Canon S100 VIXIA HF S10 / HF S100 Manual - Page 149
Power Saving Mode], Quick Start], Control for HDMI], Photo Numbering]
UPC - 013803109665
View all Canon S100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
[Power Saving Mode]: In order to save power when the camcorder is powered by a battery pack, it will automatically shut off if left without any operation for 5 minutes. • Approximately 30 seconds before the camcorder shuts off, [Auto power off] will appear. • In standby mode, the camcorder will shut off after the time selected for the [Quick Start] setting. [Quick Start]: Select whether to activate the Quick Start function when you close the LCD panel in a recording mode ( 48) and the length of time after which the camcorder will end the standby mode and shut off automatically. [Control for HDMI]: Activates the HDMI-CEC (Consumer Electronics Con- trol) function. When you connect the camcorder to an HDTV compatible with HDMI-CEC using an HDMI cable, you can control the camcorder's playback using the remote control of the TV. • If set to [ On], when the camcorder is connected to a compatible HDTV using an HDMI cable, the video input on the TV will automatically be set to the camcorder's video input. Then, you can use the up/down/ left/right buttons and the OK or SET button on the TV's remote control to play back your recordings. • Depending on the TV set, additional settings may be required on the TV itself to activate the HDMI-CEC function. Refer to the TV's instruction manual. • Correct operation of the HDMI-CEC function cannot be guaranteed even when connecting the camcorder to compatible TV sets. If you cannot use the remote control of the TV, set [Control for HDMI] to [ Off] and operate the camcorder directly or use the camcorder's wireless controller. • The remote control of the TV can only be used to play back movies or photos ( or mode only). If the camcorder is connected to the TV while it is set to a recording mode, depending on the TV used, turn- ing off the TV will automatically turn off the camcorder even if it is recording at the time. [Photo Numbering]: Select the photo numbering method to be used on a new memory card. Photos are automatically assigned consecutive numbers from 0101 to 9900, and stored in folders containing up to 100 photos. Folders are numbered from 101 to 998. [ Reset]: Photo numbers will restart from 101-0101 every time you insert a new memory card. Additional Information 149