Casio WK3800 Instruction Manual
Casio WK3800 Manual
 |
View all Casio WK3800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Casio WK3800 manual content summary:
- Casio WK3800 | Instruction Manual - Page 1
CASIO WK-3300, WK-3800, WK-8000, PX-410R and PX-575R. Contents Part I MIDI Message Overview 1 Product Configuration as a MIDI Volume (07H) ...12 10.5 Pan (0AH)...12 10.6 Expression (0BH) ...12 10.7 General Use Controllers 1 through 8 (10H through 13H, 50H through 53H 13 10.8 Hold1 (40H) ...13 - Casio WK3800 | Instruction Manual - Page 2
On (7DH)...23 11.4 Mono (7EH) ...23 11.5 Poly (7FH) ...23 12 Program Change ...24 12.1 About the Part Mode...24 13 Channel Aftertouch ...24 14 Pitch Bend ...25 Part III System Message 15 Active Sensing ...25 16 System Exclusive Message ...26 16.1 Universal Realtime System Exclusive Message 26 - Casio WK3800 | Instruction Manual - Page 3
Part IV This Model's System Exclusive Messages 17 Format ...31 17.1 Message Classifications ...31 17.2 Message Structures...32 17.2.1 1...SYSEX : System Exclusive message Status 32 17.2.2 2...MAN : Manufacturer's ID ...32 17.2.3 3...MOD : Model ID ...32 17.2.4 4...dev : MIDI Part Patch Part Parameter - Casio WK3800 | Instruction Manual - Page 4
Data...64 35 User Rhythm Pattern ...64 36 Registration Data ...65 37 User Drawbar Parameter Set ...66 38 SMF Parameter Set ...66 39 Flash Memory Image Parameter Set 67 40 About Parameter Set (PS) numbers 68 40.1 WK-3300/WK-3800/WK-8000...68 40.2 PX-410R/PX-575R ...68 Part VII DSP Parameter List - Casio WK3800 | Instruction Manual - Page 5
41.18 41.19 41.20 41.21 41.22 41.23 41.24 41.25 41.26 41.27 41.28 41.29 41.30 Algorithm 17 (11H) : Sin 2-Phase Chorus 71 Algorithm 18 (12H) : 3-Phase Chorus 71 Algorithm 19 (13H) :Tri 2-Phase Chorus 71 Algorithm 20 (14H) : Stereo Delay 1 71 Algorithm 21 (15H) : Stereo Delay 2 71 Algorithm 22 ( - Casio WK3800 | Instruction Manual - Page 6
Part VIII Setting Values and Send/Receive Values 43 Setting Value Table ...80 43.1 Off/On Setting Value 82 43.17 Drawbar Position Setting Value Table 82 43.18 Drawbar Percussion Setting Table ...82 Part IX 43.19 43.20 MIDI Implementation Notation Hexadecimal Notation ...83 Binary Notation ...83 6 - Casio WK3800 | Instruction Manual - Page 7
Independent Sub-blocks (1 to 16) ∗ Instrument part sub-block ∗ Mixer independent sub-block 1.1 Controller Block The Controller Block issues messages for the following: keyboard, real-time controllers (bender wheel, WK-3300 modulation switch, WK-3800/WK-8000 modulation wheel, etc.), song memory - Casio WK3800 | Instruction Manual - Page 8
destination. 2 Conditions that Disable Message Send and Receive All MIDI message send and receive is temporarily disabled while any one of the following processes is in progress. • System Initialization • FD formatting (WK-3800 only) • SD memory card formatting 3 Conditions that Disable Bulk - Casio WK3800 | Instruction Manual - Page 9
is playing or the parameter that was changed. When the performance part or part for which the parameter setting is changed is Part 1, however, the value depends on the Transpose/ Function Keyboard Channel value. The MIDI Channel of the message that is sent when the DSP setting is changed depends - Casio WK3800 | Instruction Manual - Page 10
ccH vvH n: MIDI Channel Number cc: Control Number vv: Value Send Sent when this Model's modulation button (WK-3300 only), modulation wheel (WK-3800/WK-8000 only), or drawbar organ settings cannot be configured for each part, but multiple parts can use the same drawbar organ settings. At this time - Casio WK3800 | Instruction Manual - Page 11
" in this document, and the separate Appendix A that accompanies with this Model. 10.2 Modulation (01H) Format Message Format: BnH 01H vvH n: MIDI Channel Number vv: Value Send (WK-3300/WK-3800/WK-8000) Sent when WK-3300 modulation button or WK-3800/WK-8000 modulation wheel, which is assigned to - Casio WK3800 | Instruction Manual - Page 12
