Cisco ASR1006 Configuration Guide
Cisco ASR1006 - ASR 1006 Modular Expansion Base Manual
 |
UPC - 882658196423
View all Cisco ASR1006 manuals
Add to My Manuals
Save this manual to your list of manuals |
Cisco ASR1006 manual content summary:
- Cisco ASR1006 | Configuration Guide - Page 1
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide July 25, 2012 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number: OL-16506-11 - Cisco ASR1006 | Configuration Guide - Page 2
SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL . Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide Copyright © 2008 - 2012 Cisco Systems - Cisco ASR1006 | Configuration Guide - Page 3
Notes About Optional SubPackages 4 Provisioning Files 4 Important Notes About Provisioning Files 5 ROMmon Image 5 File to Upgrade Field Programmable Hardware Devices 5 Processes Overview 6 IOS as a Process 7 Dual IOS Processes 8 File Systems on the Cisco ASR 1000 Series Router 8 Autogenerated File - Cisco ASR1006 | Configuration Guide - Page 4
Getting Help 8 Finding Command Options 8 Using the no and default Forms of Commands 11 Saving Configuration Changes 12 Managing Configuration Files 12 Filtering the Output of the show and more Commands 13 Powering Off a Router 14 Finding Support Information for Platforms and Cisco Software Images 14 - Cisco ASR1006 | Configuration Guide - Page 5
2 ISSU Upgrade for Redundant Platforms 2 Overview of ISSU on the Cisco ASR 1000 Series Routers 2 ISSU Rollback Timer Overview 4 Software Upgrade with Dual IOS Processes on a Single RP Overview 4 Cisco IOS XE Software Package Compatibility for ISSU 4 Restrictions for ISSU 5 ISSU Upgrade Procedures - Cisco ASR1006 | Configuration Guide - Page 6
Upgrade in a Dual Route Processor Configuration (Prior to Cisco IOS XE 2.1.2) 75 Using ISSU to Upgrade SubPackages (Prior to Cisco IOS XE Release 2.1.2) 75 Upgrade Process With Service Impact for Nonredundant Platforms 76 Configuring SSO on a Cisco ASR 1001, Cisco ASR 1002, or Cisco ASR 1004 Router - Cisco ASR1006 | Configuration Guide - Page 7
9 ISG Scaling to Support Lite Sessions 10 Additional References 11 Related Documents 11 Standards 11 MIBs 11 RFCs 11 Technical Assistance 11 Feature Information for Broadband Scalability and Performance 12 Configuring Cisco License Call Home 1 Finding Feature Information in This Module 1 Contents - Cisco ASR1006 | Configuration Guide - Page 8
Pattern Matching 19 Configuring Contact Information 21 Example 22 Configuring the Number of Call Home Messages Sent Per Minute 23 Enabling and Disabling Call Home 23 Sending Call Home Communications Manually 24 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide viii OL - Cisco ASR1006 | Configuration Guide - Page 9
Licenses 2 Evaluation and Right-To-Use Licenses 3 How to Activate an Evaluation License 4 Configuration Examples for Right-To-Use Supported Software Licenses 5 Configuring Throughput 6 Example: Accepting Global EULA 6 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 10
the show license all Command 10 Additional References 11 Related Documents 11 MIBs 11 Technical Assistance 12 Feature Information for Cisco Right-To-Use License 13 Using the Management Ethernet Interface 1 Finding Feature Information in This Module 1 Contents 1 Gigabit Ethernet Management Interface - Cisco ASR1006 | Configuration Guide - Page 11
the Line to External Feature 10 Managing Synchronization on the Cisco ASR 1000 Series Router 11 Verifying the Network Synchronization Configuration 12 Troubleshooting the Network Synchronization Configuration 16 Additional References 18 Related Documents 18 Standards 18 MIBs 18 RFCs 18 Technical - Cisco ASR1006 | Configuration Guide - Page 12
Frame Relay 4 Configuring MPLS Layer 2 VPNs 1 Finding Feature Information 1 Contents 1 Overview of L2VPN Interworking 2 L2VPN Interworking Modes 2 Ethernet or Bridged Interworking 2 IP or Routed Interworking 3 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide xii OL - Cisco ASR1006 | Configuration Guide - Page 13
-PE Router 10 Example: Frame Relay-to-ATM Bridged Interworking on a Frame Relay-PE Router 16 Gigabit EtherChannel for Virtual Private Wire Service 17 Supported Modes 17 GEC Like-to-Like Mode 17 Any-to-GEC Mode 18 Restrictions for Gigabit EtherChannel for Virtual Private Wire Service 18 Configuring - Cisco ASR1006 | Configuration Guide - Page 14
a Startup Configuration File to an USB Flash Disk 14 Copying a Startup Configuration File to a TFTP Server 15 Enabling a Second IOS Process on a Single RP Using SSO 15 ISSU-Consolidated Package Upgrade 19 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide xiv OL - Cisco ASR1006 | Configuration Guide - Page 15
to these routers. For information on general software features that are also available on the Cisco ASR 1000 Series Routers, see the Cisco IOS XE technology guide for that specific software feature. OL-16506-11 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide xv - Cisco ASR1006 | Configuration Guide - Page 16
. • Added upgrade and file package information in the "Software Packaging and Architecture" chapter. • Added restriction regarding ISSU support in Cisco IOS XE Release 3.1S in "Software Upgrade Process" chapter. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide xvi OL - Cisco ASR1006 | Configuration Guide - Page 17
• Added support for the Call Home feature in the "Configuring Call Home" chapter. • Moved the ISSU compatibility tables into the Release Notes for Cisco ASR 1000 Series Aggregation Services Routers document. • Relocated other ISSU compatibility information into the "Software Upgrade Process" chapter - Cisco ASR1006 | Configuration Guide - Page 18
-To-Use License. Using the Management Ethernet Interface Provides an overview and configuration options for the Management Ethernet interface on the Cisco ASR 1000 Series Routers. Synchronous Ethernet Support On The Cisco Provides an overview and configuration options for the ASR 1000 Series - Cisco ASR1006 | Configuration Guide - Page 19
bold font italic font Indication Commands and keywords and user-entered text appear in bold font. Document titles, new or emphasized terms, and arguments for which you supply values are in italic font. OL-16506-11 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide xix - Cisco ASR1006 | Configuration Guide - Page 20
optional. Required alternative keywords are grouped in braces and separated by vertical bars. Optional will help you solve a problem. Caution Means reader be careful service and Cisco currently supports RSS version 2.0. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 21
Files, page 4 • ROMmon Image, page 5 • File to Upgrade Field Programmable Hardware Devices, page 5 ASR 1000 Series Routers Software Overview The Cisco ASR 1000 Series Routers run using Cisco IOS XE software. Cisco IOS XE is released using consolidated packages and optional subpackages. Each - Cisco ASR1006 | Configuration Guide - Page 22
request platform command-line interface commands. Beginning in Cisco IOS XE Release 2.4, support for a supplemental, optional subpackage of type called sipspawma is introduced to support the Cisco WebEx Node for ASR 1000 Series shared port adapter (SPA). Optional subpackages are installed similarly - Cisco ASR1006 | Configuration Guide - Page 23
. Provides the Cisco IOS kernel, which is where IOS features are stored and run. Each consolidated package has a different RPIOS. Provides the ESP operating system and control "Provisioning Files" section on page 4. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 3 - Cisco ASR1006 | Configuration Guide - Page 24
in Cisco IOS XE Release 2.4, the ASR 1000 Series Routers support a new type of subpackage-this is an optional software subpackage that is available as a separate, external package that is downloaded and installed along with the other required subpackages. sipspawmak9 is an optional subpackage - Cisco ASR1006 | Configuration Guide - Page 25
For additional information on ROMmon, see the Cisco ASR 1000 Series Routers Maintain and Operate Guide. File to Upgrade Field Programmable Hardware Devices Starting in Cisco IOS XE Release 3.1.0S, a hardware programmable package file used to upgrade field programmable hardware devices is released as - Cisco ASR1006 | Configuration Guide - Page 26
