Canon imageFORMULA DR-7550C User Manual - Page 66
USB Short Packet Setting, Stand-by Mode Setting
View all Canon imageFORMULA DR-7550C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
■ Continuous Manual Feeding Mode Setting Chapter 4 Other Functions ■ SCSI Speed Setting This mode disables automatic feeding by the pickup roller, so that the loaded document stack must be fed by hand one sheet at a time by the operator. (See "Continuous Manual Feeding Mode" on p. 3-12.) ON: The pickup roller is disabled. OFF: Documents are fed by the pickup roller. ■ Stand-by Mode Setting Selects the amount of time (240, 60 or 10 minutes) from when the scanner is last used to when the Stand-by mode is activated. ■ Display Language Setting Selects English, Japanese or French for the language to display on the control panel. EN: English display panel JP: Japanese display panel FR: French display panel ■ Display Contrast Adjustment Selects the scanner's SCSI transfer speed. If the scanner does not operate normally with the default [20] (20 MBytes/s) speed, change this setting to reduce the speed to [10] (10 MBytes/s) or [5] (5 MBytes/s). ■ USB Short Packet Setting If the scanner does not operate normally when using the USB interface, change this setting to [OFF]. ■ Tray Position Setting The document feed tray should be set to fit the number of document sheets to be loaded. (See "Preparing the Document Feed Tray" on p. 3-6.) For the DR-6050C 0: Up to 300 sheets 1: Up to 100 sheets For the DR-7550C/9050C 0: Up to 500 sheets 1: Up to 300 sheets 2: Up to 100 sheets Use to adjust display panel contrast. 4-11