value that is sent and received. Send Sent when the volume of Mixer Part 1 through 16 is changed. Receive Receipt changes the Mixer Part Volume. 10.5 Pan (0AH) Format Message Format: BnH 0AH vvH n: MIDI Channel Number vv: Value (Note 1) Note 1: For information about the relationship between setting - Casio WK3800 | Instruction Manual - Page 13
corresponding send value depend on the parameter. Send Sent when the WK-3300 modulation button or WK-3800/WK-8000 modulation wheel assigned to a DSP Parameter is operated, and when this Model's DSP edit function is used to change the DSP Parameter value. Receive Receipt changes the DSP Parameter - Casio WK3800 | Instruction Manual - Page 14
receive values, see the "43.1 Off/On Setting Value Table" in "Part VIII Setting Values and Send/Receive Values." Send Sent when the assignable jack operation. 10.10 Soft (43H) Format Message Format: BnH 43H vvH n: MIDI Channel Number vv: Value (Note 1) Note 1: For information about the relationship - Casio WK3800 | Instruction Manual - Page 15
Attack Time (49H) Format Message Format: BnH 49H vvH n: MIDI Channel Number vv: Value (Note 1) Note 1: For information about the relationship between setting values and send/receive values, see "43.5 -64 to 0 to 63 Setting Value Table" in "Part VIII Setting Values and Send/Receive Values". Send Sent - Casio WK3800 | Instruction Manual - Page 16
Depth (4DH) Format Message Format: BnH 4DH vvH n: MIDI Channel Number vv: Value (Note 1) Note 1: For information about the relationship between setting values and send/receive values, see "43.5 -64 to 0 to 63 Setting Value Table" in "Part VIII Setting Values and Send/Receive Values". Send Sent when - Casio WK3800 | Instruction Manual - Page 17
that is sent and received. Send Sent when Reverb Send of Mixer Part 1 through 16 is changed. Receive Receipt changes Reverb Send of Mixer Part 1 through 16. 10.19 Chorus Send (5DH) Format Message Format: BnH 5DH vvH n: MIDI Channel Number vv: Value (Note 1) Note 1: The setting value matches the - Casio WK3800 | Instruction Manual - Page 18
Resonance Format Message Format: BnH 62H 21H 63H 01H 06H mmH 26H **H n: MIDI Channel Number mm: Value (Note 1) **: Ignored Note 1: For information about the , see "43.5 -64 to 0 to 63 Setting Value Table" in "Part VIII Setting Values and Send/Receive Values". Send This message is never sent. Receive - Casio WK3800 | Instruction Manual - Page 19
values, see the "43.1 Off/On Setting Value Table" in "Part VIII Setting Values and Send/Receive Values." Send Sent when Click of Drawbar Percussion Format Message Format: BnH 62H 0BH 63H 40H 06H mmH 26H **H n: MIDI Channel Number mm: Value (Note 1) **: Ignored Note 1: For information about the - Casio WK3800 | Instruction Manual - Page 20
changes 3rd Percussion the Drawbar Organ Parameter. 10.20.7 Percussion Decay Time Format Message Format: BnH 62H 0CH 63H 40H 06H mmH 26H **H n: MIDI Channel Number mm: Value (Note 1) **: Ignored Note 1: The setting value matches the value that is sent and received. Send Sent when Percussion Decay - Casio WK3800 | Instruction Manual - Page 21
through 16 is changed by operation of this Model. Receive Receipt changes Coarse Tune of Mixer Part 1 through 16. 10.21.4 Modulation Depth Format Message Format: BnH 64H 05H 65H 00H 06H mmH 26H 00H n: MIDI Channel Number mm: Value (Note 1) Note 1: The setting value matches the value that is sent and - Casio WK3800 | Instruction Manual - Page 22
. 10.23 Reset All Controllers (79H) Format Message Format: BnH 79H 00H n: MIDIChannelNumber Send Sent when the song function is used. Receive Receipt initializes controller values as shown below. Message Number Controller Value Control Change 01H Modulation 00H 02H Breath Controller 00H - Casio WK3800 | Instruction Manual - Page 23
) Format Message Format: BnH 7FH 00H n: MIDIChannelNumber Send These messages are never sent. Receive Receipt of any of these messages releases (same as releasing the keyboard key) the currently sounding voice. 23 - Casio WK3800 | Instruction Manual - Page 24
