Canon imagePROGRAF iPF8300S iPF8300S Basic Guide No.3
Canon imagePROGRAF iPF8300S Manual
 |
View all Canon imagePROGRAF iPF8300S manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon imagePROGRAF iPF8300S manual content summary:
- Canon imagePROGRAF iPF8300S | iPF8300S Basic Guide No.3 - Page 1
Large-Format Printers Basic Guide Please read the following electronic manuals also. • User's Guide • Paper Reference Guide Printer Relocation Software Installation 3 This Basic Guide includes three booklets. Be sure to read " Safety Precautions" in the first booklet, Printer Operations. Printer - Canon imagePROGRAF iPF8300S | iPF8300S Basic Guide No.3 - Page 2
is, when you execute the printer menu item to prepare for transfer). • Ink must be drained before Level 2 or Level 3 printer transfer, as described in the following table. Prepare a Maintenance Cartridge in advance. • Always follow the instructions of the service representative when transferring the - Canon imagePROGRAF iPF8300S | iPF8300S Basic Guide No.3 - Page 3
Cover. Remove the ink tanks before packing the printer. • If consumables must be replaced, the message Consumables must be replaced. Call for service. is shown on the Display Screen and preparation is not possible. If this message is displayed, press the OK button and contact your Canon dealer for - Canon imagePROGRAF iPF8300S | iPF8300S Basic Guide No.3 - Page 4
Preparing to Transfer the Printer Remove the Ink Tank 1 Open the left and right ink tank covers. 2 Lift the stopper (a) of the Ink Tank Lock Lever. Lift the Ink Tank Lock Lever until it stops, and then push it down to the front. 3 Hold the Ink Tank by the handle (a) and remove it. a a • Store - Canon imagePROGRAF iPF8300S | iPF8300S Basic Guide No.3 - Page 5
6 Close the Ink Tank Cover. Preparing to Transfer the Printer At this point, ink is drawn out from inside the tubes. • Do not remove the Maintenance Cartridge during this process. Ink may leak out. When the process is finished, Preparations for moving the printer finished. Turn the power off is - Canon imagePROGRAF iPF8300S | iPF8300S Basic Guide No.3 - Page 6
you accidentally unplug the printer, plug it in again, reinstall the ink tanks, and follow this procedure again. 2 Disconnect the power cord, interface cable, and Media Take-up Unit Power Inlet. 3 Open the Top Cover and lift the Ejection Guide. 4 Remove the four ejection supports and lower the - Canon imagePROGRAF iPF8300S | iPF8300S Basic Guide No.3 - Page 7
the Belt, insert it between the Belt Stopper, and affix the Belt Stopper with a hex screw at the position indicated. Preparing to Transfer the Printer • Here, the Belt Stopper is the one that was removed and stored after initial installation. Neglecting to attach the Belt Stopper may damage the - Canon imagePROGRAF iPF8300S | iPF8300S Basic Guide No.3 - Page 8
basic workflow for reinstalling the printer is as follows. For detailed instructions, see the Setup Guide. Assemble the stand • The to the Printer Stand Setup Guide, assemble the Stand. Install the printer • The iPF8300S alone weighs approximately 111 kg (244.7 lb). Moving the printer requires at - Canon imagePROGRAF iPF8300S | iPF8300S Basic Guide No.3 - Page 9
Attach the media take-up unit (optional) Referring to the Setup Guide included with the Media Take-up Unit, attach the Media Take-up Unit. Remove the packaging material Remove tape and packaging material attached to the printer. Connect the power cord Connect one end of the power cord to the Power - Canon imagePROGRAF iPF8300S | iPF8300S Basic Guide No.3 - Page 10
Reinstalling the Printer Install the ink tanks Open the Ink Tank Cover and install the ink tanks. Install the software and electronic manuals Note that the driver installation procedure varies depending on the type of connection. (→ , Installing the Software (Windows)) (→ , Installing the Software ( - Canon imagePROGRAF iPF8300S | iPF8300S Basic Guide No.3 - Page 11
Load rolls in the printer Load the Roll Media in the printer. (→ , Loading Rolls in the Printer) Reinstalling the Printer 11 - Canon imagePROGRAF iPF8300S | iPF8300S Basic Guide No.3 - Page 12
instructions, see the Setup Guide. Compatible operating systems Windows 7, Windows Vista, Windows Server 2008 R2, Windows Server 2008, Windows Server 2003 R2, Windows Server 2003 and Windows XP • For the Windows OS, use the latest version of Service Pack. Supported connection methods The printer - Canon imagePROGRAF iPF8300S | iPF8300S Basic Guide No.3 - Page 13
click Restart. Software settings take effect after the computer restarts. Next, install the electronic manuals. 5 When the Install User Manual dialog box is displayed, insert the provided User Manuals CD-ROM in the CDROM drive and follow the instructions displayed to complete installation. 13 - Canon imagePROGRAF iPF8300S | iPF8300S Basic Guide No.3 - Page 14
. For detailed instructions, see the Setup Guide. Compatible operating systems Mac OS X 10.4.11 or later Supported connection methods The printer driver works over USB or network (Bonjour or IP) connections. Follow these steps to install the software and electronic manuals. Installing the software - Canon imagePROGRAF iPF8300S | iPF8300S Basic Guide No.3 - Page 15
computer or the network. 6 Click Next and follow the instructions displayed to register the printer to set up and update the paper information. Installing the Software (Mac OS X) Next, install the electronic manuals. 7 Insert the provided User Manuals CD-ROM in the CDROM drive and follow the - Canon imagePROGRAF iPF8300S | iPF8300S Basic Guide No.3 - Page 16
