Canon imageCLASS D480 imageCLASS D480 Starter Guide - Page 11
Connect Power Cord and Turn On the Machine - toner
View all Canon imageCLASS D480 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Connect Power Cord and Turn On the Machine 1 Connect the power cord into the rear socket on the back side of the machine and the wall outlet, and press the [I] side of the main power switch (A) to turn ON. 2 Set Up the Machine Do not connect the machine and the computer with a USB cable at this time. Connect the machine and the computer with a USB cable only during the software installation procedure. (A USB cable is not used when the machine is used via a network connection.) 2 The machine enters the standby mode. 100% LTR TEXT/PHOTO 1 ● The LCD display turned OFF: The machine may enter the Sleep mode while you are performing setup. Press [Energy Saver] to turn the display back ON and continue the setup. ● is displayed: Make sure that the toner cover and scanning platform are closed properly. (See "Install Toner Cartridge," on p. 4.) ● is displayed: Check the installation of the toner cartridge and the placement of the paper. (See "Install Toner Cartridge," on p. 4 and "Set Up Paper Cassette and Load Paper," on p. 7.)