pp: Program Number Send Sent when a tone is selected. See the separate Appendix A that accompanies with this Model for details about program numbers. Receive Receipt changes the tone of the part corresponding to the MIDI Channel. The selected tone is determined by the program value of this message - Casio WK3800 | Instruction Manual - Page 25
and the Pitch Bend Sensitivity, whose setting is configured by RPN. Part III System Message 15 Active Sensing Format Message Format: FEH Send This message is received once, the Active Sensing mode is entered. If no MIDI Message is received for a particular amount of time, voices being sounded by - Casio WK3800 | Instruction Manual - Page 26
Value MSB (Note 1) Note 1: For information about the relationship between setting values and send/receive values, see "43.6 Pan Setting Value Table" in "Part VIII Setting Values and Send/Receive Values". Send This message is never sent. Receive Receipt changes the Master Pan parameter. Note that the - Casio WK3800 | Instruction Manual - Page 27
values, see "43.7 -99 to 0 to 99 Setting Value Table" in "Part VIII Setting Values and Send/Receive Values". Send Sent when the Fine Tune parameter of parameter. Acoustic Resonance Operations (PX-410R/PX-575R) When Acoustic Resonance used by piano tones is selected, the Fine Tune of the piano string - Casio WK3800 | Instruction Manual - Page 28
(Note 1) Note 1: For information about the relationship between setting values and send/receive values, see "43.11 Chorus Type Setting Value Table" in "Part VIII Setting Values and Send/Receive Values." Send Sent when the Chorus Type parameter of System Chorus is changed. Receive Receipt changes the - Casio WK3800 | Instruction Manual - Page 29
Receive Receipt changes the Chorus Rate parameter of System Chorus. Depth Format Message Format: F0H 7FH 7FH 04H 05H 01H 01H 01H 01H 02H 02H vvH F7H vv: Value (Note 1) Note 1: The setting value matches the value that is sent and received. Send Sent when the Chorus Depth parameter of System Chorus is - Casio WK3800 | Instruction Manual - Page 30
03H F7H Send This message is never sent. Receive Though this Model does not support GM2, receipt of the GM2 System On message has the same result as receipt parameters, as well as user data send/receive with Flash memory and come commands. For more information, see "Part IV This Model's System Exclusive Messages - Casio WK3800 | Instruction Manual - Page 31
MIDI Tune/Mix Sys Chorus Sys Reverb Master EQ DSP Part Basic Tune/Mix Tone Drawbar Vibrato Wave Data Information Song Data Information Rhythm Data Information SMF Data Information Parameter Set Bulk Transfer User Tone User Timbre User Drum User Instrument User Wave Parameter User - Casio WK3800 | Instruction Manual - Page 32
17.2.2 2...MAN : Manufacturer's ID Format: 01000100B CASIO Manufacturer's ID = 44H 17.2.3 3...MOD : Model use for the following models. CTK-691, WK-3000, WK-3100, WK-3500, CTK-900,WK-3200, WK-3700, WK-3300, WK-3800, WK- in a received message are compared with the Model's MIDI Device ID, and receipt - Casio WK3800 | Instruction Manual - Page 33
17.2.5 5...act : Action Format: 00000aaaB aaaB = Action (3bit) This field indicates the operation of the System Exclusive Message. aaaB Message Type 00H IPC Individual Parameter Change 01H IPR Individual Parameter Request 02H BDR Oneway Parameter Set Bulk Send 03H BDR Oneway Parameter Set Bulk - Casio WK3800 | Instruction Manual - Page 34
- - - A R 09H DSP A R - - A R 0AH Song Data A - - - A R 0BH Rhythm Pattern T - - - A R 0CH Registration - - - - A R 0DH Drawbar - (Note 1) - - (see "Part V Parameter List" below) individually (as opposed to bulk transfer), this field is used to identify - Casio WK3800 | Instruction Manual - Page 35
= 00000B; if 32 bits = 11111B) 02, 04 BDS, HDS data bit size - 1 = 01111B (Since transfer is in 16-bit data, this data length is always used.) 01, 03, 05, 07 IPR, BDR, HDR or Control 0 17.2.9 9....ps : Parameter Set Number Format: 0nnnnnnnB (LSB) 0mmmmmmmB (MSB) This field is a 2-byte (LSB, MSB - Casio WK3800 | Instruction Manual - Page 36
