Casio CW-E60 User Guide - Page 25
Troubleshooting - driver
UPC - 079767174149
View all Casio CW-E60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Troubleshooting Consult this troubleshooting guide whenever you start to have problems with the printer. If you cannot find the solution to your problem below, contact your original retailer. Symptom I can't get a connection between the printer and a computer. The printing operation is finished normally, but nothing is printed. Printing is not clear. Printing is poor quality. Printing is too light. The printed color is different from the ink ribbon color. Possible Cause The bundled USB cable or the AC adaptor is not connected properly. The USB driver is not installed correctly. Though the USB driver is installed correctly, data communication is not possible for some reason. The ink ribbon is used up. Any of the following can interfere with proper printing. • A disc printing surface that is not smooth and flat • A disc printing surface that has a design or lines printed on it • A disc printing surface that supports ink jet printing only The ink ribbon cassette is not loaded properly. The color of the final printout is affected by both the color of the ink ribbon and the color of the disc you are printing on. - 25 - Recommended Action Re-connect the cable and the AC adaptor properly. Unplug the USB cable and the plug it back in again. Try using a different USB port on your computer, or try using a different USB cable. Load a new ink ribbon cassette (option). Use a disc that meets the requirements described in the bundled "Printing Precautions" or at the following Internet URL. http://world.casio.com/ds/media/ You can also try adjusting the print density to make it darker. (See the DISC TITLE PRINTER Application User's Guide) Re-load the ink ribbon cassette properly. Try using a lighter color disc or a darker color ink ribbon.