Canon Wireless File Transmitter WFT-E7A Instruction Manual
Canon Wireless File Transmitter WFT-E7A Manual
 |
View all Canon Wireless File Transmitter WFT-E7A manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon Wireless File Transmitter WFT-E7A manual content summary:
- Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 1
Wireless File Transmitter WFT-E7 To comply with local radio wave regulations, Canon offers five region-specific versions of the transmitter (WFT-E7A, E7B, E7C, E7D, and E7E) in various areas around the world. (See Areas of Use and Restrictions.) For convenience, we refer to the product in - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 2
you for purchasing a Canon product. The Wireless File Transmitter WFT-E7 is an accessory for EOS cameras. In addition to time synchronization with other cameras (over a wireless or wired LAN connection) and Bluetooth connectivity with GPS devices, the transmitter enables the following operations - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 3
Sync the Camera Time over a Wireless or Wired Connection Slave camera Slave camera LAN cable Master camera Slave camera Master camera Hub LAN cable Master camera Connect to GPS Devices (commercially - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 4
in this manual are trademarks or registered trademarks of their respective owners. Using the transmitter for remote image transfer, capture, or viewing requires adequate knowledge of configuring your wireless or wired LAN and FTP server. Canon cannot provide support for configuring wireless or wired - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 5
Remote Capture Using EOS Utility 47 4 Remote Capture Using WFT Server 53 5 Using the Transmitter as a Media Server 65 6 Linked Shooting 69 7 Managing Settings Information 83 8 Synchronizing the Camera Time 89 9 Using Bluetooth GPS Devices 93 10 Troubleshooting 97 11 Reference 113 5 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 6
Outlet...13 Attaching to the Camera ...14 Subsequent Organization of This Manual 16 1 Basic Network Settings 17 Getting Ready ...18 Displaying the [Simple control]...62 Remote Capture...63 Using WFT Server in Linked Shooting 64 5 Using the Transmitter as a Media Server 65 Configuring Media - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 7
...71 Positioning the Slave Cameras...72 Using the Transmitter with WFT Server 74 7 Managing Settings Information 83 Checking Settings Connecting GPS Devices via Bluetooth 94 10 Troubleshooting 97 Handling Error Messages ...98 Wireless LAN Notes...111 Checking Network Settings...112 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 8
the transmitter to ensure correct and safe operation. Be sure that you fully understand the safety precautions contained in the instruction manuals nearest Canon Service Center. Handling Precautions The transmitter is a precision instrument. Do not drop it or subject it to shock. The transmitter is - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 9
Nomenclature For detailed information, reference page numbers are provided in parentheses (p.**). Power lamp (p.14) Tripod screw Battery compartment cover release lever (p.11) lamp LCD panel (p.10) Battery compartment cover (p.11) Power switch (p.14) port (p.14) Ethernet RJ-45 port - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 10
Nomenclature LCD panel Connection icon Wireless signal strength Error number Wired LAN connection Case Bluetooth connection Battery check Belt holder Strap mounts Case strap Case for tripod screw Interface cables Approx. 25 cm / 9.8 in. 10 Approx. 1.5 m / 4.9 ft. - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 11
and Removing the Battery Use one Battery Pack LP-E6 to power the transmitter. When replacing the transmitter's battery, be sure to turn the transmitter off before opening the battery compartment cover. Also note that the transmitter is not sold with a battery or charger. If you do not own these - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 12
Battery check The remaining battery power is displayed when you turn the transmitter on. A blinking battery icon ( ) indicates that the battery will At Normal Temperature (23°C / 73°F) At Low Temperature (0°C / 32°F) Wireless LAN 2400 2300 Wired LAN 2200 2200 When using a fully charged LP- - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 13
disconnect the power cord while the transmitter's power switch is set to . Do not connect and use AC Adapter Kits ACK-E6 with both the camera and transmitter WFT-E7 simultaneously. It may cause malfunction to the nearby electronic devices. For more information, contact a Canon Service Center. 13 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 14
's port cap. To keep the cable securely connected, attach the cap to the transmitter. 3 Connect the transmitter and camera. Connect the end of the cable with the logo to the transmitter's terminal. Connect the end of the cable with the logo to the camera's terminal - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 15
Example of Attachment Attaching to the Camera Example of Using the Case and Strap If you turn on/off the transmitter or connect/disconnect the interface cable during Live View shooting or movie shooting, Live View shooting or movie shooting will stop. 15 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 16
of This Manual Click one of the following chapter titles to view the corresponding page. 1 Basic Network Settings (p.17) 2 Transferring Images to an FTP Server (p.31) 3 Remote Capture Using EOS Utility (p.47) 4 Remote Capture Using WFT Server (p.53) 5 Using the Transmitter as a Media - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 17
