Canon PIXMA MG5220 Solución de problemas de configuración de red - Page 14
Specifying the Machine's IP Address IPv4 only, IPv4/IPv6 setting, Device settings, LAN settings - instructions
View all Canon PIXMA MG5220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
ENGLISH 11-B WPA/WPA2 1 Press the right FUNCTION button. Disable 2 Enter the network key, then press the left FUNCTION button. • Enter upper and lower case letters of the alphabet correctly. Letters are case sensitive. 3 Make sure that the network key is correct, then press the OK button. Go to . 12 When the completion screen appears, press the OK button. The Setup menu screen returns. Press the HOME button. Specifying the Machine's IP Address (IPv4 only) Action The machine's IP Address can be specified by the following procedure. 1 With Setup displayed on the HOME screen, press the right FUNCTION button. 2 Select Device settings, then press the OK button. 3 Select LAN settings, then press the OK button. 4 Select Other settings, then press the OK button. 5 Select IPv4/IPv6 setting, then press the OK button. 6 Select IPv4, then press the OK button. 7 Select Yes, then press the OK button. 8 Select Manual setup, then press the OK button. • Follow the on-screen instructions to proceed with settings. • When the setup is complete, press the HOME button. 13