have the same IDs, for example, the parameters also have preset numbers, part numbers, and key numbers, and so the parameters can be distinguished by specifying it indicates the control messages used for handshaking as shown below. See "19 Parameter Set Transfer Protocols" for more information. - Casio WK3800 | Instruction Manual - Page 37
ccccB 0000B 0001B 0010B 0011B 0100B 0101B : 1111B Control Message EOD Oneway/Handshake Bulk Dump End of Data (Parameter set transfer complete) HDA Handshake Bulk Dump Acknowledge (Handshake receive successful) HDJ Handshake Bulk Dump Reject (Handshake rejected/stopped) HDE Handshake Bulk Dump Error - Casio WK3800 | Instruction Manual - Page 38
LSB: abccccccB cdddddddB ↓ data0: 0dddddddB data1: 0cccccccB data2: 000000abB Note, however, that a parameter set of 128 bytes or less can be sent using a single packet, and anything greater than 128 bytes is divided among multiple packets. This means that the maximum length "data" field is 128 - Casio WK3800 | Instruction Manual - Page 39
some command to this Model, and the Individual Parameter Request can be used to check this Model's status information. Data Receiver Data Sender IPR → ← IPC Operation Send Request (Optional) Data Transfer See "Part V Parameter List" for information about what kinds of parameters are actually - Casio WK3800 | Instruction Manual - Page 40
is broken down into multiple packets when a single Parameter Set is larger than a certain size. The Packet Number in the packet's index field is used to indicate the sequential position of a packet relative to the other packets. Even if Parameter Sets are small, they cannot be grouped together and - Casio WK3800 | Instruction Manual - Page 41
19.3 Handshake Protocol Communication Flow A session starts with the receiving device sending a request using an HDR or with the sending device sending HDS data. The sending device does not send the next packet until it receives an ACK from - Casio WK3800 | Instruction Manual - Page 42
device that sends BDS, BDR, HDS, HDR. When the BSY is received, the receiver must wait until this Model enters a session-enabled mode, or use a Prepare for Data Management parameter (see "20.2 Data Management Command List") to change to a communication-enabled mode. Data Receiver Data Sender BDR - Casio WK3800 | Instruction Manual - Page 43
Data Receiver Data Sender BDS → ← BSY (Send Canceled) Operation Data Send Busy Data Receiver Data Sender HDR → ← BSY (Send Canceled) Operation Send Request Busy Data Receiver Data Sender HDS → ← BSY (Send Canceled) Operation Data Send Busy The same packet is resent when a checksum - Casio WK3800 | Instruction Manual - Page 44
Part V Parameter Lists These lists show the parameters that can be transferred individually using System Exclusive Messages. • Note 1: Any parameter that has "r" to the right of its Parameter ID number is a read-only parameter that can be used for obtaining status information only. A parameter with - Casio WK3800 | Instruction Manual - Page 45
0008 = reserved 0009 = WK-3300 000A = WK-3800 000B = WK-8000 000C = PX-410R/ PX-575R 0 Bit0...Part1 Bit1...Part2 : Bit15...Part16 0...Nop 1...DSP cancel Note 1: This is the version number of models with the same System Exclusive Model ID = 11-02. This value is used to specify the model - Casio WK3800 | Instruction Manual - Page 46
0 00 20 Wave/Rhythm (Note 3) 23w Delete Song 0 0 10 24w Delete Rhythm 0 0 10 25w Part (Tone, Drawbar) Parameter Set Category Destination Parameter Set Number See "40 About Parameter Set (PS) Numbers" for details about user parameter set numbers. Note 5: The initialization target - Casio WK3800 | Instruction Manual - Page 47
dlen 0 / bit size - 1 09 ps LSB,MSB = 00,00 10 index Part 11 data See the Parameter List 12 sum None 13 EOX F7 Setup Parameter List 24 to 0 to +24 0000 00 02 0-3 0 0...Sustain 1...Sostenuto 2...Soft 3...Rhythm 0000 00 04 0-12 6 0 to 6 to 12 0000 00 01 0-1 0 0...Off 1...On 0000 - Casio WK3800 | Instruction Manual - Page 48
