Canon imageFORMULA DR-9050C Reference Guide - Page 49
Removing and Reinstalling the Rollers, Maintenance
View all Canon imageFORMULA DR-9050C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Removing and Reinstalling the Rollers Follow the procedure shown below to remove and reinstall the rollers when you need to clean or replace the Pickup, Feed, or Retard Rollers. 2. Open the roller cover. CAUTION • Turn OFF the power switch, and disconnect the power plug from the power outlet when you remove or reinstall the rollers. Leaving the power turned ON may result in an electric shock. • Do not place excessive force on the rollers when removing or reinstalling the rollers. Deformation of the rollers may cause feed errors. 3. Open the roller holder. 3 Pickup Roller Feed Roller Maintenance Retard Roller ■ Removing and Reinstalling the Pickup Roller 1. Press the Open/Close button and carefully raise the upper unit until it stops. Hint The roller holder returns to its original position when released. 4. Remove the pickup roller. Open/Close Button 41