Casio EX-Z33LP Owners Manual - Page 111
Configuring USB Protocol Settings (USB)
UPC - 079767493172
View all Casio EX-Z33LP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Configuring USB Protocol Settings (USB) Procedure [MENU] * Set Up Tab * USB You can use the procedure below to select the USB communication protocol, which is used when exchanging data with a computer, printer, or other external device. Mass Storage Select this setting when connecting to a computer (pages 86, 95). With this setting, the computer sees the camera as an external storage device. Use this setting for normal transfer of images from the camera to a computer. PTP (PictBridge) Select this setting when connecting to a printer that supports PictBridge (page 79). This setting simplifies the transfer of image data to the connected device. Selecting the Screen Aspect Ratio and Video Output System (Video Out) Procedure [MENU] * Set Up Tab * Video Out You can use the procedure in this section to select either NTSC or PAL as the video output system. You can also specify an aspect ratio of 4:3 or 16:9. NTSC Video system used in Japan, the U.S., and other countries PAL Video system used in Europe and other areas 4:3 16:9 Normal TV screen aspect ratio Wide screen aspect ratio • Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use. Images will not display correctly if you select the wrong aspect ratio. • Images will not display correctly unless the camera's video signal output setting matches the video signal system of the TV or other video equipment. • Images cannot be displayed correctly on a TV or video equipment that is not NTSC or PAL. • An optionally available AV cable (EMC-4A) is required for video output. 111 Other Settings (Set Up)