Cisco 1760V Router Guide - Page 68

Cisco Interface Cards T1, E1, AND G.703 MULTIFLEX TRUNK VOICE AND WAN INTERFACE CARDS Product VWIC-2MFT-G703 2-port RJ-48 multiflex trunk-E1 framed/unframed voice/WIC with drop and insert Description This module supports voice, data, and integrated voice/data applications. For data applications, the VWIC provides a two-port WIC for E1/FE1 or unframed G.703 with an integrated DSU. For a packet voice solution, the VWIC provides a two-port voice interface card (VIC) with integrated DSU, that combines with the digital T1/E1 packet voice trunk modules. For multiplexed voice and data applications, this module provides a two-port VWIC E1/FE1 drop and insert multiplexer. Modular Router Solutions Serial and Legacy Concentration Voice and Fax Integration Supported Platforms and Minimum Cisco IOS Versions 3800 Series - 12.3(11)T 3700 Series - 12.2(8)T 3660 Series - 12.1(1)T 3640 - 12.1(1)T 3620 - 12.1(1)T 2800 Series - 12.3(8)T4 2691 - 12.2(8)T1 2600XM Series - 12.2(12) Mainline, 12.2(8)T1 2650 Series - 12.1(3)T 2620 Series - 12.1(1)T 2610 Series - 12.1(1)T 1841 - 12.3(8)T4 1760 - 12.2(15)T or later T trains; 12.3 Mainline 1751 - 12.2(15)T or later T trains; 12.3 Mainline 1721 - 12.2(15)T or later T trains; 12.3 Mainline Comments When used in a Cisco 3600 Series Router, requires one of the following network modules: NM-2W, NM-1FE2W, NM-2FE2W, NM-1FE1R2W or NM-HDV. Minimum Cisco IOS version may vary depending on application. Voice Interface Cards ANALOG VOICE INTERFACE CARDS Product VIC-2FXS 2-port FXS voice interface card Description The two-port FXS voice/ fax interface card for Cisco voice/fax network modules is used to connect directly to phones and fax machines. This voice interface card works with existing phone and fax equipment to provide voice and fax services over IP, and is compatible with H.323 standard for audioand videoconferencing. Modular Router Solutions Voice and Fax Integration Supported Platforms and Minimum IOS Versions 3700 Series - 12.2(8)T 3660 Series - 12.0(5)T 3640 - 11.3(1)T 3620 - 11.3(1)T 2691 - 12.2(8)T1 2600XM Series - 12.1(14) Mainline, 12.2(12) Mainline, 12.2(8)T1 2650 Series - 12.1(3)T 2620 Series - 11.3(1)T 2610 Series - 11.3(1)T 1760 - 12.2(11)T; 12.3 Mainline 1751 - 12.2(4)T; 12.3 Mainline Comments When used in a Cisco 2600, 3600 or 3700 Series Router, requires a voice/ fax network module: NM-1V or NM-2V. When used in a Cisco 1751 or Cisco 1760 Series Router, requires a DSP module. Prior to Cisco IOS 12.3 Mainline, requires a Cisco IOS "Plus" feature set. 12.3 Mainline and forward supported in "IP Voice" feature set. 132 Cisco Interface Cards ANALOG VOICE INTERFACE CARDS Product VIC-2FXO 2-port FXO voice interface card Description The two-port FXO voice/fax interface card for Cisco voice/fax network modules is used to connect to PBX or key systems, and to provide off-premise connections. This voice interface card works with existing phone and fax equipment to provide voice and fax services over IP, and is compatible with H.323 standard for audioand videoconferencing. Modular Router Solutions Voice and Fax Integration Supported Platforms and Minimum Cisco IOS Versions 3700 Series - 12.2(8)T 3660 Series - 12.0(5)T 3640 - 11.3(1)T 3620 - 11.3(1)T 2691 - 12.2(8)T1 2600XM Series - 12.1(14) Mainline, 12.2(12) Mainline, 12.2(8)T1 2650 Series - 12.1(3)T 2620 Series - 11.3(2)XA 2610 Series - 11.3(2)XA 1760 - 12.2(11)T; 12.3 Mainline 1751 - 12.2(4)T; 12.3 Mainline Comments When used in a Cisco 2600, 3600 or 3700 Series Router, requires a voice/ fax network module: NM-1V or NM-2V. When used in a Cisco 1751 or Cisco 1760 Series Router, requires a DSP module. Prior to Cisco IOS 12.3 Mainline, requires a Cisco IOS "Plus" feature set. 12.3 Mainline and forward supported in "IP Voice" feature set. VIC-2FXO-EU 2-port FXO voice interface card for Europe The two-port FXO voice/fax interface card for Cisco voice/fax network modules is used to connect to PBX or key system, and to provide off-premise connections for Europe only. This voice interface card works with existing phone and fax equipment to provide voice and fax services over IP, and is compatible with H.323 standard for audio- and videoconferencing. Modular Router Solutions Voice and Fax Integration 3700 Series - 12.2(8)T 3660 Series - 12.0(5)T 3640 - 11.3(6)T 3620 - 11.3(6)T 2691 - 12.2(8)T1 2600XM Series - 12.1(14) Mainline, 12.2(12) Mainline, 12.2(8)T1 2650 Series - 12.1(3)T 2620 Series - 11.3(6)T 2610 Series - 11.3(6)T 1760 - 12.2(11)T; 12.3 Mainline 1751 - 12.2(4)T; 12.3 Mainline When used in a Cisco 2600, 3600 or 3700 Series Router, requires a voice/ fax network module: NM-1V or NM-2V. When used in a Cisco 1751 or Cisco 1760 Series Router, requires a DSP module. Prior to Cisco IOS 12.3 Mainline, requires a Cisco IOS "Plus" feature set. 12.3 Mainline and forward supported in "IP Voice" feature set. VIC-2FXO-M1 2-port FXO voice interface card with battery reversal and caller ID support The two-port FXO voice/fax interface card for Cisco voice/fax network modules is used to connect to PBX or key system, and to provide off-premise connections. This voice interface card supports all features of VIC-2FXO and in addition battery reversal, power denial, and caller ID. Modular Router Solutions Voice and Fax Integration 3700 Series - 12.2(8)T 3660 Series - 12.1(2)XH 3640 - 12.1(2)XH 3620 - 12.1(2)XH 2691 - 12.2(8)T1 2600XM Series - 12.1(14) Mainline, 12.2(12) Mainline, 12.2(8)T1 2650 Series - 12.1(3)T 2620 Series - 12.1(2)XH 2610 Series - 12.1(2)XH 1760 - 12.2(11)T; 12.3 Mainline 1751 - 12.2(13)T; 12.3 Mainline When used in a Cisco 2600, 3600 or 3700 Series Router, requires a voice/ fax network module: NM-1V or NM-2V. When used in a Cisco 1751 or Cisco 1760 Series Router, requires a DSP module. Prior to Cisco IOS 12.3 Mainline, requires a Cisco IOS "Plus" feature set. 12.3 Mainline and forward supported in "IP Voice" feature set. 133