Canon PIXMA MP980 Network Setup Troubleshooting - Page 9
Restoring the Machine to the Factory Settings
View all Canon PIXMA MP980 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
e Select Yes and press the OK button. Restoring the Machine to the Factory Settings 1 Initializing using the machine's Operation Panel Follow these steps to restore the machine's network settings to factory defaults. a Open the Operation Panel on the machine, use the Easy-Scroll Wheel or the [ or ] button to select Settings, then press the OK button. f Confirm that the right screen appears. After a while, the LAN settings screen returns. b Select Device settings and press the OK button. c Select LAN settings and press the OK button. The machine's network settings are restored to factory defaults. Factory Default Wireless LAN SSID Data encryption DHCP Client (Obtain an IP address automatically) Wired LAN DHCP Client (Obtain an IP address automatically) Active BJNPSETUP Disable • IP address: 192.168.1.123 (default) • Subnet mask: 255.255.255.0 • Default gateway: 0.0.0.0 Inactive • IP address: 192.168.1.123 (default) • Subnet mask: 255.255.255.0 • Default gateway: 0.0.0.0 d Select Reset LAN settings and press the OK button.