Canon S9000 S9000 Easy Setup Instructions - Page 1

Canon S9000 Manual

Page 1 highlights

1 Unpack the Printer 1 Carefully remove all items from the box. S9000 Photo Printer 2 Prepare the Printer 1 Remove the shipping tape from the front and sides of the printer. Shipping Tape 2 Plug the power cord into the back of the printer and connect the other end to a power outlet. Start Here Easy Setup Instructions 3 Install the Print Head 1 Remove the print head from its package. 2 Turn the print head over, then remove the orange protective cap. 4 Install the Ink Tanks 1 Pull the orange tab off the yellow ink tank (BCI-6Y), then remove and discard the plastic wrapper. S9000 Photo Printer 5 Connect the Printer To Your Computer 1 Turn the printer off. IMPORTANT: Be sure the printer is off before continuing, or the computer will attempt to install the printer driver before the printer is ready. 2 Connect one end of the USB cable to the computer, the other to the printer. 2 Twist off and discard the orange protective cap. Protective cap Paper Rest NOTE: Do not touch the electrical contacts. Electrical contacts Documentation and Software Kit 3 Press the POWER button. POWER Button POWER Lamp 3 Raise the gray lock lever. S9000 Print Head Power Cord 4 Open the front cover. The print head holder automatically moves to the center. Remove the protective tape. 4 Gently slide the print head into the holder. The print head will rest at a slight angle. Do not press it down. NOTE: To avoid spilling ink, never press on the sides of an ink tank. 3 Insert the ink tank into the correct slot. (Refer to the color guide on the print head.) Press down gently until the ink tank locks into place. 4 Insert the remaining five ink tanks into their assigned slots. 5 Close the front cover, attach the paper rest and extend the paper output tray. USB Cable Continue with Step 6 on side two. USB Port Ink Tanks BCI-6C Cyan BCI-6M Magenta BCI-6BK Black BCI-6Y Yellow Protective tape Serial number 5 Lower the lock lever and gently press it down until it locks into place. BCI-6PC Photo Cyan BCI-6PM Photo Magenta Write down the serial number located to the right of the print head. You will need this later to register the product.

  • 1
  • 2

Install the Ink Tanks
Unpack the Printer
1
2
3
4
5
Prepare the Printer
Install the Print Head
Connect the Printer
To Your Computer
Start Here
Easy Setup Instructions
Photo Printer
S9000
Insert the ink tank into the correct slot.
(Refer to the color guide on the print head.)
Press down gently until the ink tank locks
into place.
Electrical contacts
Gently slide the print head into the holder.
The print head will rest at a slight angle.
Do not press it down.
Remove the print head from its package.
Turn the print head over, then remove
the orange protective cap.
NOTE:
Do not touch the electrical contacts.
Lower the lock lever and gently press
it down until it locks into place.
Raise the gray lock lever.
Plug the power cord into the back of the
printer and connect the other end to a
power outlet.
Open the front cover. The print head holder
automatically moves to the center. Remove
the protective tape.
Write down the serial number located to
the right of the print head. You will need
this later to register the product.
Serial number
Protective tape
Press the POWER button.
Remove the shipping tape from the
front and sides of the printer.
POWER
Lamp
POWER
Button
Shipping Tape
S9000
Photo Printer
Carefully remove all items from the box.
Documentation
and Software Kit
Paper Rest
Pull the orange tab off the yellow ink tank
(BCI-6Y), then remove and discard the
plastic wrapper.
Twist off and discard the orange
protective cap.
NOTE:
To avoid spilling ink, never press on
the sides of an ink tank.
Insert the remaining five ink tanks into
their assigned slots.
Close the front cover, attach the paper rest
and extend the paper output tray.
Protective cap
Ink Tanks
BCI-6C Cyan
BCI-6M Magenta
BCI-6BK Black
BCI-6Y Yellow
BCI-6PC Photo Cyan
BCI-6PM Photo Magenta
Power Cord
S9000 Print Head
USB Port
USB Cable
Continue with Step 6
on side two.
Turn the printer off.
Connect one end of the USB cable
to the computer, the other to the printer.
IMPORTANT:
Be sure the printer is
off before continuing, or the computer
will attempt to install the printer
driver before the printer is ready.
1
2
3
4
1
5
4
3
1
2
1
2
3
4
5
1
2