Canon imagePROGRAF iPF6450 User Guide - Page 537

iPF6450 4 Holding the Roll Holder flange (a), load the Roll Holder shaft into the guide grooves (b) on both sides of the Roll Holder Slot. At this time, load the shaft so that the color of the Roll Holder shaft (c) matches the color of the guide groove. Loading Rolls in the Printer Handling and Use of Paper Handling rolls • Do not release the flanges until you load the holder fully in the Roll Holder Slot. Rolls are heavy, and dropping a roll Caution may cause injury. • Be careful not to pinch your fingers between the guide grooves (b) and the Roll Holder shaft (c) when loading rolls. • Do not force the Roll Holder into the printer with the right and left ends reversed. Otherwise, it may damage the Important printer or Roll Holder. • If it is difficult to load rolls from the front of the printer, load rolls from the back of the printer. Note If the printer has a Spectrophotometer Unit (option), lowering the Up-down Unit makes it easier to perform operations from the front of the printer. (See "Lowering the Up-down Unit of the Spectrophotometer Unit (option) Manually.") →P.555 5 Insert the edge of the roll in the Paper Feed Slot (a) and advance the roll until you hear the feed tone. • Be careful not to soil the printing surface of roll paper as you insert it in the slot. This may affect the printing quality. Important We recommend wearing clean cloth gloves when handling rolls to protect the printing surface. • If the paper is wrinkled or warped, straighten it out before loading it. • Load paper straight so it is not fed askew. 537 User's Guide