Basic Network Settings Complete the basic network settings by following the transmitter's connection instructions on the camera menu screen. 17 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 18
terminal. To connect to a wired LAN, use a LAN cable to connect the transmitter and computer. Set the transmitter for connection to the wired network. Wireless transfer of movies Individual movie files are large, and wireless file transfer takes some time. When setting up an environment for stable - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 19
follows the flow of the connection instructions. If an error is displayed, see "Troubleshooting" in Chapter 10 (p.97) and off is activated, the connection instructions close during the configuration process. 1 Turn on both the camera and transmitter. 2 Display the transmitter menu. On the camera, - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 20
) • Windows XP Professional • Mac OS X 10.6 or 10.7 For instructions on setting up your computer as an FTP server, refer to the computer documentation to remote capture, all camera operations in EOS Utility are supported. With this option, a wireless or wired network is used instead of the USB cable - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 21
this option for remote capture over a wireless or wired LAN with the transmitter acting as a server. Additionally, images , if the web browser does not support JavaScript, WFT Server functions will be limited. Also supported. For further instructions on [LinkedShot], see page 69 of this manual. 21 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 22
the LAN Type For [LinkedShot] instructions, see page 69. Note that no information about [LinkedShot] is given in this chapter. Turn the dial to select the type of LAN, and then press . Select [OK] and press to go to the next screen. Wireless LAN The [Wireless LAN setup method] screen is - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 23
]: Open system, Shared key, WPA-PSK, or WPA2-PSK [Encryption]: WEP, TKIP, or AES [Enter connection] and [Search again] To configure settings for the wireless LAN terminal manually, select [Enter connection] and press . Complete the settings following the procedure displayed. To search for - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 24
LAN terminal. For details on the encryption key, refer to the device's instruction manual. Note that the screens displayed in steps 1 to 3 below vary depending on the authentication and encryption of the wireless LAN terminal. 1 2 The [Key index] screen is displayed only if WEP encryption is - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 25
is located and how long to press it, refer to the instruction manual of the wireless LAN terminal. Select [OK] and press to establish a connection with the wireless LAN terminal. When the connection with the wireless LAN terminal is established, the [Network] screen (p.27) is displayed. 25 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 26
LAN terminal, specify the 8-digit PIN code shown on camera LCD monitor. For instructions on setting PIN codes on the wireless LAN terminal, refer to the instruction manual of the wireless LAN terminal. Select [OK] and press to display the confirmation screen. 3 Establish a connection with - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 27
settings must be automatically assigned and configured in environments using DHCP servers or wireless LAN terminals or routers supporting DHCP server functions. If an error is displayed, select [Manual setting] regardless of whether the IP address and similar settings are automatically assigned - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 28
The following instructions are for setting screens that vary depending on the communication method (FTP Transfer, EOS Utility, WFT Server, Drive] [Program Files] [Canon] [EOS Utility] [WFTPairing] folder (in this order), and then double-click the [WFT FirewallSettings] icon. After performing - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 29
Configuring Network Settings Virtual Keyboard Operation The virtual keyboard is displayed when entering the encryption key, server name, and other information. Switching between input areas To switch between input areas, press the button. Moving the cursor To move the cursor, turn the dial. - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 30
30 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 31
Transferring Images to an FTP Server With FTP transfer, you can automatically transfer each image to the FTP server as you shoot or transfer images in batches after shooting. 31 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 32
the IP address of the FTP server. If you set the DNS server IP address setting to [Auto assign] or [Manual setting], the screen on the left is displayed. For instructions on screen operations, see "Virtual Keyboard Operation" (p.29). Enter the FTP server's server name or IP address. 3 In [Port - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 33
the connection wizard closes, the display will return to the menu screen. Settings information is stored on the camera. It is not stored on the transmitter. The network settings for FTP transfer are now complete. 33 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 34
shoot without recording images, they will not be transferred. Note that automatic transfer of movies is not supported. Transfer movies after shooting, as described on pages 37-44. 1 Select [Communication settings]. 2 These images can also be transferred in batches manually at a later time (p.40). 34 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 35
Automatic Image Transfer After Each Shot Setting the Size or Type of Images to Transfer With automatic transfer, you can select which images to transfer when recording images of different sizes to CF and SD cards, or when recording both RAW and JPEG images. 1 Select [Communication settings]. 2 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 36
