2 Select Device settings, then press the OK button. 3 Select LAN settings, then press the OK button. 4 Select Reset LAN settings, then press the OK button. 5 Select Yes, then press the OK button. 6 Make sure that the screen shown to the right appears. • After a while, the LAN settings screen returns. The LAN setting of the machine is now restored to the default state. • Perform setup again by following the procedures in "Wireless Setup" on page 23 and onward or "Wired Setup" on page 30 and onward in the printed manual: Getting Started. Wireless LAN SSID Data encryption TCP/IP setting Wired LAN TCP/IP setting Inactive BJNPSETUP Inactive Obtain an IP address automatically Inactive Obtain an IP address automatically 10