This section summarizes some convenient features of the printer driver. For detailed printer driver instructions, see the User's Guide. Print Preview Using the print preview function enables the following. • Check an image of the document as arranged on the paper, in the position it will be printed - Canon imagePROGRAF iPF8300S | iPF8300S Basic Guide No.3 - Page 17
within the roll width. This enables you to conserve paper. Convenient Printer Driver Features • If the page would exceed the roll paper width after rotation, you can use this function with Scale to fit Roll Paper Width to print rotated pages. Instructions in Windows and Mac OS Windows • Access the - Canon imagePROGRAF iPF8300S | iPF8300S Basic Guide No.3 - Page 18
Convenient Printer Driver Features Borderless Printing In regular printing, a margin required by the printer is added around the original. With borderless printing, you can print documents without the margin, so that the printed image covers the entire surface of the paper. Instructions in Windows - Canon imagePROGRAF iPF8300S | iPF8300S Basic Guide No.3 - Page 19
Large-Format Printing Convenient Printer Driver Features You can create vertical or horizontal banners by printing originals in banner formats on rolls. Originals created in Microsoft Word or other applications in your preferred size can be enlarged to fill the width of roll paper by completing - Canon imagePROGRAF iPF8300S | iPF8300S Basic Guide No.3 - Page 20
Convenient Printer Driver Features Enlarged/Reduced Printing Originals can be printed at larger or smaller sizes, as desired. Instructions in Windows and Mac OS Windows • Access the Page Setup sheet. • Click the width of the loaded roll in the Roll Paper Width list. • In the Page Size list, click - Canon imagePROGRAF iPF8300S | iPF8300S Basic Guide No.3 - Page 21
profile. • For Print Plug-In details, see the User's Guide. • Print Plug-In for Office is also included, for easy large-format printing from Microsoft Office applications. For detailed instructions, refer to the User's Guide. Accessing the Print Plug-In Adobe Photoshop • Start Adobe Photoshop. • Open - Canon imagePROGRAF iPF8300S | iPF8300S Basic Guide No.3 - Page 22
Guide 6 Ejection support 6 Enlarged/reduced printing 20 I Ink hole 4 Ink Tank Cover 4, 10 Ink Tank Lock Lever 4 Installing the Software (Mac OS X 14 Installing the Software (Windows 12 IP 12, 14 L Large-format printing 19 M Media Take-up Unit 9 P Page rotation by 90 degrees (paper - Canon imagePROGRAF iPF8300S | iPF8300S Basic Guide No.3 - Page 23
- Canon imagePROGRAF iPF8300S | iPF8300S Basic Guide No.3 - Page 24
. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan Canon U.S.A., Inc. One Canon Plaza, Lake Success, NY 11042 U.S.A Canon Europe Ltd. 3 The Square, Stockley Park, Uxbridge, Middlesex, UB11 1ET United Kingdom Canon (China) Co., Ltd. 15F Jinbao Building No.89 Jinbao Street, Dongcheng District
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
 |
 |
Printer Relocation
Software
Installation
3
1
Printer Operations
2
Troubleshooting
Read this manual before attempting to operate the printer.
Keep this manual in a handy location for future referencing.
This Basic Guide includes three booklets.
Be sure to read "
Safety Precautions" in the
fi
rst
booklet,
Printer Operations.
ENG
3
Printer Relocation
Software Installation
Basic Guide
Large-Format Printers
Please read the following electronic
manuals also.
• User's Guide
• Paper Reference Guide
Preparing to Transfer the Printer
......................
2
Reinstalling the Printer
.....................................
8
Installing the Software (Windows)
..................
12
Installing the Software (Mac OS X)
................
14
Convenient Printer Driver Features
................
16
Troubleshooting
................................................
2
If Roll Paper Jams
..........................................
20
If a Sheet Jams
...............................................
22
If Paper is Soiled
............................................
24
If Printing is Faint
............................................
26
If Vertical Lines are Warped or Colors are
Misaligned
..................................................
27
If Banding Occurs
...........................................
29
If Line Length Does Not Match
.......................
31
Error Messages
..............................................
33
Safety Precautions
........................................
2
The Manuals Supplied with This Printer
...........
5
How to read the Basic Guides
..........................
6
Parts
.................................................................
8
Attaching the Roll Holder to Rolls
...................
12
Loading Rolls in the Printer
............................
14
Removing the Roll from the Printer
................
18
Loading Sheets in the Printer
.........................
20
Removing Sheets
...........................................
22
Consumables
..................................................
23
Replacing Ink Tanks
.......................................
24
Replacing the Maintenance Cartridge
............
30
Replacing the Printhead
.................................
36
Menu Map
.......................................................
42