Cisco AIR-AP1131AG-N-K9 Hardware Installation Guide

Cisco AIR-AP1131AG-N-K9 Manual

Cisco AIR-AP1131AG-N-K9 manual content summary:

  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 1
    Cisco Aironet 1100 Series Access Point Hardware Installation Guide December 2006 Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 Text Part Number: OL-4309-07
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 2
    display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental. Cisco Aironet 1100 Series Access Point Hardware Installation Guide © 2006 Cisco Systems, Inc. All rights reserved.
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 3
    1-1 Hardware Features 1-3 Single Radio Operation 1-3 Ethernet Port 1-3 LEDs 1-4 Power Sources 1-4 UL 2043 Certification 1-5 Anti-Theft Features 1-5 Network Examples with Autonomous Access Points 1-5 Root Unit on a Wired LAN 1-6 Cisco Aironet 1100 Series Access Point Hardware Installation Guide iii
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 4
    3-9 Using the Cable Lock Feature 3-11 4 C H A P T E R 2.4-GHz Radio Upgrade for Autonomous Access Points 4-1 Upgrade Overview 4-2 Unpacking the Radio 4-2 Removing the Back Cover 4-3 Removing a 2.4-GHz Radio 4-4 Cisco Aironet 1100 Series Access Point Hardware Installation Guide iv OL-4309-07
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 5
    T E R Installing a 2.4-GHz Radio 4-5 Replacing the Back Cover 4-8 Finding the Software Version 4-9 Troubleshooting Autonomous Access Points 5-1 Checking the Autonomous Access Point LEDs 5-2 Checking Basic Settings 5-4 Default IP Address Behavior 5-4 Default SSID and Radio Behavior 5-4 Enabling the
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 6
    DHCP Option 43 for Lightweight Access Points F-1 Overview F-2 Configuring Option 43 for 1000 Series Access Points F-3 Configuring Option 43 for 1100, 1130, 1200, 1240, and 1300 Series Access Points F-4 GLOSSARY INDEX Cisco Aironet 1100 Series Access Point Hardware Installation Guide vi OL-4309-07
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 7
    who installs and manages the Cisco Aironet 1100 Series Access Point. The 1100 series access point is available in autonomous and lightweight configurations. To use this guide with autonomous access points, you should have experience working with Cisco IOS software and be familiar with the
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 8
    , and timesavers use these conventions and symbols: Tip Means the following will help you solve a problem. The tips information might not be troubleshooting or even an action, but could be useful information. Cisco Aironet 1100 Series Access Point Hardware Installation Guide viii OL-4309-07
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 9
    note. Notes contain helpful suggestions or references to materials not contained in this manual. Caution Means reader be careful. In this situation, you might do something (Traduzione delle avvertenze di sicurezza). OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide ix
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 10
    IOS Software Configuration Guide for Cisco Aironet Access Points These documents provide information about the lightweight access point and the controller: • Release Notes for Cisco Aironet 1100 Series Access Points • Cisco IOS Software Configuration Guide for Cisco Aironet Access Points Click
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 11
    at this URL: http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html From this site, you will find information about how to do the following: • Report security vulnerabilities in Cisco products OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide xi
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 12
    Alerts and Cisco Field Notices. You can receive these announcements by using the Product Alert Tool on Cisco.com. This tool enables you to create a profile and choose those products for which you want to receive information. Cisco Aironet 1100 Series Access Point Hardware Installation Guide xii OL
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 13
    output. Search results show an illustration of your product with the serial number label location highlighted. Locate the serial number label on your product and record the information before placing a service call. OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide xiii
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 14
    access point serial number label contains the following information: • Model number, such as AIR-AP1100 or AIR-LAP1100 • Serial number, such as S/N: VDF0636XXXX (11 requesting support from the Cisco Technical Assistance Center. Cisco Aironet 1100 Series Access Point Hardware Installation Guide xiv
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 15
    and other communications. Create a profile and then select the subscriptions that you would like to receive. To visit the Cisco Online Subscription Center, go to this URL: http://www.cisco.com/offer/subscribe OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide xv
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 16
    URL: http://www.cisco.com/univercd/cc/td/doc/abtunicd/136957.htm • World-class networking training is available from Cisco. You can view current offerings at this URL: http://www.cisco.com/en/US/learning/index.html Cisco Aironet 1100 Series Access Point Hardware Installation Guide xvi OL-4309-07
