Canon ZR80 ZR80 Instruction Manual - Page 89
and select [AUDIO SETUP]. Select [MIX BALANCE], adjust the balance
UPC - 013803038330
View all Canon ZR80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
7. Press the STOP 3 button on the wireless controller to stop dubbing. Audio device: Stop playback. ZERO SET MEMORY REW PLAY FF 12bit AUDIO OUT STOP AUDIO DUB. PAUSE SLOW 2 AV INSERT AV DV REMOTESET E ❍ Use only tapes recorded in SP mode 12-bit audio sound with this camcorder. Audio dubbing will stop if the tape has a blank section or a section recorded in LP mode or 16-bit mode. ❍ You cannot use the DV terminal for audio dubbing. ❍ If you add sound to a tape not recorded with this camcorder, sound quality may decrease. ❍ Sound quality may decrease when you add sound to the same scene for more than 3 times. ❍ When you connect an audio device, check the picture on the LCD screen and the sound via built-in speaker or audio device. ZR90: You can also connect a TV via S-video terminal. ❍ When you use the built-in microphone, you can either connect a TV via AV terminal to check the picture, or headphones to check the sound. ZR90: When you connect a TV via S-video terminal, you can check the picture on the TV screen and the sound with headphones connected to the camcorder. ❍ Set the zero set memory at the end of the scene you wish to dub audio. The camcorder will automatically stop audio dubbing at that point. Editing Playing Back the Added Sound You can select to play back Stereo 1 (original sound), Stereo 2 (added sound), or adjust the balance of both sounds. CAMERA PLAY (VCR) CARD CAMERA CARD PLAY ( 39) AUDIO SETUP 12bit AUDIO•••STEREO1 1. Open the menu and select [AUDIO SETUP]. Select [12bit AUDIO], select a setting and close the menu. • STEREO 1: Plays back the original sound. • STEREO 2: Plays back the added sound. • MIX/FIXED: Plays back stereo 1 and stereo 2 in the same level. • MIX/VARI.: Plays back stereo 1 and stereo 2. The mix balance can be adjusted. 2. If you have selected [MIX/VARI.], adjust the mix level: Open the menu and select [AUDIO SETUP]. Select [MIX BALANCE], adjust the balance with the SET dial and close the menu. Turn the SET dial down to increase the volume of Stereo 1 and up to increase the volume of Stereo 2. 89