Canon PowerShot ELPH 150 IS User Guide - Page 97

Connection status of Eye-Fi cards in the camera can be checked on the shooting screen (in regular information display mode) or playback screen (in simple information display mode). (Gray) Not connected Interrupted (Blinking white) Connecting Not communicating (White) Connected Error acquiring Eye-Fi card information*2 (Animated) Transfer in progress*1 *1 Power saving (=20) on the camera is temporarily disabled during image transfer. *2 Restart the camera. Repeated display of this icon may indicate a problem with the card. Images labeled with a [ ] icon have been transferred. Checking Connection Information Check the access point SSID used by the Eye-Fi card or the connection status, as needed. zzPress the button, choose [Eye-Fi Settings] on the [3] tab, and then press the button. zzChoose [Connection info], and then press the button. zzThe connection information screen is displayed. Disabling Eye-Fi Transfer Configure the setting as follows to disable Eye-Fi transfer by the card, if necessary. Before Use Basic Guide Advanced Guide zzPress the button, choose [Eye-Fi Settings] on the [3] tab, and then press the button. zzChoose [Eye-Fi trans.], and then choose [Disable]. Camera Basics Auto Mode Other Shooting Modes P Mode • [Eye-Fi Settings] is not shown unless an Eye-Fi card is in the camera with its write-protect tab in the unlocked position. For this reason, you cannot change settings for an inserted Eye-Fi card if the write-protect tab is in the locked position. Playback Mode Setting Menu Accessories Appendix Index 97