RP) SIP (one instance per SIP) RPControl SIPBase The IOS process implements all forwarding and routing features for the router. RP (one per software RPIOS redundancy instance per RP). Maximum of two instances per RP. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 27
a command-line interface in diagnostic mode that can be accessed in certain scenarios even if the IOS process fails. See the "Understanding the Diagnostic Mode" section on page 7 for information on diagnostic mode. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7 - Cisco ASR1006 | Configuration Guide - Page 28
a second IOS process can be enabled on a Cisco ASR 1002 or 1004 Router. On Cisco ASR 1000 Series Routers configured with dual Route Processors, the second IOS process runs on the standby Route Processor. The state of these dual IOS processes can be checked by entering the show platform command. The - Cisco ASR1006 | Configuration Guide - Page 29
in Table 3, enter the? help option or see the copy command reference for additional information on that file system. Autogenerated File Directories and Files This section discusses the autogenerated files and directories that might appear on your Cisco ASR 1000 Series Routers, and how the files in - Cisco ASR1006 | Configuration Guide - Page 30
Processes Overview Software Packaging and Architecture Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 10 - Cisco ASR1006 | Configuration Guide - Page 31
the no and default Forms of Commands, page 11 • Saving Configuration Changes, page 12 • Managing Configuration Files, page 12 • Filtering the Output of the show and more Commands, page 13 • Powering Off a Router, page 14 • Finding Support Information for Platforms and Cisco Software Images, page 14 - Cisco ASR1006 | Configuration Guide - Page 32
set on your system, this step may be skipped. The following example shows entry of the password enablepass: Password: enablepass When your enable password is accepted, the privileged EXEC mode prompt appears: Router# Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 2 - Cisco ASR1006 | Configuration Guide - Page 33
the aaa authentication login global configuration command. For more information about AAA services, see the Cisco IOS XE Security Configuration Guide, and the Cisco IOS Security Command Reference Guide. In addition, before you can make a Telnet connection to the router, you must have a valid host - Cisco ASR1006 | Configuration Guide - Page 34
auxiliary port on the Route Processor does not serve any useful purpose for customers. This port should only be accessed under the advisement of a customer support representative. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4 - Cisco ASR1006 | Configuration Guide - Page 35
commands with Ctrl-P or the Up Arrow key. Router# show history While in EXEC mode, list the last several commands you have just entered. 1. The arrow keys function only on ANSI-compatible terminals such as VT100s. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 36
. To return to privileged EXEC mode from global configuration mode, use the exit or end command. To return to global configuration mode, use the exit command. To return to privileged EXEC mode, use the end command. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 6 - Cisco ASR1006 | Configuration Guide - Page 37
router, including the IOS state. • Replace or roll back the configuration. • Provide methods of restarting the IOS or other processes. • Reboot hardware, such as the entire router, an RP, an ESP, a SIP, a SPA, or possibly other hardware components. Cisco ASR 1000 Series Aggregation Services Routers - Cisco ASR1006 | Configuration Guide - Page 38
limited access methods during failures, such as ROMmon, to diagnose and troubleshoot IOS problems. The diagnostic mode commands are stored in the nonIOS packages on the Cisco ASR 1000 Series Routers, which is why the commands are available even if the IOS process is not working properly. Importantly - Cisco ASR1006 | Configuration Guide - Page 39
Cisco IOS XE Software Getting Help Table 9 shows examples of how you can use the question mark (?) to assist you in entering commands. Table 9 Finding Command Options Command Router> enable Password: Router# Router# configure terminal Enter configuration commands, one per line. End - Cisco ASR1006 | Configuration Guide - Page 40
to configure for the interface. This example uses the ip command. Enter ? to display what you must enter next on the command line. This example shows only some of the available interface IP configuration commands. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 10 - Cisco ASR1006 | Configuration Guide - Page 41
the command when the default form performs a different function than the plain and no forms of the command. To see what default commands are available on your system, enter default ? in the appropriate command mode. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 11 - Cisco ASR1006 | Configuration Guide - Page 42
:24 -08:00 Dec 4 2007 06:06:36 -08:00 May 29 2008 16:31:41 -07:00 Dec 4 2007 04:34:45 -08:00 lost+found .ssh .rollback_timer .prst_sync .installer Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 12 - Cisco ASR1006 | Configuration Guide - Page 43
enter a show or more command followed by the "pipe" character ( | ); one of the keywords begin, include, or exclude; and a regular expression on which you want to search or filter (the expression is case sensitive): Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 13 - Cisco ASR1006 | Configuration Guide - Page 44
which Cisco IOS XE software images support a specific software release, feature set, or platform. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 14 - Cisco ASR1006 | Configuration Guide - Page 45
the software document for that feature, or to check the minimum software requirements of Cisco IOS XE software with the hardware installed on your router, Cisco maintains the Software Advisor tool on Cisco.com at http://www.cisco.com/cgi-bin/Support/CompNav/Index.pl. You must be a registered user on - Cisco ASR1006 | Configuration Guide - Page 46
Finding Support Information for Platforms and Cisco Software Images Using Cisco IOS XE Software Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 16 - Cisco ASR1006 | Configuration Guide - Page 47
following topics: • Console Port Overview for the Cisco ASR 1000 Series Routers, page 1 • Console Port Handling Overview, page 1 • Telnet and SSH Overview for the Cisco ASR 1000 Series Routers, page 2 • Persistent Telnet and Persistent SSH Overview, page 2 • Configuring a Console Port Transport Map - Cisco ASR1006 | Configuration Guide - Page 48
Cisco ASR 1000 Series Routers Telnet and Secure Shell (SSH) on the Cisco ASR 1000 Series Routers can be configured and handled like Telnet and SSH on other Cisco platforms. For information on traditional Telnet, see the line command in the Cisco IOS Terminal Services Command Reference guide located - Cisco ASR1006 | Configuration Guide - Page 49
the IOS vty line to become available. This is the default setting. Note Users can interrupt a waiting connection by entering Ctrl-C or Ctrl-Shift-6. • none-The console connection immediately enters diagnostic mode. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 3 - Cisco ASR1006 | Configuration Guide - Page 50
diagnostic mode X Router(config-tmap)# banner wait X Enter TEXT message. End with the character 'X'. Waiting for IOS vty line X Router(config-tmap)# exit Router(config)# transport type console 0 input consolehandler Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4 - Cisco ASR1006 | Configuration Guide - Page 51
on the Cisco ASR 1000 Series Router, local login authentication must be configured for the vty line (the login command in line configuration mode). If local login authentication is not configured, users will not be able to access IOS using a Telnet connection into the Management Ethernet interface - Cisco ASR1006 | Configuration Guide - Page 52