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 17
    to operate as an access point. • The term bridge describes the product when configured to operate as a bridge. Autonomous Access Points The autonomous access point (models: AIR-AP1120B or AIR-AP1121G) (model: AIR-AP1252) supports a management system based on Cisco IOS software. The 1100 series is
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 18
    . In the Cisco Centralized Wireless LAN architecture, access points operate in the lightweight mode (as opposed to autonomous mode). The lightweight access points associate to a controller. The controller manages the configuration, firmware, and controls transactions such as 802.1x authentication
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 19
    -T Ethernet LAN. The access point can receive power through the Ethernet cable from a power injector, switch, or power patch panel. The Ethernet MAC address is printed on the label on the back of the access point. OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide 1-3
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 20
    do not need to run a separate power cord to the access point. The access point supports the following power sources: • Power supply (input 100-240 VAC, 50-60 Hz, output 48 VDC, 0.2A minimum) • Inline power from: - Cisco Aironet Power Injector (Cisco AIR-PWRINJ3= or Cisco AIR-PWRINJ-FIB= ) - A switch
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 21
    wireless network configurations. The autonomous access point's default configuration is as a root unit connected to a wired LAN or as the central unit in an all-wireless network. The repeater role requires a specific configuration. The autonomous 1100 series access point supports these operating
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 22
    roaming process is seamless and transparent to the user. Figure 1-3 shows access points acting as root units on a wired LAN. Figure 1-3 Access Points as Root Units on a Wired LAN Access point Access point 135445 Cisco Aironet 1100 Series Access Point Hardware Installation Guide 1-6 OL-4309-07
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 23
    the best performance for the client. Figure 1-4 shows an autonomous access point acting as a repeater. Consult the Cisco IOS Software Configuration Guide for Cisco Aironet Access Points for instructions on setting up an access point as a repeater. Note Non-Cisco client devices might have difficulty
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 24
    . This configuration allows the Ethernet-enabled devices to pass Ethernet traffic to and from the main LAN using the workgroup bridge. Figure 1-6 Workgroup Bridge Configuration 1 Access point Workgroup bridge 135448 Cisco Aironet 1100 Series Access Point Hardware Installation Guide 1-8 OL
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 25
    scalable and recommended by Cisco. Figure 1-8 illustrates a typical Layer 3 network configuration containing lightweight access points. Figure 1-8 Typical Layer 3 Network Configuration Example LWAPP OL-4309-07 LWAPP Cisco Aironet 1100 Series Access Point Hardware Installation Guide 1-9 158085
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 26
    Network Example with Lightweight Access Points Chapter 1 Overview 1-10 Cisco Aironet 1100 Series Access Point Hardware Installation Guide OL-4309-07
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 27
    Guidelines, page 2-3 • Controller Discovery Process for Lightweight Access Points, page 2-5 • Deploying the Access Points on the Wireless Network, page 2-5 • Connecting the Ethernet and Power Cables, page 2-7 OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide 2-1
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 28
    to its power source. Statement 1004 Warning This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: 20 A.. Statement 1005 Cisco Aironet 1100 Series Access Point Hardware Installation Guide 2-2 OL
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 29
    frequency as the access point and can cause signal interference. • Do not mount the access point outside of buildings. • Do not mount the access points on building perimeter walls unless outside coverage is desired. OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide 2-3
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 30
    . • The status LED signals operational status. • The radio LED signals wireless traffic over the radio interface. Figure 2-2 shows the three status LEDs. Figure 2-2 Access Point LEDs Ethernet Status Radio 81597 Cisco Aironet 1100 Series Access Point Hardware Installation Guide 2-4 OL-4309-07
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 31
    to provide controller IP addresses to the access points. Cisco switches support a DHCP server option. For additional information, refer to the "Configuring DHCP Option 43 for Lightweight Access Points" section on page F-1. • DNS server discovery-The access point uses the name CISCO-LWAPP-CONTROLLER
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 32
    access points, after your access points are deployed, ensure that your controller is not configured as a master controller. A master controller should only be used for configuring access points and not in a working network. Cisco Aironet 1100 Series Access Point Hardware Installation Guide