Parameter ps index bit 36 Keyboard MIDI Channel 0000 00 04 37 MIDI Chord judge 0000 00 01 38 Accomp MIDI Out 0000 00 01 39 the user area whenever data is written into any user data area. 21.1 Patch Common Parameter List This list shows setting parameters that are common for each part. - Casio WK3800 | Instruction Manual - Page 49
data sent from System Chorus to System Reverb. Note 5: When "DSP Bypass" is specified for "DSP Line Bypass," the DSP Line Select settings of all parts are cancelled, and all DSP lines are treated as if they are turned off. This means that notes that are currently sounding are not affected - Casio WK3800 | Instruction Manual - Page 50
System Chorus ParamID Parameter bit 10 Chorus Macro Num (Note 1) 05 11 Chorus Level 07 12 Chorus Rate 07 13 Chorus Depth 07 14 Chorus Feedback (Note 2) 07 15 Chorus Tone (Note 3) 07 Value 00-0F 00-7F 00-7F 00-7F 00-7F 00-7F Default SettingValue(Decimal) 02 0-15 40 0-127 03 0-127 - Casio WK3800 | Instruction Manual - Page 51
01 2E DSP Level 07 2F DSP Pan (Note 2) 07 Value 00-C8 0-1 00-7F 00-7F Default SettingValue(Decimal) 0E 0- 99 Preset 100-199 User 200 DSP of Tone 0 0...Off 1...On 64 0-127 40 -64 to 0 to +63 Note 1: Selects the DSP Type. Receipt of GM/GS Reset selects 014 - Casio WK3800 | Instruction Manual - Page 52
, the number of parameter types depends on the DSP algorithm, which means that not all User Parameters and Internal Parameters are necessarily available as a particular DSP's parameters. See the "Part VII DSP Parameter List" for details about parameter types and contents. ParamID Parameter bit 38 - Casio WK3800 | Instruction Manual - Page 53
) 000 000-FFF 4 -2 to 0 to +2 Oct 1 0...Disable (Off) 1...Enable (On) 0 0...Normal 1...Rhythm 2...Drawbar Note 1: Number of the tone allocated to this part. Note 2: Sets the Normal, Drum and Drawbar Organ modes of the part play operation. For detailed operations, see "12.1 About the - Casio WK3800 | Instruction Manual - Page 54
wheel is operated. When Modulation Assign is any setting from DSP Parameter0 to DSP Parameter7, the DSP Parameter0 to DSP Parameter7 value and MIDI send value when the modulation button is operated is in accordance with the setting of this parameter. This setting does not affect modulation wheel - Casio WK3800 | Instruction Manual - Page 55
-64 to 0 to +63 00 0-127 00 0-127 Note 1: When Modulation Assign is any setting other than Vibrato, Vibrato depth is adjusted when a Modulation message (MIDI Control Change) is received. Note 2: This parameter adjusts the depth of the Vibrato effect when - Casio WK3800 | Instruction Manual - Page 56
22 Wave Data Parameters Wave Data Parameters contain address and size information about expanded waveform data. 22.1 Wave Data Information System Exclusive Format Field Value 01 SYSEX F0 02 MAN 44 03 MOD 11,02 04 dev Either 00 to 1F, or 7F 05 act 00(IPC), 01(IPR) 06 cat Wave Data = 08 - Casio WK3800 | Instruction Manual - Page 57
23 Song Data Parameter Song Data Parameters contain address, size, and name information about song sequencer data. 23.1 Song Data Information System Exclusive Format Field Value 01 SYSEX F0 02 MAN 44 03 MOD 11,02 04 dev Either 00 to 1F, or 7F 05 act 00(IPC), 01(IPR) 06 cat Song = 0A - Casio WK3800 | Instruction Manual - Page 58
SYSEX F0 02 MAN 44 03 MOD 11,02 04 dev Either 00 to 1F, or 7F 05 act 00(IPC), 01(IPR) 06 cat Rhythm = 0B 07 prm 00-7F 08 ilen/dlen 0 / bit size - 1 09 ps LSB,MSB = SMF Data number For details, see "40 About Parameter Set (PS - Casio WK3800 | Instruction Manual - Page 59
25 SMF Data Parameters SMF Data Parameters contain address, size, and name information about SMF data. 25.1 SMF Data Information System Exclusive Format Field Value 01 SYSEX F0 02 MAN 44 03 MOD 11,02 04 dev Either 00 to 1F, or 7F 05 act 00(IPC), 01(IPR) 06 cat SMF = 10 07 prm 00-7F - Casio WK3800 | Instruction Manual - Page 60
Part VI Parameter Set List This list shows the parameter sets that can be transferred using System Exclusive Message Bulk Dump. 26 User Tone sum See "IV This Model's System Exclusive Messages". 13 EOX F7 27 User Timbre Parameter Set This is the parameter set that is associated with and sent - Casio WK3800 | Instruction Manual - Page 61
