Canon imagePROGRAF TM-300 TM-305 / TM-300 / TM-205 / TM-200 Setup Guide - Page 8

Push the print head lock lever all the way to the end.

Get Canon imagePROGRAF TM-300 PDF manuals and user guides View all Canon imagePROGRAF TM-300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

6 Insert the print head into the carriage (B) with the ink holes (A) on the upper side and facing towards you as shown in the figure. Carefully push the print head firmly into the carriage (B), ensuring that the part covered by the protective caps does not touch the carriage. 7 Pull the print head locking cover down toward the front to lock the print head in place. A B 8 Push the print head lock lever all the way to the end. 9 Check that the angle adjustment lever is aligned with the position of the red ■ (A). If it is not aligned, align the angle adjustment lever with the red ■ (A). A 10 Close the top cover. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
8
6
Insert the print head into the carriage (B) with the ink holes (A)
on the upper side and facing towards you as shown in the figure.
Carefully push the print head
firmly into the
carriage (B), ensuring
that the part covered by the protective caps does not touch the
carriage.
A
B
7
Pull the print head locking cover down toward the front to lock the
print head in place.
8
Push the print head lock lever all the way to the end.
9
Check that the angle adjustment lever is aligned with the position of
the red
■
(A). If it is not aligned, align the angle adjustment lever with
the red
■
(A).
A
10
Close the top cover.