the image manually. Enabling LAN Power Management In the menu, select [Communication settings] [Network settings] [Set up] [LAN power save]. When this option is set to [Enable], the transmitter will log off from the FTP server after transfer and switch to standby mode. Wireless and wired - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 37
Transferring Images Individually Simply select an image and press to transfer it. You can add a caption before transferring the image. You can continue still photo shooting even while images are being transferred. Transferring the Current Image 1 Select [Communication settings]. 2 Select [ - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 38
you want to inform the recipient of the quantity to print, for example. The caption is also added to images stored on the camera. For instructions on creating and registering captions, see page 114. You can check the captions added to images in the user comments included in the Exif information - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 39
Transferring Images Individually 5 Select a caption. Turn the dial to select the [Caption] box, and then press . Turn the dial to select the caption content, and then press . 6 Transfer the image. Turn the dial to select [Transfer], and then press . 39 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 40
Batch Transfer After shooting, you can select multiple images as desired and transfer them all at once. You can transfer unsent images or images whose transfer failed previously. You can continue still photo shooting even while images are being transferred. Selecting Images to Transfer 1 In the menu - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 41
the image selection method. Menu Operation During Image Transfer You can use the menu even during image transfer. However, to prevent transfer problems, some menu items are unavailable during transfer, such as [Network settings], [Protect images], [Erase images], [Format card], and [Record func+card - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 42
Batch Transfer Batch Transfer of Images in a Folder 1 In the menu, select [Image transfer]. 2 Select [Image sel./transfer]. 3 Select [Sel.n]. 4 Select [Folder images not transfer'd]. To transfer images whose transfer previously failed, select [Folder images failed transf.]. 5 Select a folder. 42 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 43
Batch Transfer 6 Transfer the images. Select [Direct transfer]. Select [OK] on the confirmation screen displayed next. X A transfer progress screen is displayed. Selecting [Clear folder transf. history] will set the transfer history of images in the selected folder to "unsent." This enables you - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 44
Batch Transfer Batch Transfer of Images on Memory Cards 1 In the menu, select [Image transfer]. 2 Select [Image sel./transfer]. 3 Select [All image]. 4 Select [Card images not transferred]. To transfer images whose transfer previously failed, select [Card images failed transfer]. 5 Transfer the - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 45
Checking Image Transfer History Checking the Transfer History of Individual Images To check the transfer history in [Image sel./transfer], select [Sel.Image]. Image not selected for transfer (no mark) Image selected for transfer Image whose transfer failed Image already transferred Checking the - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 46
46 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 47
used instead of the USB cable, all camera operations in EOS Utility are supported, in addition to remote capture. The WFT-E7 wired or wireless LAN functions cannot be used with the Mac version of EOS Utility (as of November 2011). Check the Canon website for the latest system requirements, including - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 48
Configuring EOS Utility Communication Settings These instructions are continued from Chapter 1. With EOS Utility, you can use the included WFT Pairing Software to establish a connection between the transmitter and a computer. WFT Pairing Software is installed automatically during easy installation - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 49
press . After you turn the dial to select [OK] and press , the connection wizard closes and EOS Utility starts up. X The lamp on the transmitter lights up green. Settings information is stored on the camera. It is not stored on the - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 50
When using this function the next time, simply turn on the camera to which the transmitter is attached and start the pairing software. The connection between the camera and computer will [Preferences] [Basic Settings] tab in EOS Utility, select [… Add WFT Pairing Software to the Startup folder]. 50 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 51
Using EOS Utility For EOS Utility instructions, refer to the Software Instruction Manual (PDF). You can take full advantage of EOS Utility via the transmitter just as via a USB connection, without restrictions. In Remote Live View shooting, the rate of image transmission is slower than via USB. The - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 52
52 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 53
Remote Capture Using WFT Server Using a web browser, you can view images recorded on a memory card in the camera and download them to a computer. Additionally, you can shoot remotely over a wireless or wired LAN. Note that bulb, mirror lockup, and movie shooting are not supported. 53 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 54
