Canon Wireless File Transmitter WFT-E7A Instruction Manual - Page 76
Enter the encryption key., Switch to setting up the slave cameras., Check the number of slave cameras.
View all Canon Wireless File Transmitter WFT-E7A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Using the Transmitter with WFT Server 6 Enter the encryption key. Enter a 5-digit encryption (WEP) key and press the button. The key entered here will be saved on the computer and used to access the master camera from the computer. 7 Switch to setting up the slave cameras. X On the slave cameras, select [OK]. 8 Check the number of slave cameras. X On the master camera LCD monitor, the number of slave cameras detected is displayed. 9 Establish the connection. On the master camera and all slave cameras, select [OK]. X A screen confirming the connection of the camera is displayed. Settings information is stored on the cameras. It is not stored on the transmitters. 76
76
Using the Transmitter with WFT Server
6
Enter the encryption key.
Enter a 5-digit encryption (WEP) key and press the
<
7
> button.
The key entered here will be saved on the
computer and used to access the master camera
from the computer.
7
Switch to setting up the slave cameras.
On the slave cameras, select [
OK
].
8
Check the number of slave cameras.
On the master camera LCD monitor, the number of
slave cameras detected is displayed.
9
Establish the connection.
On the master camera and all slave cameras,
select [
OK
].
A screen confirming the connection of the camera
is displayed.
Settings information is stored on the cameras. It is
not stored on the transmitters.