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 33
    Power Patch Panel • A power injector (Cisco AIR-PWRINJ3= or Cisco AIR-PWRINJ-FIB= ) • A power module (Universal power supply) 81173 81596 Note If you use in-line power from a switch or patch panel, do not connect the power module to the access point. Using two power sources on the access point
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 34
    placed in a building's environmental air space, such as above suspended ceilings. Note If you use a power injector to power the access point, you must use the power supply included with your access point and the Cisco Aironet Power Injector specified for the access point. Connecting to an Ethernet
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 35
    signifying that Cisco IOS is operational. Refer to the "Checking the Autonomous Access Point LEDs" section on page 5-2 or the "Checking the Lightweight Access Point LEDs" section on page 6-3 for LED descriptions. OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide 2-9
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 36
    Connecting the Ethernet and Power Cables Chapter 2 Installing the Access Point 2-10 Cisco Aironet 1100 Series Access Point Hardware Installation Guide OL-4309-07
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 37
    CH A P T E R 3 This appendix contains mounting instructions for the access point and contains the following topics: • Overview, page 3-2 • Mounting on Holster, page 3-9 • Using the Cable Lock Feature, page 3-11 OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide 3-1
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 38
    Only the fiber-optic power injector (AIR-PWRINJ-FIB) has been tested to UL 2043 for operation in a building's environmental air space; no other power injectors or power modules have been tested Yes No No Yes Yes Cisco Aironet 1100 Series Access Point Hardware Installation Guide 3-2 OL-4309-07
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 39
    Instructions of the bracket to mount it using the supplied #8 fasteners. Drill one of the following access point with the mounting rail on the mounting bracket and slide down the mounting rails until it clicks into place. OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 40
    on a Suspended Ceiling Chapter 3 Mounting Instructions Mounting on a Suspended Ceiling Follow these steps to mount your access point on a suspended ceiling. It may be to tighten the Keps nuts. Do not overtighten. Cisco Aironet 1100 Series Access Point Hardware Installation Guide 3-4 OL-4309-07
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 41
    on the access point with the mounting rail on the wall or ceiling mounting bracket and slide it down the mounting rails until it clicks into place. See Figure 3-3. Figure 3-3 Access Point Mounting Slots 81224 OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide 3-5
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 42
    3-5 shows the access point mounting bracket mounted perpendicular to the T-bar box hanger. You can also mount the bracket parallel to the T-bar box hanger. Step 3 Remove a ceiling tile adjacent to the mounting location. Cisco Aironet 1100 Series Access Point Hardware Installation Guide 3-6 OL
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 43
    1 Step 2 Connect the Ethernet cable and power jack. Insert the T-shaped tab on the security hasp adapter into the Kensington lock slot on the access point. See Figure 3-6. Figure 3-6 Security Hasp Adapter 81177 OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide 3-7
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 44
    Chapter 3 Mounting Instructions Step 3 Step power cables. Line up the mounting slots on the access point with the mounting rails on the cubical partition mounting bracket and slide it down the rails until it clicks into place. Cisco Aironet 1100 Series Access Point Hardware Installation Guide
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 45
    location to place the holster. Connect the Ethernet and power cables. • If you are going to secure the access point with a Kensington lock, attach it now. Position the holster so that its back side is facing you. OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide 3-9
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 46
    Instructions Step 4 Insert the access point into the holster while guiding the cables so that they do not interfere with the sides of the holster. You will hear a click when the access point locks into place. See Figure 3-9. Figure 3-9 Desktop Holster 81173 76406 3-10 Cisco Aironet 1100
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 47
    slot on the access point. Rotate the key right or left to secure the lock to the access point. Remove the key. A properly secured lock and cable look similar to Figure 3-10. Figure 3-10 Kensington Lock 81175 OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide 3-11
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 48
    Using the Cable Lock Feature Chapter 3 Mounting Instructions 3-12 Cisco Aironet 1100 Series Access Point Hardware Installation Guide OL-4309-07
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 49
    Access Points This chapter provides upgrade instructions for the autonomous access point 2.4-GHz (IEEE 802.11b-compliant or IEEE 802. 4-5 • Replacing the Back Cover, page 4-8 • Finding the Software Version, page 4-9 OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 50
