Canon PIXMA MG8120 Network Setup Troubleshooting - Page 15
Restoring the Machine's Default LAN Settings to Perform Setup Again, Device settings, LAN settings
View all Canon PIXMA MG8120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Restoring the Machine's Default LAN Settings to Perform Setup Again Action Follow the procedure below to restore LAN settings of the machine to the default state. 1 With Setup displayed on the HOME screen, touch the right FUNCTION button. 2 Select Device settings, then touch the OK button. 3 Select LAN settings, then touch the OK button. 4 Select Reset LAN settings, then touch the OK button. 5 Select Yes, then touch the OK button. 6 Make sure that the completion screen appears, then touch the OK button. • The LAN settings screen returns. Touch the HOME button. The LAN setting of the machine is now restored to the default state. • Perform setup again by following the procedures in "Wireless Setup" and onward or "Wired Setup" and onward in the printed manual: Getting Started. Wireless LAN SSID Data encryption TCP/IP setting Wired LAN TCP/IP setting Inactive BJNPSETUP Inactive Obtain an IP address automatically Inactive Obtain an IP address automatically 14