0). Persistent Telnet can only be applied to the Management Ethernet interface on the Cisco ASR 1000 Series Routers. This step must be taken before applying the transport map to the Management Ethernet interface. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 6 - Cisco ASR1006 | Configuration Guide - Page 53
. End with the character 'X'. --Waiting for IOS Process-X Router(config-tmap)# transport interface gigabitethernet 0 Router(config-tmap)# exit Router(config)# transport type persistent telnet input telnethandler Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7 - Cisco ASR1006 | Configuration Guide - Page 54
ssh transport-map-name Example: Router(config)# transport-map type persistent ssh sshhandler Creates and names a transport map for handling persistent SSH connections, and enters transport map configuration mode. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 8 - Cisco ASR1006 | Configuration Guide - Page 55
persistent SSH configuration. • wait-Creates a banner message seen by users waiting for the vty line to become active. • banner-message-The banner message, which begins and ends with the same delimiting character. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 9 - Cisco ASR1006 | Configuration Guide - Page 56
when the transport type persistent ssh input command is entered to enable persistent SSH: Router(config)# transport-map type persistent ssh sshhandler Router(config-tmap)# connection wait allow interruptible Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 10 - Cisco ASR1006 | Configuration Guide - Page 57
Map: Name: sshhandler Type: Persistent SSH Transport Interface: GigabitEthernet0 Connection: Wait option: Wait Allow Interruptable Wait banner: Waiting for IOS prompt Bshell banner: Welcome to Diagnostic Mode SSH: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 11 - Cisco ASR1006 | Configuration Guide - Page 58
SSH Transport Interface: GigabitEthernet0 Connection: Wait option: Wait Allow Interruptable Wait banner: Waiting for IOS prompt Bshell banner: Welcome to Diagnostic Mode Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 12 Console Port, Telnet, and SSH Handling - Cisco ASR1006 | Configuration Guide - Page 59
Mode Router# show transport-map name consolehandler Transport Map: Name: consolehandler Type: Console Transport Connection: Wait option: Wait Allow Interruptable Wait banner: Waiting for the IOS CLI Bshell banner: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 13 - Cisco ASR1006 | Configuration Guide - Page 60
both before the new transport map is enabled and after the transport map is enabled so the changes to the SSH configuration are illustrated in the output. Router# show platform software configuration access policy Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 14 - Cisco ASR1006 | Configuration Guide - Page 61
Shell banner: Welcome to Diagnostic Mode Wait banner : Waiting for IOS process Method : ssh Rule : wait with interrupt Shell banner: Welcome to Diag Mode Wait banner : Waiting for IOS Method : console Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 15 - Cisco ASR1006 | Configuration Guide - Page 62
any active Telnet or SSH sessions. • Configuring the diagnostic and wait banners is optional but recommended. The banners are especially useful as indicators to users of the status of their Telnet or SSH attempts. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 16 - Cisco ASR1006 | Configuration Guide - Page 63
and optional) are managed and are used to run the Cisco ASR 1000 Series Aggregation Services Routers. It contains the following sections: • Running the Cisco ASR 1000 Series Routers: An Overview, page 1 • Software File Management Using Command Sets, page 4 • Managing and Configuring the Router to - Cisco ASR1006 | Configuration Guide - Page 64
method. Running the Cisco ASR 1000 Series Routers Using a Consolidated Package: An Overview The Cisco ASR 1000 Series Routers can also be configured to run using a consolidated package. Note Booting the router from a consolidated package is not supported for installation of optional subpackages. For - Cisco ASR1006 | Configuration Guide - Page 65
, while the individual subpackage method requires the individual subpackage files to be copied into the bootflash: file directory on the router. Table 10 summarizes the advantages and disadvantages of the approaches. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 3 - Cisco ASR1006 | Configuration Guide - Page 66
on the Cisco ASR 1000 Series Routers. For additional information on each request platform command and the options available with each command, see the Cisco IOS Configuration Fundamentals Command Reference. The request platform software package command, which can be used to upgrade individual - Cisco ASR1006 | Configuration Guide - Page 67
of the RP slot and file-URL is the path to the file being used to upgrade the Cisco ASR 1000 Series Router. The command has other options; see the request platform software package command references for information on all of the options available with this command set. In Cisco IOS XE Release - Cisco ASR1006 | Configuration Guide - Page 68
and service impact will occur. Proceed with abort? [confirm] The issu runversion command is optional for completing a consolidated package upgrade on the Cisco ASR 1000 Series Routers. You can enter issu commitversion from the active RP to complete the software upgrade, then use the redundancy force - Cisco ASR1006 | Configuration Guide - Page 69
Package Using the request platform software package install Command, page 8 Managing and Configuring a Consolidated Package Using the copy Command To upgrade a consolidated package on the Cisco ASR 1000 Series Routers using the copy command, copy the consolidated package into the bootflash - Cisco ASR1006 | Configuration Guide - Page 70
--Finished installation state synchronization --- Starting file path checking --Finished file path checking --- Starting image file verification --Checking image file names Verifying image file locations Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 8 - Cisco ASR1006 | Configuration Guide - Page 71
copy Command" section on page 7 includes an example of how to configure the router to boot using the consolidated package, and then an example of what happens after the reload is performed to finish the installation. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 9 - Cisco ASR1006 | Configuration Guide - Page 72
system flash bootflash:packages.conf Router(config)# exit *May 11 01:31:04.815: %SYS-5-CONFIG_I: Configured from console by con Router# copy running-config startup-config Building configuration... [OK] Router# reload Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 10 - Cisco ASR1006 | Configuration Guide - Page 73
:46 -07:00 lost+found .ssh .rollback_timer .prst_sync .installer target_support_output.tgz.tgz 928862208 bytes total (503156736 bytes free) Router# request platform software bytes total (286662656 bytes free) Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 11 - Cisco ASR1006 | Configuration Guide - Page 74
extracted: Router# dir usb0: Directory of usb0:/ 1240 -rwx 208904396 May 27 2008 14:10:20 00 lost+found .rollback_timer .installer .ssh nvram_00100 .prst_sync 945377280 bytes total (695246848 bytes free) Router# Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 12 - Cisco ASR1006 | Configuration Guide - Page 75
The router is then configured to boot using the provisioning file. This example also shows the config-register being set and the running configuration being .tgz.tgz 928862208 bytes total (286662656 bytes free) Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 13 - Cisco ASR1006 | Configuration Guide - Page 76
To manage and configure a Cisco ASR 1000 Series Router to run using optional subpackages, perform the following tasks: • Installing an Optional SubPackage, page 15 • Uninstalling an Optional SubPackage, page 16 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 14 - Cisco ASR1006 | Configuration Guide - Page 77
packages Checking if resulting candidate package set would be complete Finished candidate package set construction --- Starting compatibility testing --Determining whether candidate package set is compatible Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 15 - Cisco ASR1006 | Configuration Guide - Page 78