"IV This Model's System Exclusive Messages". See "IV This Model's System Exclusive Messages". See "IV This Model's System Exclusive Messages". 13 EOX F7 29 User Voice Parameter Set This is the parameter set that is associated with and sent with Timbre. Four voices are associated with one timbre - Casio WK3800 | Instruction Manual - Page 62
30 User Instrument Parameter Set This is the parameter set that is associated with and sent with Drum. All key numbers are supported, so one 12 sum See "IV This Model's System Exclusive Messages". 13 EOX F7 31 User Wave Parameter Set This is the parameter set that is associated with and sent - Casio WK3800 | Instruction Manual - Page 63
32 User Wave Data This is the actual wave that is sent along with each See "IV This Model's System Exclusive Messages". See "IV This Model's System Exclusive Messages". 13 EOX F7 33 User DSP Parameter Set System Exclusive Format Field Value 01 SYSEX F0 02 MAN 44 03 MOD 11,02 04 dev 05 - Casio WK3800 | Instruction Manual - Page 64
's System Exclusive Messages". 11 data See "IV This Model's System Exclusive Messages". 12 sum See "IV This Model's System Exclusive Messages". 13 EOX F7 35 User Rhythm Pattern System Exclusive Format Field Value 01 SYSEX F0 02 MAN 44 03 MOD 04 dev 11,02 Either 00 to 1F, or 7F 05 - Casio WK3800 | Instruction Manual - Page 65
36 Registration Data System Exclusive Format Field Value 01 SYSEX F0 02 MAN 44 03 MOD 11,02 04 dev Either 00 to 1F, or 7F 05 act 04(HDS), 05(HDR), 07(Control) 06 cat Registration = 0C 07 prm 00 08 ilen/dlen See "IV This Model's System Exclusive Messages". 09 ps Indicates the - Casio WK3800 | Instruction Manual - Page 66
37 User Drawbar Parameter Set System Exclusive Format Field Value 01 SYSEX F0 02 MAN 44 03 MOD 11,02 04 dev Either 00 to 1F, or - Casio WK3800 | Instruction Manual - Page 67
SMF Data 39 Flash Memory Image Parameter Set This Parameter Set is used for dumping flash memory contents. One Parameter Set corresponds to an image of this Model is made up of two blocks, so two Parameter Sets are used. System Exclusive Format Field Value 01 SYSEX F0 02 MAN 44 03 MOD 04 - Casio WK3800 | Instruction Manual - Page 68
numbers When using a system exclusive message to transfer a user Parameter Sets or user Parameter Set WK-3300/WK-3800/WK-8000 PS Category User PS Header (Decimal) Tone 967 Tone with wave 1067 Timbre 590 Drum 22 Voice 1070 Instrument 330 Wave Parameter 1080 Wave Data 1080 Rhythm - Casio WK3800 | Instruction Manual - Page 69
Part VII DSP Parameter List This list shows the parameters for each of the DSP algorithms. U0 to U7 indicate User Parameters 0 to 7, while : LFO Wah Number U0 U1 U2 U3 U4 Parameter Input Level Resonance Manual LFO Rate LFO Depth Notes - 41.6 Algorithm 05 (05H) : Auto Wah Number - Casio WK3800 | Instruction Manual - Page 70
Distortion Number U0 U1 U2 U3 Parameter Gain Low High Level Notes - 41.10 Algorithm09(09H):StereoPhaser Number U0 U1 U2 U3 U4 Parameter Resonance Manual Note 1 Rate Depth Wet Level Notes - Note 1:See the "43.5 -64 to 0 to 63 Setting Value Table." 41.12 Algorithm 11 (0BH) : Rotary Number U0 - Casio WK3800 | Instruction Manual - Page 71
41.15 Algorithm 14 (0EH) : Ring Modulator Number U0 U1 U2 U3 U4 Parameter OSC Frequency LFO Rate LFO Depth Wet Level Dry Level Notes - 41.19 Algorithm 18 (12H) : 3-Phase Chorus Number U0 U1 U2 U3 U4 Parameter Rate1 Depth1 Rate2 Depth2 Wet Level Notes - 41.16 Algorithm 15 (0FH) : LoFi Number - Casio WK3800 | Instruction Manual - Page 72
41.23 Algorithm 22 (16H) : 3-Tap Delay Number U0 U1 U2 U3 U4 U5 U6 Parameter Delay Time Wet Level Feedback High Damp Ratio L Ratio C Ratio R Notes - 41.24 Algorithm 23 (17H) : Gate Reverb Number U0 U1 U2 U3 U4 U5 U6 Parameter LPF HPF Feedback High-Damp Diffusion Wet Level Dry Level Notes - - Casio WK3800 | Instruction Manual - Page 73