WFT Server Communication Settings These instructions are continued from Chapter 1. Press and turn the dial to select the set number, and then press . Press again. After the connection wizard closes, the display will return to the menu screen. X The lamp on the transmitter - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 55
to prevent conflicts when users at other computers are connected to the transmitter simultaneously. Turn the dial to select [User *], and then screen is displayed. For instructions on input screen operations, see "Virtual Keyboard Operation" (p.29). The WFT Server network settings are now - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 56
Server In the web browser, display WFT Server, a screen for transmitter operations. Make sure you have already established in the procedure on page 55. Click [OK] to display the WFT Server screen. Web browsers that support JavaScript will display the screen on the lower left in step 4. Otherwise - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 57
Viewing Images You can browse the images recorded on the camera's memory card. 1 Click [Viewer]. X The image viewing screen is displayed. 2 Select the memory card. Click [CF] or [SD]. Click the [DCIM] folder and select the folder containing the images. 3 Select an image. To view another image, - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 58
Viewing Images 4 Download images to the computer. Click a thumbnail. X The image is displayed at a larger size. To download the image to your computer, click < >. Click [Return] to return to the image viewing screen. Although actual RAW images and movies are not displayed here, they can be - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 59
beforehand. Note that remote capture of movies is not supported. For web browsers that do not support JavaScript, see page 63, "Remote Capture". 1 Menu ⑥ AF/MF switch ⑯ Live View shooting button ⑦ Shutter speed ⑰ Manual focus button ⑧ Aperture ⑱ Live View image size switching button ⑨ ISO - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 60
size, improving responsiveness. To restore the original size, click the button again. 4 Manually adjust the focus. Click the buttons < >, < >, < >, < >, < >, and < > to adjust the focus. Note that autofocus is not supported during the Live View image display. To focus more closely, click - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 61
Remote Capture [Camera control] 5 Configure the shooting functions. Click items such as quality to view and configure their settings. Complete the settings as needed. 6 Take the picture. Click the release button (⑤). When you let go of the button, the picture is taken. X The captured image will be - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 62
For web browsers that do not support JavaScript, see page 63, "Remote Capture." 1 Click [Simple control]. X The basic capture screen and the Live View image are displayed. Live View image screen Release button Manual focus button Focuses closer Focuses farther away Levels of focus adjustment - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 63
Remote Capture The following instructions are for remote capture with web browsers that do not support JavaScript. Set up the camera for Live View shooting beforehand. Note that remote capture of movies is not supported. 1 Click [Capture]. X The capture screen is displayed. The Live View image is - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 64
Server in Linked Shooting Remote Capture in WFT Server can be used in combination with the transmitter's "Linked Shooting" function (p.74). Additionally, you can view and download images recorded on the master or slave camera's memory cards. Slave camera Linked Shooting Slave - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 65
Using the Transmitter as a Media Server Images on a memory card in the camera can be viewed over a wireless or wired LAN on a television. This function requires a DLNA*-compatible television, digital photo frame, or similar media player. (Subsequently, this equipment is collectively referred to - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 66
Communication Settings These instructions are continued from Chapter 1. Press and turn the dial to select the set number, and then press . Press again. After the connection wizard closes, the display will return to the menu screen. X The lamp on the transmitter lights up green - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 67
display it at a larger size on the television. For details, refer to the instruction manual for the media player. EOS ** CF 100EOS** 1-100 02/28/2012 02/ . Icons labeled 1-100 (for example) contain images grouped by file number in the selected folder (***EOS**). Date information shown for images - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 68
68 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 69
cameras can be linked in a wireless network to the master camera on which you will release the shutter. Note that there will be a slight delay after you release the master camera shutter until the slave camera shutters are released. Movie shooting is not supported. Slave camera Master camera 69 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 70
Cameras After setting up the slave cameras as described on this page, follow the steps on the next page for basic linked shooting. For instructions to view or download to your computer the images stored on cameras, see page 74. 1 Select [Communication settings]. 2 Select [Network settings]. 3 Select - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 71
following steps 1-3 on the preceding page, and then select [Master]. 2 Select [Auto connect]. For [Manual connect] instructions, see page 75. 3 Set up the slave cameras. On the slave cameras, select [OK]. 4 Settings information is stored on the cameras. It is not stored on the transmitters. 71 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 72