an Optional SubPackage In Cisco IOS XE Release 2.4, the Cisco ASR 1000 Series Routers support removal of an installed optional subpackage. To uninstall an optional subpackage, perform the following steps: Step 1 On each RP in the system, use the request platform software package uninstall command as - Cisco ASR1006 | Configuration Guide - Page 79
. Step 2 Step 3 Use the show version provisioned command to verify that the optional subpackage is no longer installed. (Optional) Use the request platform software clean command to remove the unused packages. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 17 - Cisco ASR1006 | Configuration Guide - Page 80
subpackage installation to illustrate an individual subpackage upgrade. Although it does not comprehensively cover every possible individual subpackage upgrade scenario, the CLI for each type of upgrade is similar. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 18 - Cisco ASR1006 | Configuration Guide - Page 81
candidate package set infrastructure compatibility Checking infrastructure compatibility with running software Finished compatibility testing --- Starting impact testing --Checking operational impact of change Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 19 - Cisco ASR1006 | Configuration Guide - Page 82
of updates Unblocking peer synchronization of operating information Unmounting old packages Cleaning temporary installation files Finished update running software SUCCESS: Finished installing software. Router# Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 20 - Cisco ASR1006 | Configuration Guide - Page 83
mode The supported platforms include Cisco ASR 1006 and Cisco ASR 1013 Routers. • Upgrade process with service impact for nonredundant platforms-Non-hardware-redundant chassis models (such as the Cisco ASR 1001 Router, Cisco ASR 1002 Router and Cisco ASR 1004 Router) do not support ISSU upgrade or - Cisco ASR1006 | Configuration Guide - Page 84
Cisco IOS XE Release 2.1.2), page 74 Overview of ISSU on the Cisco ASR 1000 Series Routers For the Cisco ASR 1000 Series Routers, ISSU-compatibility depends on the software subpackage being upgraded and the hardware configuration. Consolidated packages are ISSU-compatible in dual RP configurations - Cisco ASR1006 | Configuration Guide - Page 85
of the Cisco ASR 1000 Series Routers subpackages and whether or not they can be upgraded without losing any network traffic in single and dual RP and ESP configurations using ISSU. Table 12 Limited Interruption Upgrade Compatibility Table SubPackage Nonredundant RP and ESP Redundant RP and ESP - Cisco ASR1006 | Configuration Guide - Page 86
on configuring a second IOS process on a single RP, see the "Using SubPackages for Software Upgrade on a Cisco ASR 1002 or Cisco ASR 1004 Router (software upgrade Command Set)" section on page 94. Cisco IOS XE Software Package Compatibility for ISSU When upgrading the Cisco IOS XE operating system - Cisco ASR1006 | Configuration Guide - Page 87
they support ISSU. All ISSU upgrades include at least one IOS switchover operation. It is important to understand which features are in use and whether these features are ISSU compatible. Cisco ASR1006 or ASR 1013 series routers are hardware-redundant chassis. The hardware-redundant chassis has - Cisco ASR1006 | Configuration Guide - Page 88
port 8. issu acceptversion 9. issu commitversion 10. show version, show version active-RP running, show version active-RP provisioned show platform show running-configuration 11. hw-module slot RP slot number reload Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 6 - Cisco ASR1006 | Configuration Guide - Page 89
RP. Example: Router# issu loadversion rp 1 file stby-bootflash:asr1000rp1-adventerprisek9.02.01.01.12 2-33.XNA1.bin After you receive the message indicating that the terminal state has been reached, go on to Step 17. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 90
shows access to the console port from a UNIX host using telnet. (Optional) Stops the ISSU rollback timer. This step is optional as long as Step 20 is completed before the rollback timer expires. Completes the ISSU upgrade. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration - Cisco ASR1006 | Configuration Guide - Page 91
ISSU Upgrade for Redundant Platforms Step 21 Command or Action show version show version active-RP running show version active-RP provisioned show platform show running-configuration Step 22 hw-module slot RP-slot reload Example: Router# hw-module slot R0 reload Purpose (Optional) Enter the show - Cisco ASR1006 | Configuration Guide - Page 92
.01.00.122-33.XNA.pkg 43977 -rw- 34324684 Jun 5 2008 20:16:59 -07:00 asr1000rp1-sipbase.02.01.00.122-33.XNA.pkg Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 10 - Cisco ASR1006 | Configuration Guide - Page 93
-Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 12.2(33)XNA, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by Cisco Systems, Inc. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 11 - Cisco ASR1006 | Configuration Guide - Page 94
ISSU to Upgrade the SubPackages on a Cisco ASR 1006 or ASR 1013 Router (issu Command Set), page 13 • Using ISSU to Upgrade SubPackages on a Cisco ASR 1006 Router or ASR 1013 Router (request platform command set), page 46 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 95
Upgrade Process ISSU Upgrade for Redundant Platforms Using ISSU to Upgrade the SubPackages on a Cisco ASR 1006 or ASR 1013 Router (issu Command Set) This section provides the instructions for performing an ISSU upgrade using subpackages on a Cisco ASR 1006 router or ASR 1013 router with a dual RP - Cisco ASR1006 | Configuration Guide - Page 96
active-RP file URL-to-active-file-system:asr1000rp1*version*.pkg force 15. show version active-RP provisioned show version active-RP installed 16. redundancy force-switchover 17. request platform software package clean Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 97
: usb0:221subs Purpose (Optional) Use the following commands to confirm the current router configuration, as follows: • show version and show version active-rp installed-Verify the running version of the Cisco IOS XE software on the router, and which file was used to boot the router, and where that - Cisco ASR1006 | Configuration Guide - Page 98
platform software package clean command after the ISSU upgrade has been completed. dir target-URL Example: (Optional) Display the directory to confirm that the files were extracted. Router# dir usb0:221subs Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 16 - Cisco ASR1006 | Configuration Guide - Page 99
.0 2.02.01.122-33.XNB1.pkg bootflash: Router# copy usb0:221subs/asr1000rp1-sipbase.02.02.01.122-33 .XNB1.pkg bootflash: Router# copy usb0:221subs/asr1000rp1-sipspa.02.02.01.122-33. XNB1.pkg bootflash: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 17 - Cisco ASR1006 | Configuration Guide - Page 100
. Step 11 Example: Router# issu loadversion rp 1 file stby-bootflash:asr1000rp*02.02.01.122-33.XNB1*. pkg force hw-module slot standby-RP reload Reload the standby RP. Example: Router# hw-module slot R1 reload Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 18 - Cisco ASR1006 | Configuration Guide - Page 101
show version active-RP provisioned show version active-RP installed (Optional) Confirm that the subpackages are provisioned and installed. Example: Router# show version r0 provisioned Router# show version r0 installed Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 102
software package clean Examples The following example shows ISSU upgrade using subpackages on a Cisco ASR 1006 router or ASR 1013 router with a dual RP setup using the issu command set Router# show version Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 12.2(33 - Cisco ASR1006 | Configuration Guide - Page 103
Software Upgrade Process ISSU Upgrade for Redundant Platforms File SHA1 checksum: 174bef13f7ce20af077bae7aaefb5279c790dd57 Package: rpbase, .pkg , on: RP1 Built: 2008-09-24_03.46, by: mcpre Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 21 - Cisco ASR1006 | Configuration Guide - Page 104