Ratio C Delay Ratio R Notes - 42.3 Algorithm M02 (22H) : Multi02 Number U0 U1 U2 U3 U4 U5 U6 U7 I03 Parameter Phaser Resonance Phaser Manual Phaser Rate Phaser Depth Chorus Rate 1 Chorus Depth 1 Chorus Rate 2 Chorus Depth 2 Phaser Wet Level Notes - 42.4 Algorithm M03 (23H) : Multi03 Number U0 - Casio WK3800 | Instruction Manual - Page 74
42.5 Algorithm M04 (24H) : Multi04 Number U0 U1 U2 U3 U4 U5 U6 U7 I05 I06 I07 Parameter Phaser Resonance Phaser Manual Phaser Rate Phaser Depth Phaser Wet Level Delay Time Delay Wet Level Delay Feedback Delay High-Damp Delay Ratio L Delay Ratio R Notes - 42.6 Algorithm M05 ( - Casio WK3800 | Instruction Manual - Page 75
42.12 Algorithm M11 (2BH) : Multi11 Number U0 U1 U2 U3 U4 U5 U6 U7 I01 I02 I03 I04 Parameter Compressor Depth Compressor Attack Compressor Level Lo-Fi Noise 1 Lo-Fi Noise 2 Lo-Fi Tone Lo-Fi Resonance Lo-Fi Bass Compressor Release Lo-Fi Noi1 Density Lo-Fi Noi2 Density Lo-Fi Level Notes - 42.13 - Casio WK3800 | Instruction Manual - Page 76
-Damp Delay Ratio L Delay Ratio R Notes - 42.21 Algorithm M20 (34H) : Multi20 Number U0 U1 U2 U3 U4 U5 U6 U7 Parameter Phaser Resonance Phaser Manual Phaser Rate Phaser Depth Chorus LFO Rate Chorus LFO Depth Auto Pan Rate Auto Pan Depth Notes - 76 - Casio WK3800 | Instruction Manual - Page 77
U2 U3 U4 U5 U6 U7 I10 I11 I12 Parameter Wah Resonance Wah Manual Wah Depth Chorus LFO Rate Chorus LFO Depth Delay Delay Time Delay Wet Number U0 U1 U2 U3 U4 U5 U6 U7 I09 I10 I11 Parameter Wah Resonance Wah Manual Wah LFO Rate Wah LFO Depth Chorus LFO Depth Delay Time Delay Wet Level Delay Feedback - Casio WK3800 | Instruction Manual - Page 78
(3DH) : Multi29 Number U0 U1 U2 U3 U4 U5 U6 U7 I12 I15 Parameter Distortion Gain Distortion Low Distortion Tone Distortion Level Phaser Resonance Phaser Manual Phaser Rate Phaser Depth Phaser Input Level Phaser Wet Level Notes - 42.31 Algorithm M30 (3EH) : Multi30 Number U0 U1 U2 U3 U4 U5 U6 - Casio WK3800 | Instruction Manual - Page 79
42.32 Algorithm M31 (3FH) : Multi31 Number U0 U1 U2 U3 U4 U5 U6 U7 Parameter Distortion Gain Distortion Low Distortion Tone Distortion Level Flanger LFO Rate Flanger LFO Depth Flanger Feedback Flanger Wet Level Notes - 79 - Casio WK3800 | Instruction Manual - Page 80
Part VIII Setting Values and Send/ Receive Values 43 Setting Value Table 43.1 Value Off On Off/On Setting Value Table Transmit 00H 7FH Receive 00H- - Casio WK3800 | Instruction Manual - Page 81
43.10 Reverb Type Setting Value Table Value Room1 Room2 Room3 Hall1 Hall2 Plate1 Delay Panning Delay Plate2 Plate3 Large Room1 Large Room2 Stadium1 Stadium2 Long Delay Long Panning Delay Transmit/Receive 00H 01H 02H 03H 04H 05H 06H 07H 08H 09H 0AH 0BH 0CH 0DH 0EH 0FH 43.12 Equalizer Low Frequency - Casio WK3800 | Instruction Manual - Page 82
43.15 Equalizer Gain Setting Value Table Value -12 -11 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5 +6 +7 +8 +9 +10 +11 +12 Transmit 00H 05H 0AH 0FH 14H 19H 1EH 23H 28H 2DH 32H 37H 3CH 44H 49H 4EH 53H 58H 5DH 62H 67H 6CH 71H 76H 7BH Receive 00H-04H 05H-09H 0AH-0EH 0FH-13H 14H-18H 19H-1DH 1EH- - Casio WK3800 | Instruction Manual - Page 83
Part IX MIDI Implementation Notation 43.19 Hexadecimal Notation MIDI implementation sometimes requires A through F. The following table shows the hexadecimal equivalents for the most commonly used values (0 to 127). Decimal Hexadecimal Decimal Hexadecimal Decimal Hexadecimal Decimal Hexadecimal 0 - Casio WK3800 | Instruction Manual - Page 84
CASIO COMPUTER CO.,LTD. 6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan MA0608-A
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
 |
 |
1
Part
I
MIDI Message Overview
1
Product Configuration as a MIDI Device
..........................................................................................
7
1.1
Controller Block
...................................................................................................................................
7
1.2
Sound Source Block
............................................................................................................................
7
1.3
Sound Source Common Sub-blocks
