Canon imagePROGRAF TA-30 MFP L36ei series User Manual - Page 90
Select sheets as the paper source., Use the paper alignment line to align and load the sheets.
View all Canon imagePROGRAF TA-30 MFP L36ei manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Note • For how to remove the roll holder, see "Removing the Roll from the Printer." 2. Select sheets as the paper source. • If a print job was received Sheets are automatically selected, and the media type and size specified by the print job are shown on the operation panel. Tap OK and Load paper. • If no print job was received 1. Tap Load paper or Replace paper. 2. Tap Load cut sheet or Replace cut sheet. Note • If the Home screen does not appear, press the HOME button. Note • If any paper has been advanced that will not be used, a message is shown requesting you to remove it. Follow the instructions on the screen to remove the paper, and redo the operation. 3. Use the paper alignment line to align and load the sheets. With its print side up, load a sheet in the paper feed slot, with the right edge aligned with the paper alignment line's white line (A), and then insert the sheet into the paper slot. Insert the paper until the leading edge makes contact. An alarm sounds when the paper is inserted into the paper feed position. 90