ISSU Upgrade for Redundant Platforms Software Upgrade Process File SHA1 checksum: b0dc8e07cd4f997b045280fa79051e41068c6f3e Package: rpcontrol, .pkg, on: SIP0/0 Built: 2008-09-24_03.46, by: mcpre Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 22 - Cisco ASR1006 | Configuration Guide - Page 105
Software Upgrade Process ISSU Upgrade for Redundant Platforms File SHA1 checksum: 337c662bcea5d34736e6df3acf7d7cb2a0a8c2f7 Package: sipspa, .pkg, on: SIP1/3 Built: 2008-09-24_03.46, by: mcpre Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 23 - Cisco ASR1006 | Configuration Guide - Page 106
ISSU Upgrade for Redundant Platforms Software Upgrade Router# mkdir usb0:221subs Create directory filename [221subs]? Created dir bootflash:221subs Router(config)# ip tftp source-interface gigabitethernet 0 Router Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 24 - Cisco ASR1006 | Configuration Guide - Page 107
20533452 bytes copied in 2.346 secs (8752537 bytes/sec) Router# copy usb0:221subs/asr1000rp1-rpbase.02.02.01.122-33.XNB1.pkg bootflash: Destination filename [asr1000rp1-rpbase.02.02.01.122-33.XNB1.pkg]? Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 25 - Cisco ASR1006 | Configuration Guide - Page 108
ISSU Upgrade for Redundant Platforms Software Upgrade Process Copy in progress... CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 26 - Cisco ASR1006 | Configuration Guide - Page 109
Upgrade Process ISSU Upgrade for Redundant (9329830 bytes/sec) Router# copy usb0:221subs/asr1000rp1-sipspa.02.02.01.122-33.XNB1.pkg stby-bootflash: Destination filename [asr1000rp1-sipspa.02.02.01.122-33.XNB1.pkg]? Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 27 - Cisco ASR1006 | Configuration Guide - Page 110
. Router# hw-module slot r1 reload Router# *Sep 25 19:16:29.709: %ASR1000_OIR-6-OFFLINECARD: Card (rp) offline in slot R1 *Sep 25 19:16:29.787: %REDUNDANCY-3-STANDBY_LOST: Standby processor fault (PEER_NOT_PRESENT) Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 28 - Cisco ASR1006 | Configuration Guide - Page 111
: Software sets are identified as compatible Checking IPC compatibility with running software Checking candidate package set infrastructure compatibility Checking infrastructure compatibility with running software Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 29 - Cisco ASR1006 | Configuration Guide - Page 112
in subslot 0/0. *Sep 29 15:13:21.634: %SPA_OIR-6-ONLINECARD: SPA (SPA-4XT-SERIAL) online in subslot 0/0Cleaning temporary installation files Finished update running software SUCCESS: Finished installing software. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 30 - Cisco ASR1006 | Configuration Guide - Page 113
package set construction --- Starting compatibility testing --Determining whether candidate package set is compatible WARNING: WARNING: Candidate software combination not found in compatibility database WARNING: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 31 - Cisco ASR1006 | Configuration Guide - Page 114
-6-ONLINECARD: SPA (SPA-2X1GE-V2) online in subslot 1/1 *Sep 29 15:18:33.572: %SPA_OIR-6-ONLINECARD: SPA (SPA-1XOC12-POS) online in subslot 1/3Cleaning temporary installation files Finished update running software Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 32 - Cisco ASR1006 | Configuration Guide - Page 115
package set construction --- Starting compatibility testing --Determining whether candidate package set is compatible WARNING: WARNING: Candidate software combination not found in compatibility database WARNING: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 33 - Cisco ASR1006 | Configuration Guide - Page 116
Starting installation state synchronization --Finished installation state synchronization --- Starting file path checking --Finished file path checking --- Starting image file verification --Checking image file names Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 34 - Cisco ASR1006 | Configuration Guide - Page 117
latest command shortlist lookup file Finding latest command shortlist file Assembling CLI output libraries Assembling CLI input libraries Applying interim IPC and database definitions Replacing running software Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 35 - Cisco ASR1006 | Configuration Guide - Page 118
: Candidate software combination not found in compatibility database WARNING: Determining whether installation is valid Software sets are identified as compatible Checking IPC compatibility with running software Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 36 - Cisco ASR1006 | Configuration Guide - Page 119
path checking --- Starting image file verification --Checking image file names Verifying image file locations Locating image files and validating name syntax Inspecting image file types Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 37 - Cisco ASR1006 | Configuration Guide - Page 120
ISSU Upgrade for Redundant Platforms Software Upgrade Process WARNING: In-service installation of IOSD package WARNING: requires software redundancy on target RP WARNING: or on-reboot parameter WARNING: Automatically setting the on-reboot flag WARNING: In-service installation of RP Base package - Cisco ASR1006 | Configuration Guide - Page 121
on: RP1/0 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: a4967ac35d6ac37ef275b28e032773762be9f202 Package: rpcontrol, version: BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1, status: inactive Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 39 - Cisco ASR1006 | Configuration Guide - Page 122
ISSU Upgrade for Redundant Platforms Software Upgrade Process File: bootflash:asr1000rp1-rpcontrol.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_01 00_1.pkg, on: RP1 , by: mcpre File SHA1 checksum: unknown Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 40 - Cisco ASR1006 | Configuration Guide - Page 123
Software Upgrade Process ISSU Upgrade for Redundant Platforms Package: 2008-09-24_03.52, by: mcpre File SHA1 checksum: unknown Router# show version r1 provisioned Package: Provisioning File, version: n/a, status: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 41 - Cisco ASR1006 | Configuration Guide - Page 124
ISSU Upgrade for Redundant Platforms Software Upgrade Process File SHA1 checksum: a544cd10841b237066ccbc4714f4e23c00a9d2e5 Package: rpios XNB1_LATEST_20080924_01 00_1.pkg, on: RP1/1 Built: 2008-09-24_03.52, by: mcpre Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 42 - Cisco ASR1006 | Configuration Guide - Page 125
Software Upgrade Process ISSU Upgrade for Redundant Platforms File SHA1 checksum: a544cd10841b237066ccbc4714f4e23c00a9d2e5 Package: rpios- : SIP1/2 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: unknown Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 43 - Cisco ASR1006 | Configuration Guide - Page 126
ISSU Upgrade for Redundant Platforms Software Upgrade Process Package mcpre File SHA1 checksum: unknown Router# redundancy force-switchover Proceed with switchover to standby RP? [confirm] Manual Swact = enabled *Sep Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 44 - Cisco ASR1006 | Configuration Guide - Page 127
-rpcontrol.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pk g ... done. Deleting file bootflash:asr1000rp1-rpios-adventerprisek9.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_200809 24_0100_1.pkg ... done. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 45 - Cisco ASR1006 | Configuration Guide - Page 128
To perform an ISSU upgrade using subpackages on a Cisco ASR 1006 router or ASR 1013 router with a dual RP setup using the request platform command set, follow the following instructions. SUMMARY STEPS 1. show version show version active-rp installed show version standby-rp installed dir filesystem - Cisco ASR1006 | Configuration Guide - Page 129
active-RP file URL-to-active-file-system:asr1000rp*version*.pkg force 14. show version active-RP provisioned show version active-RP installed 15. redundancy force-switchover 16. request platform software package clean Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 130
: usb0:221subs Purpose (Optional) Use the following commands to confirm the current router configuration, as follows: • show version and show version active-rp installed-Verify the running version of the Cisco IOS XE software on the router, and which file was used to boot the router, and where that - Cisco ASR1006 | Configuration Guide - Page 131