    the Cisco IOS Software Configuration Guide for Cisco Aironet Access Pointsfor complete instructions on configuring the new radio. Unpacking the Radio Each 2.4-GHz (IEEE 802.11g) radio is shipped with the following items: • Quick Start Guide • A product registration card • A 1100 series access point
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 51
    To remove the access point's back cover, follow these steps: Step 1 Step 2 Step 3 Step 4 Step 5 Remove all cables and power connections from the access point. Remove all static "Removing a 2.4-GHz Radio" section. OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide 4-3
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 52
    disconnect the antenna wires. Note If the radio card does not spring up, slightly loosen the support bracket screws. Step 4 Remove the 2.4-GHz radio card from the mini-PCI connector: a. from the mini-PCI connector. Cisco Aironet 1100 Series Access Point Hardware Installation Guide 4-4 OL-4309-07
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 53
    1 Step 2 Carefully remove the new Cisco Aironet 2.4-GHz radio card from its anti-static bag. Grasp the radio card only on the edges, being careful not to touch components on the board or the gold connector pins. OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide 4-5
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 54
    hand and carefully push the radio card down with your other hand (towards the access point's motherboard) until the card-retaining clips lock into the notches on the side of the radio card (you will hear a click). Cisco Aironet 1100 Series Access Point Hardware Installation Guide 4-6 OL-4309-07
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 55
    connectors to touch while power is applied, or the radio can be damaged. If they are touching, carefully rotate them in opposite directions until they are separated. Go to the "Replacing the Back Cover" section on page 4-8. OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 56
    1100 series access point product compliance label and carefully place the new label over the existing label (see Figure 4-7). Figure 4-7 Location of Compliance Labels 1 2 95756 1 Product compliance label 2 Back cover Cisco Aironet 1100 Series Access Point Hardware Installation Guide 4-8 OL
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 57
    , refer to the Cisco IOS Software Configuration Guide for Cisco Aironet Access Points. Finding the Software Version To find the version of operating system software running on your autonomous access point, refer to the Cisco IOS Software Configuration Guide for Cisco Aironet Access Points. OL-4309
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 58
    Finding the Software Version Chapter 4 2.4-GHz Radio Upgrade for Autonomous Access Points 4-10 Cisco Aironet 1100 Series Access Point Hardware Installation Guide OL-4309-07
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 59
    Link Test, page 5-7 • Resetting to the Default Configuration, page 5-7 • Reloading the Access Point Image, page 5-9 • Obtaining the Access Point Image File, page 5-11 • Obtaining the TFTP Server Software, page 5-11 OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide 5-1
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 60
    LED blinks green to indicate radio traffic activity. The light is normally off, but it blinks green whenever a packet is received or transmitted over the access point's radio. Cisco Aironet 1100 Series Access Point Hardware Installation Guide 5-2 OL-4309-07
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 61
    /receive Ethernet errors. - General warning. - Resetting the configuration options to factory defaults. Red Firmware failure; try disconnecting and reconnecting unit power. - Loading new firmware image. OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide 5-3
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 62
    associations from other devices. These changes to the default configuration improve the security of newly installed access points. Refer to the Cisco IOS Software Configuration Guide for Cisco Aironet Access Points for instructions on configuring the SSID and the "Enabling the Radio Interfaces
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 63
    . Refer to Cisco IOS Software Configuration Guide for Cisco Aironet Access Points for instructions on setting the access point's WEP keys. Security Settings Wireless clients attempting to authenticate with your access point must support the same security options configured in the access point, such
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 64
    web browser and enter the access point's IP address in the browser address line. Press Enter. An Enter Network Password window appears. Enter the administrator username and password. The default username is Cisco and the default password is Cisco. The username and password are case sensitive. Click
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 65
    the web-browser interface. Note The following steps reset all configuration settings to factory defaults, including passwords, WEP keys, the IP address, and the SSID. For additional information on access point default behavior, refer to the "Default IP Address Behavior" section on page 5-4 and the