position master camera in an overall circumference of up to approximately 100 m / 328 ft. However, the distance supported for linked shooting may be shorter depending on the wireless communication conditions, which are affected by how the cameras are positioned, the environment of use, and weather - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 73
longer use a slave camera in linked shooting, set [Communication mode] to [Disconnect] on that slave camera. Any cameras compatible with linked shooting, when they have WFT series transmitters attached, can be used as slave cameras, regardless of model. 73 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 74
Using the Transmitter with WFT Server Using WFT Server, you can shoot remotely with a master camera linked to slave cameras that will shoot at the same time. WFT Server can also be used to access master or slave cameras for the Live View display, and you can adjust the focus and configure remote - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 75
following steps 1-3 on page 70, and then select [Master]. 3 Select [Manual connect]. 4 Select the connection mode. Select the wireless LAN ad hoc mode supported by the computer. 5 Specify the channel. When selecting [Manual setting], specify the same channel on the master camera, slave cameras - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 76
Using the Transmitter with WFT Server 6 Enter the encryption key. Enter a 5-digit encryption (WEP) key and press the button. The key entered here confirming the connection of the camera is displayed. Settings information is stored on the cameras. It is not stored on the transmitters. 76 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 77
Using the Transmitter with WFT Server Check the Camera Settings Check the network settings on the master and slave cameras as follows. Note that without a good understanding of these settings, - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 78
Using the Transmitter with WFT Server 5 Check the settings. Turn the dial to display other screens. Write down the IP address and SSID. 6 Check the slave camera settings. Check network - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 79
Using the Transmitter with WFT Server Configure WFT Server Communication Settings Enter a login name and password for accessing WFT Server on cameras from a computer. Although you can specify different login names and passwords for each camera, it is also possible to use the same - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 80
when users at other computers are connected to the transmitter at the same time. 7 Complete the [Login name] and [Password] settings. After you select [Login name] and [Password], the following input screen is displayed. For instructions on input screen operations, see "Virtual Keyboard Operation - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 81
Using the Transmitter with WFT Server Access the Cameras from the Computer To access the cameras from the computer, use the computer's standard search function to detect wireless LAN terminals. For details, refer to the computer instruction manual. 1 From the computer, find cameras on the network. - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 82
Using the Transmitter with WFT Server 4 Select the language. Select a language on the bottom of the screen. Web browsers that support JavaScript will display the screen on the left. A message is displayed when JavaScript is not supported. Selecting not to use JavaScript will display the screen on - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 83
Managing Settings Information 83 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 84
Checking Settings Check the network settings as follows. 1 In [Network settings], select [Set up]. 2 Select [Confirm settings]. X The settings are displayed. Example of FTP transfer and wired LAN settings Example of FTP transfer and wireless LAN settings 84 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 85
as other settings, such as the setting that determines what happens if an image of the same file name as an existing file is sent to the FTP server (p.86). 1 In [Network settings], select [Set up]. 2 desired item from [LAN type], [TCP/IP], [FTP server], or [Wireless LAN], and change the setting. 85 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 86
communication over the Internet. It provides effective security for both wireless and wired LANs. To use this function, you must enable Files of the Same Name Configured in [FTP server] [Overwrite same file]. When the transmitter is configured to prevent overwriting If there is already a file - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 87
Saving and Loading Settings Network settings can be saved on a memory card for use with other cameras. Saving Settings 1 In [Network settings], select [Set up]. 2 Select [LAN settings]. 3 Select the settings number. Here, select the settings number under which you saved LAN settings. 4 Select [ - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 88
name is determined automatically by the camera: WFTNPF, followed by a number (01 to 99) and the extension NIF. You can rename the file as desired by selecting [Change file name]. Loading Settings Load settings files stored on a memory card as follows. Also use this procedure when loading settings - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 89
Synchronizing the Camera Time Set the master camera time on up to 10 slave cameras, as needed. Synchronization can be done over a wireless or wired connection. Note that even after synchronization, there will be a slight margin of error between master and slave camera time of ±0.05 seconds, at - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 90
