Canon Wireless Transmitter WFT-E6A Instruction Manual - Page 104
What to check on the network as a whole, FTP server rejected connection
View all Canon Wireless Transmitter WFT-E6A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Responding to Error Messages Are you connecting to the FTP server via a broadband router? X Some broadband routers use a firewall to restrict access to the FTP server. Change the firewall settings to allow access to the FTP server. X You may be able to access the FTP server by setting [Passive mode] to [Enable] on the transmitter (p.84). If you are using Windows XP Service Pack 2 or later, is access to the FTP server blocked by [Windows Firewall]? X Change the Windows Firewall settings to allow access to the FTP server. What to check on the network as a whole Does your network include a router or similar device that serves as a gateway? X If applicable, ask your network administrator for the network gateway address and enter it on the transmitter (p.23). X Make sure the gateway address setting is correctly entered on all network devices, including the transmitter. 42: FTP server rejected connection What to check on the FTP server Is the FTP server configured to restrict access to only some IP addresses? X Change the FTP server settings to allow access from the [IP address] configured on the transmitter in the TCP/IP settings. 43: Cannot connect to FTP server. Error code received from server. What to check on the FTP server Have you exceeded the maximum number of FTP server connections? X Disconnect some network devices from the FTP server or increase the maximum number of connections. 44: Cannot disconnect FTP server. Error code received from server. This error occurs if the transmitter fails to disconnect from the FTP server for some reason. X Turn off and on the FTP server and camera. 104