platform software package clean command after the ISSU upgrade has been completed. dir target-URL Example: (Optional) Displays the directory to confirm that the files were extracted. Router# dir usb0:221subs Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 49 - Cisco ASR1006 | Configuration Guide - Page 132
.0 2.02.01.122-33.XNB1.pkg bootflash: Router# copy usb0:221subs/asr1000rp1-sipbase.02.02.01.122-33 .XNB1.pkg bootflash: Router# copy usb0:221subs/asr1000rp1-sipspa.02.02.01.122-33. XNB1.pkg bootflash: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 50 - Cisco ASR1006 | Configuration Guide - Page 133
upgrade release. Step 10 Example: Router# request platform software package install rp 1 file stby-bootflash:asr1000rp*02.02.01.122-33.XNB1*. pkg force hw-module slot standby-RP reload Reloads the standby RP. Example: Router# hw-module slot R1 reload Cisco ASR 1000 Series Aggregation Services - Cisco ASR1006 | Configuration Guide - Page 134
show version active-RP provisioned show version active-RP installed (Optional) Confirms the subpackages are provisioned and installed. Example: Router# show version r0 provisioned Router# show version r0 installed Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 135
Forces an RP switchover to complete the upgrade. (Optional) Removes all unused subpackage files from the router. Examples This example shows ISSU upgrade using subpackages on a Cisco ASR 1006 router or ASR 1013 router with a dual RP setup: Router# show version Cisco IOS Software, IOS-XE Software - Cisco ASR1006 | Configuration Guide - Page 136
ISSU Upgrade for Redundant Platforms Software Upgrade Process Package: rpbase, version: RP1 Built: 2008-09-24_03.46, by: mcpre File SHA1 checksum: b0dc8e07cd4f997b045280fa79051e41068c6f3e Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 137
status: active File: bootflash:asr1000rp1-sipspa.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg, on: SIP0/0 Built: 2008-09-24_03.46, by: mcpre File SHA1 checksum: 337c662bcea5d34736e6df3acf7d7cb2a0a8c2f7 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 55 - Cisco ASR1006 | Configuration Guide - Page 138
ISSU Upgrade for Redundant Platforms Software Upgrade Process Package: sipspa, version: BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1, mcpre File SHA1 checksum: 337c662bcea5d34736e6df3acf7d7cb2a0a8c2f7 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 56 - Cisco ASR1006 | Configuration Guide - Page 139
Upgrade Process ISSU Upgrade for Redundant Router# mkdir usb0:221subs Create directory filename [221subs]? Created dir bootflash:221subs Router(config)# ip tftp source-interface gigabitethernet 0 Router bytes] Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 57 - Cisco ASR1006 | Configuration Guide - Page 140
20533452 bytes copied in 2.346 secs (8752537 bytes/sec) Router# copy usb0:221subs/asr1000rp1-rpbase.02.02.01.122-33.XNB1.pkg bootflash: Destination filename [asr1000rp1-rpbase.02.02.01.122-33.XNB1.pkg]? Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 58 - Cisco ASR1006 | Configuration Guide - Page 141
Software Upgrade Process ISSU Upgrade for Redundant Platforms Copy in progress... CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 59 - Cisco ASR1006 | Configuration Guide - Page 142
ISSU Upgrade for Redundant Platforms Software Upgrade bytes/sec) Router# copy usb0:221subs/asr1000rp1-sipspa.02.02.01.122-33.XNB1.pkg stby-bootflash: Destination filename [asr1000rp1-sipspa.02.02.01.122-33.XNB1.pkg]? Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 60 - Cisco ASR1006 | Configuration Guide - Page 143
In-service installation of IOSD package WARNING: requires software redundancy on target RP WARNING: Router# hw-module slot r1 reload Router# *Sep 25 18:20:15.371: %ASR1000_OIR-6-OFFLINECARD: Card (rp) offline in slot R1 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 144
: Candidate software combination not found in compatibility database WARNING: WARNING: WARNING: Candidate software combination not found in compatibility database WARNING: Software sets are identified as compatible Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 62 - Cisco ASR1006 | Configuration Guide - Page 145
of operating information *Sep 29 13:49:01.336: %SPA_OIR-6-ONLINECARD: SPA (SPA-4XT-SERIAL) online in subslot 0/0 *Sep 29 13:49:03.344: %LINK-3-UPDOWN: Interface Serial0/0/2, changed state to downUnmounting old packages Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 146
file names Verifying image file locations Locating image files and validating name syntax Inspecting image file types Processing image file constraints Creating candidate provisioning file Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 64 - Cisco ASR1006 | Configuration Guide - Page 147
compatibility Checking infrastructure compatibility with running software Checking package specific compatibility Finished compatibility testing --- Starting impact testing --Checking operational offline in subslot 1/3 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 65 - Cisco ASR1006 | Configuration Guide - Page 148
ISSU Upgrade for Redundant Platforms Software Upgrade Process *Sep 29 13:53:45.225: %ASR1000_OIR-6-ONLINECARD: Card (cc) online in slot operating 54:10. command output Constructing merge of running and candidate packages Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 149
--Finished installation state synchronization --- Starting file path checking --Finished file path checking --- Starting image file verification --Checking image file names Verifying image file locations Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 67 - Cisco ASR1006 | Configuration Guide - Page 150
lookup file Finding latest command shortlist file Assembling CLI output libraries Assembling CLI input libraries Applying interim IPC and database definitions Replacing running software Replacing CLI software Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 68 - Cisco ASR1006 | Configuration Guide - Page 151
infrastructure compatibility with running software Checking package specific compatibility Finished compatibility testing --- Starting impact testing --Checking operational impact of change Finished impact testing Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 69 - Cisco ASR1006 | Configuration Guide - Page 152
image file types WARNING: In-service installation of IOSD package WARNING: requires software redundancy on target RP WARNING: or on-reboot parameter WARNING software set Processing candidate provisioning file Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 70 - Cisco ASR1006 | Configuration Guide - Page 153
:asr1000rp1-rpios-adventerprisek9.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST _20080924_0100_1.pkg, on: RP0/0 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: a4967ac35d6ac37ef275b28e032773762be9f202 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 71 - Cisco ASR1006 | Configuration Guide - Page 154
ISSU Upgrade for Redundant Platforms Software Upgrade Process Package: rpcontrol, version: BLD_V122_33_XNB_ASR_02.02. RP1/1 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: a4967ac35d6ac37ef275b28e032773762be9f202 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 155
Software Upgrade Process ISSU Upgrade for Redundant Platforms Package: rpios-adventerprisek9, version: unknown, status: active File: unknown, on: : SIP2 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: unknown Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 73 - Cisco ASR1006 | Configuration Guide - Page 156
be followed only if you are upgrading using ISSU to a pre-Cisco IOS XE 2.1.2 release. If you are using Cisco IOS XE Release 2.2.1 or later, follow the earlier instructions in this chapter to perform your ISSU upgrade. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 74 - Cisco ASR1006 | Configuration Guide - Page 157
for instructions on performing this process. Using ISSU to Upgrade SubPackages (Prior to Cisco IOS XE Release 2.1.2) This procedure will work on single RPs configured to run two IOS processes or on routers configured with dual RPs. Versions of Cisco IOS XE Release 2.1 prior to Cisco IOS XE Release - Cisco ASR1006 | Configuration Guide - Page 158
