Canon MultiPASS MP700 MultiPASS MP700 Set-Up Sheet
Canon MultiPASS MP700 Manual
View all Canon MultiPASS MP700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon MultiPASS MP700 manual content summary:
- Canon MultiPASS MP700 | MultiPASS MP700 Set-Up Sheet - Page 1
purchasing the Canon MultiPASS MP700. To get your machine ready for use, please follow the instructions in this Set-Up Sheet before referring to any other documentation. • DO NOT assemble the machine or connect the USB cable IMPORTANT before installing the software. You will be instructed when to - Canon MultiPASS MP700 | MultiPASS MP700 Set-Up Sheet - Page 2
the software. 1 Turn on your computer. 2 On your computer, quit any open applications, including virus checkers. 3 Insert the MultiPASS MP730/700 Setup CD-ROM into your disk drive. 4 In the [MP Setup] screen, click [Install MP Drivers]. • If Set-up screen is not displayed, on the Windows desktop - Canon MultiPASS MP700 | MultiPASS MP700 Set-Up Sheet - Page 3
Setup] screen, click [Install MP Toolbox]. • If you had to restart your computer and Set-up screen is not displayed or you have closed it, on the Windows desktop, double-click [My Computer] (Windows XP: Click [Start], then click [My Computer]). Open the CD-ROM icon, then double-click [setup (setup - Canon MultiPASS MP700 | MultiPASS MP700 Set-Up Sheet - Page 4
. 30 seconds PUT IN CARTRIDGE 1 Plug the power cord into a socket. 2 When you connect the machine, the Alarm light blinks, and the one second. Load paper. Place a stack of paper (print-side up) in the multi-purpose tray q. Pinch the paper guide A and adjust to the width of the stack w. Then - Canon MultiPASS MP700 | MultiPASS MP700 Set-Up Sheet - Page 5
the metal rod or any parts inside the w machine. • The machine must be turned on when opening the scanning unit. q 2 Remove the printhead from its packaging, then remove the orange protective cap A. A B IMPORTANT • Do not touch the electrical contacts B. 3 Raise the lock lever C, then gently - Canon MultiPASS MP700 | MultiPASS MP700 Set-Up Sheet - Page 6
PUSH IMPORTANT • Make sure the ink tanks are inserted all the way printhead as explained in step 9. Align the printhead. NOTE • You can also align the printhead from the software. For details, refer to the Software Guide. 1 When the LCD A displays the following, press [Set]. ALIGN PRINT HEAD - Canon MultiPASS MP700 | MultiPASS MP700 Set-Up Sheet - Page 7
to return to standby mode. NOTE • If streaks appear on the printed PRINT VERT. PATTERN? YES=(A) NO=(#) surface when you use the machine, perform the vertical printhead alignment. For details, refer to p. 9-5 of the Quick Reference Guide. Connect the USB cable to complete the computer settings - Canon MultiPASS MP700 | MultiPASS MP700 Set-Up Sheet - Page 8
Guide. ● View User's Manual To read the manual on the CD-ROM, click [View User's Manual] on the [MP Setup] screen. CAUTION • For Windows 2000, the machine may not be able to be set as the default printer. If that happens, refer to "Setting the default printer" in the Software Guide. Congratulations
Unpack the machine and its components.
Check that you have the following:
NOTE
• A printer cable is not included.You must purchase a USB cable (less than 16
# /
8
ft./5 m) to
connect your machine to a computer.
Machine
Multi-purpose tray
Tray cover
Printhead
Ink tanks
(Black, cyan, magenta, yellow)
Paper output tray
Power cord
Documentation
(Set-Up Sheet, Quick Reference Guide)
MultiPASS MP730/700 Setup CD-ROM
Set-Up Sheet
Set-Up Sheet
Thank you for purchasing the Canon MultiPASS MP700.
To get your machine ready for use, please follow the instructions in this Set-Up Sheet
before referring to any other documentation.
READ THIS SHEET FIRST
READ THIS SHEET FIRST
• DO NOT assemble the machine or connect the USB cable
before installing the software.You will be instructed when
to assemble and connect the cable.
IMPORTANT