Canon imageCLASS MF5950dw imageCLASS MF5960dn/MF5950dw Starter Guide - Page 6

Determining the Installation Site 50 3/8" (1,279 mm) 4" (100 mm) 4" (100 mm) 23 1/4" (590 mm) 4" (100 mm) 31 3/8" (795 mm) 4" (100 mm) 4" (100 mm) Notes on wireless LAN • This product is designed for indoor use 164'/50 m (may vary on the communication speed or environmental condition) or less away from an access point. Keep it at an appropriately close distance. • Check if masking is found or not. Communications across walls or between floors are generally deteriorated. Arrange appropriate installment. • Radio wave interference may occur if any radiowave emitting equipment (i.e. microwave) is found near the product and its radiowave is in the same frequency band as the radiowave used by a wireless LAN. Keep the product away from those radio wave interference sources as much as possible. Carr ying the Machine to the Installation Site and Removing the Packing Materials 1. Take the machine out of the plastic bag, and then carry to the installation site. Hold the grips. Carry the machine. 2. Remove the packing materials. * The packing materials may be changed in form or placement, or may be added or removed without notice. Remove the packing materials. Remove the unpacking manual. * Do not remove the cap (A) on the USB port at this stage. Uncap when installing for USB connection. (A) 6