Canon imagePROGRAF iPF8400 User Guide - Page 585

Handling and Use of Paper iPF8400 Loading the Rewind Spool on the Media Take-up Unit Premium Matte Paper Roll Type Weight Flange to Use Weight Flange 2 *1: If you cannot retract stiff paper well using Weight Flange 1 or if the diameter of the retracted paper is wider than the Rewind Spool, use Weight Flange 2. When using Weight Flange 2, adjust the paper feed amount by executing Auto(GenuinePpr) or Auto(OtherPaper). (See "Automatic Banding Adjustment.") →P.812 • Do not use combinations other than those identified here. Important • Insert the Weight Flange and Weight Joint firmly on the Weight Roll. • Use identical Weight Flange on the left and right ends. Insert matching Weight Flanges (1 or 2) on both ends of the Weight Roll. • Keep unused weight rolls, weight joints, and weight flanges handy by putting them in the box and putting the box Note under the Stand. 17 Set the Weight Roll gently on top of the slack in the roll paper. The media take-up unit is now ready for use. Printed rolls can now be rewound automatically. Media take-up unit • Always set the Weight Roll on the paper. Failure to do this may cause rewinding problems. Important • When setting the Weight Roll on the paper, avoid touching the paper core and causing the wound roll to become misaligned on the left and right end. If it is misaligned on the left and right ends, a rewinding problem may result. • When the media take-up unit is in use, an icon indicating the take-up Note mode is shown on the Display Screen. 585 User's Guide