Canon PIXMA TS6320 TS6300 series User Manual - Page 175

Other device settings Select this setting item from Device settings in the menu screen which appears when you press the OK button. • Key repeat When you select ON, numbers, characters and other choices can be displayed quickly by pressing the holding the button when you are entering the characters etc. • ECO settings ECO settings • Quiet setting Quiet setting • Original removal reminder Selects whether the printer will display the reminder screen in case you forget to remove the original from the platen after scanning. Important • Depending on the type of original or the state of the document cover, forgetting to remove the original may not be detected. • Auto retract paper output tray When you select ON, a screen to confirm whether to stow the output tray automatically will appear when you press the power button of the printer to turn it off. • Status bar settings Change the display of the status bar. ◦ Advanced mode Enables or disables the status bar display. When Disable is selected, only the left end of the status bar will light up or flash. ◦ Brightness Adjusts the brightness of the status bar. • Wi-Fi pairing settings These settings are used to pair and connect with a Wi-Fi compatible device. ◦ Enable/disable pairing This setting is used to enable/disable the Wi-Fi pairing function of the printer. ◦ Allow/block additional pairing Additional pairings with other Wi-Fi compatible devices can be allowed or blocked. ◦ Delete paired devices Deletes all the pairing of all Wi-Fi compatible devices. 175