Canon imageFORMULA P-208II Scan-tini Personal Document Scanner User Manual - Page 28

Loading cards, When scanning plastic cards, scan cards one at a time using the, following procedure.

Get Canon imageFORMULA P-208II Scan-tini Personal Document Scanner PDF manuals and user guides View all Canon imageFORMULA P-208II Scan-tini Personal Document Scanner manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

Loading cards When scanning plastic cards, scan cards one at a time using the following procedure. 1 Open the document feed tray. 2 As shown in the figure, with the document feed tray opened, pull the tray toward you. 3 Vertically insert the card directly into the feed inlet, and with the back facing up. 4 Adjust the document guide so that it makes contact with both edges of the card. The card will be fed when you start scanning. As shown in the figure, pull the center part of the document feed tray (see enlarged image) all the way out toward you.  If you are scanning an embossed card, load the card with the embossed side facing up.  Embossed cards may not be scanned correctly, depending on the type of embossment.  After a card is scanned, it is ejected from the back of the scanner. Do not place objects behind the scanner. 5 When the scan is finished, set the document feed tray back to its original position. 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
27
Loading cards
When scanning plastic cards, scan cards one at a time using the
following procedure.
1
Open the document feed tray.
2
As shown in the figure, with the document feed tray opened, pull the
tray toward you.
As shown in the figure, pull the center part of the document feed tray
(see enlarged image) all the way out toward you.
3
Vertically insert the card directly into the feed inlet, and with the back
facing up.
4
Adjust the document guide so that it makes contact with both edges
of the card.
The card will be fed when you start scanning.
If you are scanning an embossed card, load the card with the
embossed side facing up.
Embossed cards may not be scanned correctly, depending on the
type of embossment.
After a card is scanned, it is ejected from the back of the scanner. Do
not place objects behind the scanner.
5
When the scan is finished, set the document feed tray back to its
original position.