Canon iPF810 iPF810 User Manual - Page 578
Auto Band Adjustment (Auto Band Adj.), MAIN MENU, Adjust Printer, Auto Band Adj., Standard Adj.
UPC - 013803098464
View all Canon iPF810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 578 highlights
Adjusting the feed amount Auto Band Adjustment (Auto Band Adj.) If printed images are affected by banding in different colors, adjust the amount that paper is fed. Auto Band Adj. offers two modes, Standard Adj. and Advanced Adj.. Use Advanced Adj. if Standard Adj. does not eliminate banding, or when using paper other than genuine Canon paper or paper for purposes other than checking output. Always check the Feed Priority setting before using Auto Band Adj.. (→P.563) Note • When using highly transparent media not compatible with Auto Band Adj., you must adjust the feed amount manually. (→P.566) • If additional ne-tuning is necessary after Auto Band Adj., use Fine Band Adj.. (→P.568) • To adjust the measurement scale and ensure accuracy (so that lines in CAD drawings are printed at exactly the right length, for example), specify the amount of paper stretching or shrinkage when adjusting the feed amount. (→P.569) • This may take some time, depending on the type of paper. • Use paper of the same type and size for adjustment as you will use for printing. Paper to Prepare Rolls An unused roll at least 10 inches wide Sheets Standard Adj. : One sheet of unused paper of at least A4/Letter size Advanced Adj. : Two sheets of unused paper of at least A4/Letter size (or one sheet when using A2 or larger) Execute Auto Band Adj. as follows. 1. Load paper. • Attaching the Roll Holder to Rolls (→P.136) • Loading Rolls in the Printer (→P.139) • Loading Sheets in the Printer (→P.164) Note • Always make sure the loaded paper matches the type of paper specied. Adjustment cannot be completed correctly unless the setting value matches the loaded paper. 2. Press the Menu button to display MAIN MENU. 3. Press ▲ or ▼ to select Adjust Printer, and then press the ► button. 4. Press ▲ or ▼ to select Auto Band Adj., and then press the ► button. 5. Press ▲ or ▼ to select Standard Adj. or Advanced Adj., and then press the ► button. 564 Adjustments for Better Print Quality