Canon imagePROGRAF TM-300 MFP L36ei TM-305 / TM-300 / TM-205 / TM-200 Setup Gu - Page 3

Assembling the Stand ∙ When using the stand -> Assemble the stand on which you will install the printer by referring to the Printer Stand Setup Guide (separate manual). ∙ When not using the stand -> Proceed to "Installing the Printer". Installing the Printer 1 Remove the packaging material. 2 Remove all of the tape and other packaging material. Remove the tape affixed to the roll holder. 3 Have 3 people lift up the printer. Have 1 person grasp the carrying handles at the bottom of each side, and 1 person grasp the handles in the middle of the rear side. • Moving the printer requires at least 3 people, holding it on the left, right, Caution and rear sides. Be careful to avoid back strain and other injuries due to the weight of the printer. ∙ TM-305: Approx. 108 lb (49 kg) ∙ TM-300: Approx. 106 lb (48 kg) ∙ TM-205: Approx. 91 lb (41 kg) ∙ TM-200: Approx. 91 lb (41 kg) • When moving the printer, firmly grasp the carrying handles (A) under each side and at the rear side. Holding the printer at other positions is dangerous and cause injury and damage if the printer is dropped. A A A 3