Preparing for Time Synchronization Wireless LAN Set up multiple cameras with transmitters attached. Master camera Slave camera Slave camera Wired LAN Use a LAN cable to connect cameras with transmitters attached. When there are multiple slave cameras, connect them to a hub with LAN cables, and - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 91
can select [Sync time between cameras]. 4 Select [Sync time between cameras]. X Select [OK] on the next screen displayed, shown below. 5 Select [LAN Type]. After selecting [Wireless] or [Wired], select [OK]. 91 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 92
Synchronizing the Time 6 Set up the master camera. After configuring the master camera settings following steps 1-5 on the preceding page, select [Master]. X When the next screen is displayed, the master camera is ready. Go to step 7 to set up the slave cameras. 7 Set up the slave cameras. After - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 93
can be checked on the camera as well as by using commercially-available GPS-compatible mapping software. For a list of specific GPS devices supported, contact the Canon Service Center. For the GPS device instructions, refer to the device's instruction manual or contact the manufacturer. 93 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 94
If a Bluetooth® password has been set on the GPS device, a password input screen is displayed. Enter the password. X The connection between the transmitter and the GPS device starts. It may take a few minutes to establish the connection with the GPS device. Camera operations such as shooting, menu - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 95
]. Pressing under these conditions will enable you to disconnect the GPS device. While the Bluetooth connection is active, is displayed on the transmitter's LCD panel and is displayed on the camera's LCD panel. 5 Confirm operation of the GPS device. Make sure the GPS device has - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 96
Connecting GPS Devices via Bluetooth Canceling the Bluetooth Connection The Bluetooth connection with the GPS device will not be terminated if you simply turn off the camera. To cancel the connection, follow these steps. 1 In the menu, select [Communication settings]. 2 Select [Bluetooth device - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 97
Troubleshooting Transfer speed in ad hoc mode may become extremely slow when the transmitter is used with certain types of computer. For more information, contact your dealer or nearest Canon Service Center. 97 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 98
is connected to a camera not compatible with the WFT-E7. If [Waiting to retry transfer...] is displayed If image transfer via FTP fails after shooting, the screen on the left is displayed. Also, an error number is displayed on the transmitter's LCD panel, and the lamp blinks in red. Check the - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 99
and follow the instructions to re-establish the connection (p.48). Are the transmitter and wireless LAN terminal configured you are not using a DHCP server, set the transmitter's network setting to [Manual setting] and IP address setting to [Manual setting] (p.27). What to check on the DHCP server - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 100
from DNS server What to check on the transmitter Is the transmitter's DNS address setting set to [Auto assign] or [Manual setting]? X If you are not using a DNS server, set the transmitter's DNS address setting to [Disable] (p.27). On the transmitter, does the DNS server's IP address setting match - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 101
server. X If applicable, ask your network administrator for the proxy server address or server name and port number, and then enter them on the transmitter. What to check on the network as a whole Does your network include a router or similar device that serves as a gateway? X If applicable, ask - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 102
, the network setting is [Auto setting]. Does the error occur under this setting? X If you are not using a DHCP server, set the transmitter's network setting to [Manual setting] (p.27). What to check on the DHCP server Is the DHCP server on? X Turn the DHCP server on. Are the DHCP server settings - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 103
server's IP address setting match the server's actual address? X Configure the IP address on the transmitter to match the actual FTP server address (p.32). Are the transmitter and wireless LAN terminal configured with the same encryption key for authentication? X This error occurs if the encryption - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 104
access to the FTP server. X You may be able to access the FTP server by setting [Passive mode] to [Enable] on the transmitter (p.86). If you are using Windows XP Service Pack 2 or later, is access to the FTP server blocked by [Windows Firewall]? X Change the Windows Firewall settings to allow access - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 105
check the upper- and lower-case characters to make sure the password on the transmitter matches it (p.33). What to check on the FTP server Do the user rights to the target folder on the FTP server to allow saving images from the transmitter. Is the FTP server on? X Turn the FTP server on. The server - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 106
some reason, the transmitter fails to receive confirmation from the FTP server that image file transfer is complete to be lost if there are nearby wireless LAN terminals, cordless telephones, microphones, service available on connected device The GPS device does not support SPP (Serial Port - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 107
