Canon VIXIA HF M50 VIXIA HF M50 / HF M52 / HF M500 Instruction Manual - Page 169
To manually enter a wireless access point step 3
View all Canon VIXIA HF M50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
4 Touch the [Encryption Key] control button to enter the encryption key or password of the wireless access point and then touch [OK]. • If the encryption method of the wireless access point is set to WEP, the WEP index key will appear on the screen. Select the same index key of the access point. 5 Touch [Automatic] to automatically obtain an IP address. • To assign the IP address manually, touch [Manual] and perform the procedure in To manually assign an IP address (A 167). • A screen to test the settings will appear. 6 Select whether to test the settings. • You can touch [Check Current Configuration] to review the network settings. • If you touched [Yes], a test of the settings will be performed and a confirmation screen will appear. Touch [OK]. 7 Save the settings of the connection point. [Yes] > [OK]* > [X] * After touching [OK], you can review the network settings. Touch [Wi-Fi Setup] > [Check Current Configuration] > Desired connection point > [Î] or [Í] > [K] three times when finished. To manually enter a wireless access point (step 3) Enter the details of the wireless access point. Enter the access point's SSID > [OK] > [OK] > Enter the authentication/encryption method* and, if applicable, the encryption key of the access point > [OK] > Continue to step 5 * If you select [Open], you can select [No Encryption] or [WEP]. If you select, [Open] > [WEP] or [Shared Key WEP], you will need to specify the WEP index key. Wi-Fi Functions 169