Canon imagePROGRAF TM-200 series User Manual - Page 58
Holding it at the positions indicated, close the roll paper cover.
View all Canon imagePROGRAF TM-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
• When selecting Barcodes in Manage remaining roll amount and if the barcode is not printed. A menu for selection of the media type and length is shown on the operation panel. Operate the operation panel, select the media type to be used, and enter its length. Important • When selecting Enable in Keep media type, there is no need to specify the type of the paper. • Cut the edge of the roll using the Cut paper function if the edge is creased or soiled. (See "Specifying the Cutting Method for Rolls.") • When selecting the media type on the operation panel, make sure the media type set in the printer driver and the media type loaded on the printer match. Note • For details on media types that you can select, see "Paper Information List." 8. Holding it at the positions indicated, close the roll paper cover. Note • Cut the edge of the roll after the paper is advanced if it is soiled or if there are cuts from scissors or the blade after removing creased edges. (See "Specifying the Cutting Method for Rolls.") • Adjusting the printhead alignment with the type of paper to be used in printing may enhance printing quality. (See "Automatic Adjustment to Straighten Lines and Colors.") 58