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 66
    the button. After the access point reboots, you must reconfigure the access point by using the Web browser interface, the Telnet interface, or Cisco IOS commands. Note The access point is configured with the factory default values including the IP address (set to receive an IP address using DHCP
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 67
    If your access point experiences a firmware failure or a corrupt firmware image, indicated by three red LEDs, you must reload the image from a connected TFTP server. Note This process resets all configuration settings to factory defaults, including passwords, WEP keys, the access point IP address
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 68
    password. The default username is Cisco and the default password is Cisco. The username and password are case sensitive. The Summary Status page appears. Click the System Software tab and then click Software Upgrade. The HTTP Upgrade screen appears. Click the Browse button to locate the access point
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 69
    TFTP server software from several websites. Cisco recommends the shareware TFTP utility available at this URL: http://tftpd32.jounin.net Follow the instructions on the website for installing and using the utility. OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide 5-11
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 70
    Obtaining the TFTP Server Software Chapter 5 Troubleshooting Autonomous Access Points 5-12 Cisco Aironet 1100 Series Access Point Hardware Installation Guide OL-4309-07
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 71
    CH A P T E R 6 Troubleshooting Lightweight Access Points This chapter provides troubleshooting procedures for basic problems with the 1100 series lightweight access point. For the most up-to-date, detailed troubleshooting information, refer to the Cisco Technical Support and Documentation website
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 72
    series, and Airespace 4024 series wireless LAN controllers are not supported because they lack the memory required to support access points running Cisco IOS software. • The access points do not support Wireless Domain Services (WDS) and cannot communicate with WDS devices. However, the controller
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 73
    LED blinks green to indicate radio traffic activity. The light is normally off, but it blinks green whenever a packet is received or transmitted over the access point's radio. OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide 6-3
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 74
    configuration options to factory defaults. Failure Red Red Red Firmware failure; try disconnecting and reconnecting unit power. Firmware Upgrade Controller status - Red - Alternating green, red , and amber1 Loading new firmware image. Connecting to the controller. Note If the access point
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 75
    activated. Rename the access point image file in the TFTP server folder to c1100-k9w7-tar.default. Connect the PC to the access point using a Category 5 (CAT5) Ethernet cable. Disconnect power from the access point. OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide 6-5
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 76
    ://www.cisco.com/cisco/software/navigator.html Click Wireless LAN Access > Aironet Access Points > Cisco Aironet 1100 Series. Click Cisco Aironet 1100 Access Point. On the Enter Network Password window, enter your Cisco.com username and password and click OK. Click IOS. Choose the Cisco IOS release
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 77
    TFTP server software from several web sites. Cisco recommends the shareware TFTP utility available at this URL: http://tftpd32.jounin.net Follow the instructions on the website for installing and using the utility. OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide 6-7
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 78
    Obtaining the TFTP Server Software Chapter 6 Troubleshooting Lightweight Access Points Cisco Aironet 1100 Series Access Point Hardware Installation Guide 6-8 OL-4309-07
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 79
    .html Click Cisco Aironet 1100 Series listed under Access Points. Click Install and Upgrade Guides. Click Safety Warnings for Cisco Aironet 1000, 1100, 1130AG, 1200, and 1240AG Series Access Points. OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 80
    Appendix A Translated Safety Warnings Cisco Aironet 1100 Series Access Point Hardware Installation Guide A-2 OL-4309-07
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 81
    Bridges in Japan, page B-6 • Administrative Rules for Cisco Aironet Access Points in Taiwan, page B-7 • Operation of Cisco Aironet Access Points in Brazil, page B-8 • Declaration of Conformity Statements, page B-9 OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide B-1
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 82
    Access Point Models: AIR-AP1120B-A-K9 or AIR-AP1121G-A-K9 Lightweight Access Point Model: AIR-LAP1121G-A-K9 FCC Certification number: LDK 102042 (AIR-MPI350) or LDK 102048 (AIR-MP21G-A-K9) Manufacturer: Cisco . Cisco Aironet 1100 Series Access Point Hardware Installation Guide B-2 OL-4309-07
