Canon imagePROGRAF TM-300 MFP T36 Guide for Media Configuration Tool - Page 123
Paper Thickness Head Height, Transport Unit Vacuum Strength, Transport, Unit Vacuum Strength
View all Canon imagePROGRAF TM-300 MFP T36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Important • If you set Paper Thickness (Head Height) too low, the printhead might rub against the paper. If the printhead rubs against the paper, there will be scratches in the printing results and the printhead may be damaged. Transport Unit Vacuum Strength Sets the vacuum strength for paper on the platen. If the printhead is rubbing against the paper, this may be fixed by increasing the strength of the vacuum. If the edges of images are washed out, this may be fixed by decreasing the strength of the vacuum. Auto Automatically sets the vacuum strength that matches the selected base paper. Weak/Medium-weak/Standard/Medium-strong/Strong You can select from among five available levels. Note • If the paper thickness is 0.004 inch (0.1 mm) or less, it is recommended that Transport Unit Vacuum Strength be set to Weak. Important • If changes are made to the Transport Unit Vacuum Strength, check that there is no rubbing against the paper. (If the printhead rubs against the paper, there will be scratches in the print results.) If the printhead rubs against the paper, the printhead may be damaged. 4. Calibration Target sheet 123