? X Move the antenna to a position clearly visible from the point of view of the transmitter (p.111). What to check on the transmitter On the transmitter, does the SSID setting match that of the wireless LAN terminal? X Check the SSID on the wireless LAN terminal, and configure the same SSID on the - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 108
PSK] (p.23). X When using an AirPort for communication in infrastructure mode, [Open system] is not supported. Configure a [Shared key] on the transmitter (p.23). Are the transmitter and wireless LAN terminal configured with the same encryption key for authentication? X The setting is case-sensitive - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 109
wireless LAN encryption method Are the transmitter and wireless LAN terminal configured for the same encryption method? X The transmitter supports the wireless LAN terminal for as long as indicated in the wireless LAN terminal instructions? X Refer to the instruction manual for the wireless LAN - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 110
to master camera Are you following the correct procedure to establish the connection with master camera? X Operate the master camera by following the correct instructions (p.70, 71). Is the master camera too far from the slave cameras? X Bring the master camera closer to the slave cameras. 73: Could - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 111
LAN, try the following corrective actions if the transmission rate drops, the connection is lost, or other problems occur. Wireless LAN Terminal Installation and Antenna Position When using the transmitter indoors, install the wireless LAN terminal in the room where you are shooting. Install the - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 112
Checking Network Settings Windows Click the Windows [Start] button [All Programs] [Accessories] [Command Prompt]. Type ipconfig/all and press the key. The IP address assigned to the computer is displayed, as well as the subnet mask, gateway, and DNS server information. To avoid using - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 113
Reference 113 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 114
and enable its use over a wired or wireless LAN. For instructions on starting EOS Utility, refer to the Software Instruction Manual (PDF) provided with the camera. Note that captions cannot be created for cameras without an attached transmitter. 1 Start EOS Utility and select [Camera settings - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 115
Using a Bracket (Sold Separately) Attaching the optional Accessory Bracket AB-E1 enables you to use the transmitter and a battery grip at the same time. Attach the camera and transmitter to the bracket as shown. Tripod socket 115 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 116
to the wireless LAN access point Transmission frequency (central frequency): Version WFT-E7A WFT-E7B WFT-E7C WFT-E7D WFT-E7E Frequency Ethernet: Infrastructure or ad hoc mode * Wi-Fi Protected Setup supported Authentication method: Open, shared key, WPA-PSK, and WPA2-PSK Encryption: WEP, - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 117
WFT Server: Media Server: Linked shooting: Wireless time synchronization: Automatic transfer Image selection and transfer Transfer using SET button Transfer with captions EOS Utility remote control functions over wireless Supported devices: Wireless Canon testing standards. Transmitter - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 118
Specifications USA and Canada only: The Lithium ion/polymer battery is recyclable. Please call 1-800-8BATTERY for information on how to recycle this battery. When connecting to and using a household power outlet, use only AC Adapter Kit ACK-E6 (rated input: 100-240 V AC 50/60 Hz, rated output: 8.0 V - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 119
MEMO 119 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 120
MEMO 120 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 121
MEMO 121 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 122
MEMO 122 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 123
MEMO 123 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 124
32 E Encryption 23, 86 Encryption key 24 EOS Utility 16, 47, 51 EOSUtility 20 Error 98 Error number 10 ESS-ID 23 Ethernet RJ-45 9 F File of same name 86 Folder 33 FTP server 16, 31 FTP trans 20 G Gateway 27 GPS 93 124 GPS device 16 H Household power outlet 13 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 125
images, automatic 34 Transferring images, individual images..... 37 Troubleshooting 97 U URL 56 UTC 95 V Viewing images 57 W Web 56 WEP 23 WFT Server 16, 53 WFTserver 21 Wi-Fi Protected Setup 25 Wired LAN 22 Wired LAN connection 10 Wireless signal strength 10 Wizard 19 WPA2-PSK 23 - Canon Wireless File Transmitter WFT-E7A | Instruction Manual - Page 126
Auckland, New Zealand CANON MARKETING JAPAN INC. 16-6, Kohnan 2-chome, Minato-ku, Tokyo 108-8011, Japan This instruction manual is current as of February 2012. For information on using the transmitter with accessories introduced after this date, contact your nearest Canon Service Center. CPA-E006
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
 |
 |
Wireless File Transmitter
WFT-E7
E
INSTRUCTION MANUAL
To comply with local radio wave regulations, Canon offers five region-specific versions of the
transmitter (WFT-E7A, E7B, E7C, E7D, and E7E) in various areas around the world. (See
Areas of Use and Restrictions.) For convenience, we refer to the product in this manual simply
as “the transmitter,” without reference to versions A, B, C, D, or E.