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 83
    equipment according to the instruction manual. Industry-Canada Canadian user to obtain a license for the system according to the Canadian regulations. For further information, contact your local Industry Canada office. OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 84
    Appendix B Declarations of Conformity and Regulatory Information European Community, Switzerland, Norway, Iceland, and Liechtenstein Declaration of Conformity with Regard to the R&TTE Directive 1999/5/EC Cisco Aironet 1100 Series Access Point Hardware Installation Guide B-4 OL-4309-07
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 85
    essential requirements and other relevant provisions of Directive 1999/5/EC. For the 1100 series access point, the following standards were applied: • Radio: EN 300.328-1, EN 300 contact Cisco Corporate Compliance. OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide B-5
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 86
    legal combinations of power levels and antennas, contact Cisco Corporate Compliance. Cisco Aironet access points and bridges in Japan. These guidelines are provided in both Japanese and English. Japanese Translation 03-5549-6500 Cisco Aironet 1100 Series Access Point Hardware Installation Guide
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 87
    Aironet Access Points in Taiwan This section provides administrative rules for operatingCisco Aironet access points inTaiwan. The rules are provided in both Chinese and English. All Access Points Chinese Translation OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 88
    Point Models AIR-AP1121G-A-K9 AIR-LAP1121G-A-K9 Regulatory Information Figure B-1 contains Brazil regulatory information for the AIR-AP1121G-A-K9 and AIR-LAP1121G-A-K9 the access points. Figure B-1 Brazil Regulatory Information Cisco Aironet 1100 Series Access Point Hardware Installation Guide
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 89
    .com Declaration of Conformity Statements for European Union Countries The Declaration of Conformity statements for the European Union countries are listed below: OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide B-9
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 90
    Declaration of Conformity Statements Appendix B Declarations of Conformity and Regulatory Information B-10 Cisco Aironet 1100 Series Access Point Hardware Installation Guide OL-4309-07
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 91
    Appendix B Declarations of Conformity and Regulatory Information Declaration of Conformity Statements OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide B-11
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 92
    Declaration of Conformity Statements Appendix B Declarations of Conformity and Regulatory Information B-12 Cisco Aironet 1100 Series Access Point Hardware Installation Guide OL-4309-07
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 93
    Appendix B Declarations of Conformity and Regulatory Information Declaration of Conformity Statements OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide B-13
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 94
    Declaration of Conformity Statements Appendix B Declarations of Conformity and Regulatory Information B-14 Cisco Aironet 1100 Series Access Point Hardware Installation Guide OL-4309-07
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 95
    IEEE 802.11g-compliant radio: 4.75 W (typical) 32 to 104oF (0 to 40oC) for the access point 32 to 104oF (0 to 40oC) for the power injector -13 to 158oF (-25 to 70oC) for access point 10.5 oz (297g) with 2.4-GHz radio OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide C-1
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 96
    ) IEEE 802.11g-compliant radio: Orthogonal Frequency Division Multiplex (OFDM) IEEE 802.11b-compliant radio: 1, 2, 5.5, and 11 Mbps IEEE 802.11g-compliant radio: 1, 2, 5.5, and 11 Mbps 6, 9, 12, 18, 24, 36, 48, and 54 Mbps Cisco Aironet 1100 Series Access Point Hardware Installation Guide C-2 OL
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 97
    in a building's environmental air space; no other power injectors or power modules have been tested to UL 2043 and they should not be placed in a building's environmental air space, such as above suspended ceilings. OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide C-3
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 98
    -003 Class B (Canada) AS/NZS 3548 Class B VCCI Class B EN 60601-1-2:2001 EN 301.489-1 EN 301.489-17 OET-65C RSS-102 ANSI C95.1 Cisco Aironet 1100 Series Access Point Hardware Installation Guide C-4 OL-4309-07
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 99
    Access Points. Click Install and Upgrade Guides. Click Channels and Maximum Power Settings for Cisco Aironet Autonomous Access Points and Bridges or the Channels and Maximum Power Settings for Cisco Aironet Lightweight Access Points and Bridges. OL-4309-07 Cisco Aironet 1100 Series Access Point
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 100
    Appendix D Channels and Maximum Power Levels Cisco Aironet 1100 Series Access Point Hardware Installation Guide D-2 OL-4309-07
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 101
