Casio XJ-M140 Setup Guide - Page 5
Lens cover - similar projectors
View all Casio XJ-M140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Safety Precautions ● Disposal by burning - Never try to dispose of the projector by burning it. Doing so can cause an explosion, which creates the risk of fire and personal injury. ● Looking into the lens or vents while light source unit is on - Never look directly into the lens or vents while light source unit is on. The strong light emitted by the projector creates the risk of eye damage. ● Blocking the vents - Never allow the vents to become blocked. Doing so causes internal heat build up, which creates the risk of fire and breakdown of the projector. Touching the projector while it is hot creates the risk of burn injury. Make sure that you always observe the following precautions. • Allow at least 30cm (11.8 inches) between the projector and walls. • Do not insert the projector into any space where air circulation is poor. • Never cover the projector with a blanket or any similar item. • Locate the projector on a firm, flat surface during use. Never use the projector while it is on a carpet, blanket, towel, seat cushion, or other pliable surface. • Never stand the projector up on either end during use. ● Projector cabinet ' Never open the projector's cabinet. Doing so creates the risk of electric shock. ● Cleaning $ Before cleaning the projector, be sure to turn it off and unplug it from the power outlet. Failure to do so creates the risk of electric shock. ● Exhaust vents The exhaust vents become very hot while the projector is running. Never touch them. Doing so creates the risk of burn injury. The areas near the exhaust vents also become quite hot. Never locate objects made of plastic or other heat-sensitive materials near or under the projector. Doing so creates the risk of deformation and discoloration of the object. ● Lens cover Be sure to remove the lens cover before turning on the projector. Never leave the lens cover attached while the projector is in use. ● Location Never locate the projector in any of the following types of locations. Doing so creates the risk of fire and electric shock. • Near an area subject to strong vibration • An area subject to large amounts of moisture or dust • In a kitchen or other area exposed to oil smoke • Near a heater, on a heated carpet, or in an area exposed to direct sunlight • An area subject to temperature extremes (Operating temperature range is 5°C to 35°C (41°F to 95°F)). ● Heavy objects Never place heavy objects on the projector or climb on top of the projector. Doing so creates the risk of fire and electric shock. ● Water Never locate the projector in a bathroom or anywhere else there is the chance that it will be splashed with water. ● Unstable location - Never place the projector on an unstable surface or on a high shelf. Doing so can cause it to fall, creating the risk of personal injury. E-3