Canon PIXMA MP150 MP150 User's Guide - Page 65
About Layout and Trimming, About Image optimize, About Date/File No. print - troubleshooting
View all Canon PIXMA MP150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
z About "Layout" and "Trimming" For "Layout", when the "Default setting" (selections based on the machine setting) is selected, the machine operates based on the bordered/borderless setting specified in the Memory card mode of the machine (MP170) or the Fit-to-Page setting when Photo Paper is selected on the Operation Panel of the machine (MP150). Trimming is performed based on settings on the PictBridge-compliant device. Note z When printing onto Photo Stickers (PS-101) (16-up), use the following settings. 1. Load Photo Stickers (PS-101) in the Auto Sheet Feeder. 2. Select "10 x 15 cm / 4" x 6"" for the "Page size", and "Photo" for the "Media type". 3. Select "N-up" for layout, then select "16". z Some PictBridge compliant devices display the Layout option; 2-up, 4up, 9-up, and 16-up. In this case always select "16-up". If there are no options on the PictBridge compliant device that correspond to 2-up, 4up, 9-up, or 16-up, printing on stickers is not possible. z When you are using Photo Stickers (PS-101), do not set "Borderless Printing" in "Layout" settings. z About "Image optimize" When "Default setting" (selections based on the machine setting) is selected, the machine operates based on the "IMAGE ENHANCEMENT" settings mode using the controls of the machine. If you use a Canon PictBridge-compliant device, you can select "VIVID", "NR", "VIVID+NR" or "FACE". (Note that these options cannot be selected for some models.) Note z When "VIVID" is selected, the green and blue portions of photos are printed more vividly. z When "NR" (Noise Reduction) is selected, noise in blue portions, such as the sky, and dark portions is removed. z When "VIVID+NR" is selected, functions of both "VIVID" and "NR" are performed. z When "FACE" is selected, a darkened face on the photo taken against the light is brightened. z About "Date/File No. print" By default, "Off" is selected for this machine. If you select an image which has had the shooting date embedded in it using a camera with the print mode, select "Off" for this function. If you select "Date", "File No.", or "Both", the date and/or file number will be printed over the embedded date (MP170). Note z Never disconnect the USB cable during printing. z When disconnecting the USB cable between the device and machine, follow the instructions given in the instruction manual of the device. z Controls of the device cannot be used for the following: - Print quality setting - Machine maintenance z For the device operation method and troubleshooting, refer to your digital device's manual. Chapter 7 Printing Photographs Directly From A Digital Camera 63