Casio EX S500 Owners Manual - Page 226
USB driver is not installed., Camera is turned off.
UPC - 079767684167
View all Casio EX S500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 226 highlights
Playback APPENDIX Symptom Color of the playback image is different from the image on the monitor screen during recording. Images are not displayed. Possible Cause Sunlight or light from another source is shining directly into the lens during recording. A memory card with non-DCF images recorded with another camera is loaded in the camera. All buttons and switches are disabled. Monitor screen is off. Circuit problem caused by electrostatic charge, impact, etc. while the camera was connected to another device. USB communication is in progress. Cannot transfer files over a USB connection. 1) Camera is not set securely on the USB cradle. 2) USB cable is not connected securely. 3) USB driver is not installed. 4) Camera is turned off. Action Position the camera so sunlight does not shine directly into the lens. This camera cannot display non-DCF images recorded onto a memory card using another digital camera. Remove the battery from the camera, reinsert it, and then try again. After confirming that the computer is not accessing camera memory, disconnect the USB cable. 1) Check the connection between the camera and USB cradle. 2) Check all connections. 3) Install the USB driver on your computer (page 180). 4) Press the [USB] button on the USB cradle. Other 226