...................................................................................................
8
1.4
Sound Source Instrument Part Sub-block
...........................................................................................
8
1.5
MIDI Send by Auto-accompaniment, Song Memory, and the SMF Player
..........................................
8
2
Conditions that Disable Message Send and Receive
......................................................................
8
3
Conditions that Disable Bulk Dump Message Send and Receive
...................................................
8
4
Different Operations Depending on Part Mode
................................................................................
9
Part
II
Channel Message
5
Receive Channel
.............................................................................................................................
9
6
Send Channel
..................................................................................................................................
9
7
Note Off
...........................................................................................................................................
9
8
Note On
.........................................................................................................................................
10
9
Polyphonic Key Pressure
...............................................................................................................
10
10
Control Change
..............................................................................................................................
10
10.1
Bank Select (00H)
.............................................................................................................................
11
10.2
Modulation (01H)
...............................................................................................................................
11
10.3
Data Entry (06H,26H)
........................................................................................................................
11
10.4
Volume (07H)
....................................................................................................................................
12
10.5
Pan (0AH)
..........................................................................................................................................
12
10.6
Expression (0BH)
..............................................................................................................................
12
10.7
General Use Controllers 1 through 8 (10H through 13H, 50H through 53H)
.....................................
13
10.8
Hold1 (40H)
.......................................................................................................................................
13
10.9
Sostenuto (42H)
................................................................................................................................
14
10.10
Soft (43H)
..........................................................................................................................................
14
10.11
Envelope Release Time (48H)
..........................................................................................................
14
10.12
Envelope Attack Time (49H)
..............................................................................................................
15
10.13
Filter Cutoff (4AH)
..............................................................................................................................
15
10.14
Filter Resonance (47H)
.....................................................................................................................
15
10.15
Vibrato Rate (4CH)
............................................................................................................................
16
MIDI Implementation for the WK-3300, WK-3800, WK-8000, PX-410R and PX-575R
Important
!
• All mentions of "this Model" in this document refer to the CASIO WK-3300, WK-3800, WK-8000, PX-410R
and PX-575R.
Contents