Canon PIXMA MP495 Network Setup Troubleshooting - Page 10
Authentication, Key ID, Key Format, WEP Key, Passphrase, Dynamic Encryption Type, Manual Setup - wireless
UPC - 660685024540
View all Canon PIXMA MP495 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
ENGLISH 6-A WEP G I WPA/WPA2 Disable F H J K 1 Enter the network key in WEP Key (F). • Enter upper and lower case letters of the alphabet correctly when the network key is 5 or 13 characters. Letters are case sensitive. Letters are not case sensitive if the network key is 10 or 26 characters (digits). 2 Select Key Length (G). • When WEP 40 bit is selected in AirPort Utility (AirPort Admin Utility), select 64 bit. • When WEP (Transitional Security Network) is selected in AirPort Utility, select 128 bit. 3 Select Key Format (H). • Select ASCII when the network key is 5 or 13 characters. Select Hex when it is 10 or 26 characters (digits). 4 Select Key ID (I). • When using AirPort, select 1 in the screen. Selecting other key numbers will disable the connection between the machine and AirPort. 5 Select Authentication (J), then click OK (K). Go to . 6-B WPA/WPA2 L Disable M N 1 Enter the network key in Passphrase (L). • Enter upper and lower case letters of the alphabet correctly when the network key is between 8 and 63 characters. Letters are case sensitive. Letters are not case sensitive if the network key is 64 characters. 2 Select Dynamic Encryption Type (M), then click OK (N). • When WEP (Transitional Security Network) is selected in AirPort Utility, select AES(Secure Encryption). • When the access point is set to operate in IEEE802.11g and IEEE802.11n with TKIP, communication is established using IEEE802.11g. • When the access point is set to operate only in IEEE802.11n with TKIP, a connection cannot be established. Change the encryption type to something other than TKIP or change the standard to something other than IEEE802.11n, then configure wireless LAN settings again. Go to . 7 The Manual Setup screen returns. Click Connect. • After that, follow the on-screen instructions to proceed with settings.