to the router operating system and ROMmon is lost for a period of time. For non-hardware-redundant chassis types, SIP impact can be mitigated by installing SIPs one slot at a time if SPAs are redundant across SIPs (such as when using Gigabit Etherchannel). ESP redundancy provides similar capability - Cisco ASR1006 | Configuration Guide - Page 159
, Cisco ASR 1002, or Cisco ASR 1004 Router The following instructions show how to configure SSO on a Cisco ASR 1001, Cisco ASR 1002, and Cisco ASR 1004 Routers. The standby IOS process is created automatically as part of these configuration steps. Step 1 (Optional) Enter the show version command - Cisco ASR1006 | Configuration Guide - Page 160
/0 is the active IOS process and R0/1 is the standby IOS process: Router# show platform Chassis type: ASR1004 Slot Type State Insert time (ago) 0 ASR1000-SIP10 ok 00:52:34 0/0 SPA-2X1GE-V2 ok 00:51:30 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 78 - Cisco ASR1006 | Configuration Guide - Page 161
software upgrade for Cisco ASR 1001 Router running subpackages. These instructions assume two IOS processes are active on the RP and that the router is already running using subpackages. SUMMARY STEPS 1. show version show version installed dir filesystem: show platform show redundancy - Cisco ASR1006 | Configuration Guide - Page 162
rp 0 file file-system:asr1001-{rpbase,sipbase,sipspa,espbase}*version*.pkg force 16. show version installed 17. reload Note Step 17 does not have to be performed immediately, and should be done at a convenient time. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 163
to-target-location Example: Router# copy tftp: 221subs Purpose (Optional) Use the following commands to confirm the current router configuration, as follows: • show version and show version active-rp installed-Verify the running version of the Cisco IOS XE software on the router, and which file was - Cisco ASR1006 | Configuration Guide - Page 164
/asr1001-rpios-universalk9.03.02.01.S.151-1. S1_2.pkg bootflash: Router# copy 221subs/asr1001-sipbase.03.02.01.S.151-1.S1_2.pkg bootflash: Router# copy 221subs/asr1001-sipspa.03.02.01.S.151-1.S1_2.pkg bootflash: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 82 - Cisco ASR1006 | Configuration Guide - Page 165
: Router# issu loadversion rp 0 file bootflash:asr1001-{rpaccess,rpios,rpcontrol}*03.02. 01.S.151-1.S1_2*.pkg bay 0 force Step 14 issu commitversion Commit the software version. Example: Router# issu commitversion Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 166
Cisco IOS XE Releases. See the "ISSU Procedures (Prior to Cisco IOS XE Release 2.1.2)" section on page 74 for pre-Cisco IOS XE Release 2.1.2 ISSU upgrade procedures. (Optional) Verify that the subpackages are properly installed. (Optional) Reload the RP. Tip The router will continue normal operation - Cisco ASR1006 | Configuration Guide - Page 167
ipbase cisco ASR1001 (1RU) processor with 3851680K/6147K bytes of memory. 6 Gigabit Ethernet interfaces 32768K bytes of non-volatile configuration memory. 8388608K bytes of physical memory. 7782399K bytes of eUSB flash at bootflash:. Configuration register is 0x8102 Router# show version installed - Cisco ASR1006 | Configuration Guide - Page 168
//auto/users/asr1001-universalk9.03.02.01.S.151-1.S1_2.bin,12... Loading /auto/users/asr1001-universalk9.03.02.01.S.151-1.S1.bin,12 (via GigabitEthernet0 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 86 - Cisco ASR1006 | Configuration Guide - Page 169
Software Upgrade Process Upgrade Process With Service Impact for Nonredundant Platforms OK - 209227980 bytes] 209227980 bytes copied in 880.002 secs (237759 bytes/sec) Router# request platform software package Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 170
.S.151-1.S1_2.pkg bay 1 force --- Starting local lock acquisition on R0 --Finished local lock acquisition on R0 --- Starting file path checking --Finished file path checking Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 88 - Cisco ASR1006 | Configuration Guide - Page 171
Added asr1001-rpios-universalk9.03.02.01.S.151-1.S1_2.pkg Finished list of software package changes --- Starting commit of software changes --Updating provisioning rollback files Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 89 - Cisco ASR1006 | Configuration Guide - Page 172
.015: %REDUNDANCY-3-SWITCHOVER: RP switchover (PEER_REDUNDANCY_) *Mar 15 16:31:00.328: %LINK-3-UPDOWN: Interface Lsmpi0, changed state to up *Mar 15 16:31:00.328: %LINK-3-UPDOWN: Interface EOBC0, changed state to up Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 90 - Cisco ASR1006 | Configuration Guide - Page 173
Checking IPC compatibility with running software Checking candidate package set infrastructure compatibility Checking infrastructure compatibility with running software Checking package specific compatibility Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 91 - Cisco ASR1006 | Configuration Guide - Page 174
: Throughput liceG *Mar 15 16:37:06.571: %CMRP-5-PRERELEASE_HARDWARE: R0/0: cmand: 0 is pre-relean Notifying running software of updates Unblocking peer synchronization of operating information Unmounting old packages Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 92 - Cisco ASR1006 | Configuration Guide - Page 175
-rpbase.03.02.01.S.151-1.S1.pkg Removed asr1001-sipbase.03.02.01.S.151-1.S1.pkg Removed asr1001-sipspa.03.02.01.S.151-1.S1.pkg Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 93 - Cisco ASR1006 | Configuration Guide - Page 176
and configuring two IOS processes on the same RP, see the "Using SubPackages for Software Upgrade on a Cisco ASR 1002 or Cisco ASR 1004 Router (software upgrade Command Set)" section on page 94. SUMMARY STEPS 1. show version show version installed dir filesystem: show platform show - Cisco ASR1006 | Configuration Guide - Page 177
:asr1000rp*version*.pkg 19. show version installed 20. reload 21. request platform software package clean Note Step 19, 20, and 21 does not have to be performed immediately, and can be done at a convenient time. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 95 - Cisco ASR1006 | Configuration Guide - Page 178
: usb0:221subs Purpose (Optional) Use the following commands to confirm the current router configuration, as follows: • show version and show version active-rp installed-Verify the running version of the Cisco IOS XE software on the router, and which file was used to boot the router, and where that - Cisco ASR1006 | Configuration Guide - Page 179
platform software package clean command after the ISSU upgrade has been completed. dir target-URL Example: (Optional) Display the directory to confirm that the files were extracted. Router# dir usb0:221subs Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 97 - Cisco ASR1006 | Configuration Guide - Page 180
rp 0 file bootflash:asr1000rp1-{rpaccess,rpios,rpcontrol} *02.02.01.122-33.XNB1*.pkg bay 1 force issu commitversion Example: Once the SSO state is reached, commit the software version. Router# issu commitversion Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 181
XE Release 2.1.2 and are not available in previous Cisco IOS XE Releases. See the "ISSU Procedures (Prior to Cisco IOS XE Release 2.1.2)" section on page 74 for pre-Cisco IOS XE Release 2.1.2 ISSU upgrade procedures. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 99 - Cisco ASR1006 | Configuration Guide - Page 182
or a slower traffic period. (Optional) Removes the unused subpackages from the router. Examples The following example shows the software upgrade for Cisco ASR 1002 or 1004 Router running sub-packages: Router# show version Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9 - Cisco ASR1006 | Configuration Guide - Page 183
(Configured) = sso Redundancy State = sso Maintenance Mode = Disabled Manual Swact = disabled (peer unit not yet in terminal standby state) Communications = Up client count = 67 client_notification_TMR = 30000 milliseconds RF debug mask = 0x0 Router# show platform Chassis type: ASR1004 Slot - Cisco ASR1006 | Configuration Guide - Page 184