    installation problems to primarily Ethernet and power areas. Figure E-1 illustrates a typical priming configuration for your lightweight access points. Figure E-1 Typical Lightweight Access Point Priming Configuration LWAPP LWAPP 158085 OL-4309-07 Cisco Aironet 1100 Series Access Point
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 102
    the network. You can also use a Cisco WCS server to control, configure, and redistribute all your lightweight access points from a single location. Apply power to the access points: a. Connect your lightweight access points to untagged access ports on your POE capable switch. You can optionally use
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 103
    the Controller Mobility Group name. Use controller CLI, controller GUI, or Cisco WCS to configure the lightweight access point-specific 802.11a, 802.11b, and 802.11g network settings. If the configuration priming was successful, the radio LED is blinking to indicate normal operation. Repeat
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 104
    This appendix contains these sections: • Overview, page F-2 • Configuring Option 43 for 1000 Series Access Points, page F-3 • Configuring Option 43 for 1100, 1130, 1200, 1240, and 1300 Series Access Points, page F-4 OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide F-1
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 105
    DHCP Option 43 for Lightweight Access Points Overview Overview This section contains a DHCP Option 43 configuration example on the embedded Cisco IOS DHCP server for use with Cisco Aironet lightweight access points. For instructions on configuring DHCP Option 43 on Microsoft, Sun Solaris
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 106
    are configuring option 43 for Cisco 1000 series access points using the controller IP addresses 10.126.126.2 and 10.127.127.2, add the following line to the DHCP pool in the Cisco IOS CLI: option 43 ascii "10.126.126.2,10.127.127.2" The quotation marks must be included. Cisco Aironet 1100 Series
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 107
    for Cisco Aironet 1100, 1130, 1200, 1240, and 1300 series lightweight access points in the embedded Cisco IOS DHCP server, follow these steps: Step 1 Step 2 Step 3 Step 4 Enter configuration mode at the Cisco IOS CLI. Create the DHCP pool, including the necessary parameters such as default router
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 108
    Appendix F Configuring DHCP Option 43 for Lightweight Access Points Configuring Option 43 for 1100, 1130, 1200, 1240, and 1300 Series Access Points Cisco Aironet 1100 Series Access Point Hardware Installation Guide F-5 OL-4309-07
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 109
    of IP addresses to devices on the network. A modulation technique used by IEEE 802.11b-compliant wireless LANs for transmission at 1 Mbps. A single data message (packet) sent to all addresses on the same subnet. OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide GL
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 110
    as other factors. A radio device that uses the services of an Access Point to communicate wirelessly with other devices on a local area network. Carrier sense multiple access. A wireless LAN media access method specified by the IEEE 802.11 specification. D data rates dBi DHCP dipole domain name DNS
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 111
    recognized on the LAN or if it must be reached through a gateway. This number is expressed in a form similar to an IP address; for example: 255.255.255.0. An antenna that radiates its signal in a spherical pattern. OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide GL-3
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 112
    as an access point or your client adapter. Any of several techniques for combining user information orthogonal A modulation technique used by IEEE 802.11a-compliant wireless LANs for Frequency Division transmission Cisco Aironet 1100 Series Access Point Hardware Installation Guide OL-4309-07
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 113
    Privacy. An optional security mechanism defined within the IEEE 802.11 standard designed to make the link integrity of wireless devices equal to that of a cable. A computing device with an installed client adapter. OL-4309-07 Cisco Aironet 1100 Series Access Point Hardware Installation Guide GL-5
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 114
    Glossary GL-6 Cisco Aironet 1100 Series Access Point Hardware Installation Guide OL-4309-07
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 115
    B-1 default configuration, resetting to defaults 5-7 deployment access points power C-1 installation guidelines 2-3 K key features 1-3 L LED indicators, radio traffic 5-2, 6-3 M MAC information 2-5 Mode button 5-9 modulation C-2 Cisco Aironet 1100 Series Access Point Hardware Installation Guide
  • Cisco AIR-AP1131AG-N-K9 | Hardware Installation Guide - Page 116
    site, Cisco Software Center 5-11, 6-6 weight, access point C-1 WEP key 5-5 S safety warnings, translated A-1 size, access point C-1 SSID, troubleshooting 5-5 status indicators 5-2, 6-3, C-1 storage temperature C-1 T temperature operating C-1 IN-2 Cisco Aironet 1100 Series Access Point Hardware
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116

Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 526-4100
Cisco Aironet 1100 Series Access Point
Hardware Installation Guide
December 2006
Text Part Number: OL-4309-07