Casio XJ-M140 User Manual - Page 41

Indicator/Error Message Description and Required Action POWER LIGHT TEMP Message : Green steady :- :- : A system problem has occurred. Normal projection is not possible. A system problem has occurred, which may cause problems with some functions. Turn off the projector, disconnect the power cord from the projector and wait for all of the projector's indicators to go out. Next, reconnect the power cord and turn the projector back on. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. Press the [ESC] key to clear the warning message. POWER : Green steady LIGHT : - TEMP : - Message : There is some problem with the system. The audio function may not operate correctly. POWER : Green steady LIGHT : - TEMP : - Message : Some problem occurred with the USB port or LAN terminal. POWER : Amber flashing J Red steady LIGHT : - TEMP : Red steady Message : - POWER LIGHT TEMP : Amber flashing J Red steady : Red flashing (0.5-second interval) : Red flashing (0.5-second interval) The USB or LAN connection was terminated because of a problem with the USB port or LAN port. To use the USB or LAN function, turn off the projector and then turn it back on again. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. Press the [ESC] key to clear the warning message. The projector was turned off automatically due to some problem that was probably caused by external digital noise or some other reason. Confirm that the POWER/STANDBY indicator is lit red (without flashing). After checking the POWER/STANDBY indicator, disconnect the power cord from the projector and wait for all of the projector's indicators to go out. Next, reconnect the power cord and turn projector power back on. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. The projector was turned off automatically because the light source unit turned off or did not turn on. After confirming that the POWER/STANDBY indicator is lit red (without flashing), unplug the power cord. Wait for a short while and then plug it back in and turn on the projector again. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. Message : - POWER : Amber flashing J Red steady LIGHT : Not lit or red flashing TEMP : Red flashing (2-second interval) Message : - Power has turned off automatically due to a projector memory error. Confirm that the POWER/STANDBY indicator is lit red (without flashing). After checking the POWER/STANDBY indicator, disconnect the power cord from the projector and wait for all of the projector's indicators to go out. Next, reconnect the power cord and turn projector power back on. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. 41