Process With Service Impact for Nonredundant Platforms Software Upgrade Process Router# copy tftp: usb0:221subs Address or name of remote host []? 172.17.16.81 Source filename []? /auto/users/asr1000rp1-adventerprisek9 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 185
Upgrade Process Upgrade Process With Service (9329830 bytes/sec) Router# copy usb0:221subs/asr1000rp1-sipspa.02.02.01.122-33.XNB1.pkg bootflash: Destination filename [asr1000rp1-sipspa.02.02.01.122-33.XNB1.pkg]? Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 103 - Cisco ASR1006 | Configuration Guide - Page 186
of change WARNING: Connection may be lost during installation of IOS package Finished impact testing --- Starting commit of software changes --Updating provisioning rollback files Creating pending provisioning file 104 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 187
for (SSO) Router# Router# issu commitversion --- Starting installation changes --Cancelling rollback timer Finished installation changes SUCCESS: Installation changes committed Router# redundancy force-switchover Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 105 - Cisco ASR1006 | Configuration Guide - Page 188
(5)) *Sep 25 18:11:00.500: %HA_CONFIG_SYNC-6-BULK_CFGSYNC_SUCCEED: Bulk Sync succeeded *Sep 25 18:11:00.502: %RF-5-RF_TERMINAL_STATE: Terminal state reached for (SSO) Router# show platform Chassis type: ASR1004 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 189
specific compatibility Finished compatibility testing --- Starting impact testing --Checking operational impact of change WARNING: Connection may be lost during installation of IOS package Finished impact testing Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 190
-5-PEER_MONITOR_EVENT: Active detected a standby insertion (raw-event=PEER_FOUND(4)) *Sep 25 18:14:47.299: %REDUNDANCY-5-PEER_MONITOR_EVENT: Active detected a standby insertion (raw-event=PEER_REDUNDANCY_STATE_CHANGE(5)) Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 191
Upgrade Process Upgrade Process With Service Impact for Nonredundant Platforms Router# issu loadversion rp 0 file bootflash:asr1000rp1-{sipspa,sipbase}*02.02.01.122-33.XNB1*.pkg slot of operating information Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 109 - Cisco ASR1006 | Configuration Guide - Page 192
(SPA-5X1GE-V2) online in subslot 0/3 Router# Router# Router# issu commitversion --- Starting installation changes --Cancelling rollback timer Finished installation changes SUCCESS: Installation changes committed 110 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 193
latest command shortlist file Assembling CLI output libraries Assembling CLI input libraries Applying interim IPC and database definitions Replacing running software Replacing CLI software Restarting software Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 111 - Cisco ASR1006 | Configuration Guide - Page 194
with running software Checking candidate package set infrastructure compatibility Checking infrastructure compatibility with running software Checking package specific compatibility Finished compatibility testing 112 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 195
bin/cpp-mcplo-ucode *Sep 25 18:24:01.077: %CPPHA-7-READY: F0: cpp_ha: CPP 0 loading and initialization complete Router# *Sep 25 18:24:01.077: %CPPHA-6-SYSINIT: F0: cpp_ha: CPP HA system configuration start. Router# Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 113 - Cisco ASR1006 | Configuration Guide - Page 196
. Router# show version provisioned Package: Provisioning File, version: n/a, status: active File: bootflash:packages.conf, on: RP0 Built: n/a, by: n/a File SHA1 checksum: aca136bd8bcb99f87e6aa7a0ce2a92a3b5a5a200 114 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 197
File: bootflash:asr1000rp1-rpaccess.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_010 0_1.pkg, on: RP1 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: 7c8dfdf9b2e3602b0c6c531a88dd93c8d2d180c6 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 115 - Cisco ASR1006 | Configuration Guide - Page 198
BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST _20080924_0100_1.pkg, on: RP1/1 Built: 2008-09-24_03.52, by: mcpre File unknown Package: rpios-adventerprisek9, version: unknown, status: active File: unknown, on: SIP0/3 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 199
Software Upgrade Process Upgrade Process With Service Impact for Nonredundant Platforms Built: 2008-09-24_03.52, by: mcpre asr1000rp1-espbase.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1.pkg Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 117 - Cisco ASR1006 | Configuration Guide - Page 200
Upgrade Process With Service Impact for Nonredundant Platforms Software Upgrade Process asr1000-rommon.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg ... done. Deleting file bootflash:asr1000-rommon. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 201
or Cisco ASR 1004 Router (software upgrade Command Set)" section on page 94. SUMMARY STEPS 1. show version show version installed dir filesystem: show platform show redundancy-states 2. redundancy mode sso Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 202
:asr1000rp*version*.pkg 16. show version provisioned 17. reload 18. request platform software package clean Note Step 16, 17, 18 does not have to be performed immediately, and can be done at a convenient time. 120 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 203
: usb0:221subs Purpose (Optional) Use the following commands to confirm the current router configuration, as follows: • show version and show version active-rp installed-Verify the running version of the Cisco IOS XE software on the router, and which file was used to boot the router, and where that - Cisco ASR1006 | Configuration Guide - Page 204
platform software package clean command after the ISSU upgrade has been completed. dir target-URL Example: (Optional) Display the directory to confirm that the files were extracted. Router# dir usb0:221subs 122 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 205
, RPIOS, and RPControl subpackages in the standby bay. Example: Router# request platform software package install rp 0 file bootflash:asr1000rp1-{rpaccess,rpios,rpcontrol} *02.02.01.122-33.XNB1*.pkg bay 1 force Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 123 - Cisco ASR1006 | Configuration Guide - Page 206
Release 2.1.2 and are not available in previous Cisco IOS XE Releases. See the "ISSU Procedures (Prior to Cisco IOS XE Release 2.1.2)" section on page 74 for pre-Cisco IOS XE Release 2.1.2 ISSU upgrade procedures. 124 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 207
platform software package clean (Optional) Removes the unused subpackages from the router. Examples The following example shows the software upgrade for Cisco ASR 1002 or 1004 Router running sub-packages: Router# show version Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9 - Cisco ASR1006 | Configuration Guide - Page 208
(Configured) = sso Redundancy State = sso Maintenance Mode = Disabled Manual Swact = disabled (peer unit not yet in terminal standby state) Communications = Up client count = 67 client_notification_TMR = 30000 milliseconds RF debug mask = 0x0 Router# show platform Chassis type: ASR1004 Slot - Cisco ASR1006 | Configuration Guide - Page 209
Software Upgrade Process Upgrade Process With Service Impact for Nonredundant Platforms Accessing tftp://172.17.16.81//auto/users/asr1000rp1-adventerprisek9.02.02.01.122-33.XNB1.bin 5.478 secs (9475122 bytes/sec) Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 127 - Cisco ASR1006 | Configuration Guide - Page 210
Upgrade Process With Service Impact for Nonredundant Platforms Software Upgrade Process Router# copy usb0:221subs/asr1000rp1-rpaccess.02.02.01.122-33.XNB1.pkg bootflash: Destination filename [asr1000rp1-rpaccess.02.02. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 211
provisioning rollback files Creating pending provisioning file Committing provisioning file Finished commit of software changes --- Starting analysis of software changes --Finished analysis of software changes Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 129 - Cisco ASR1006 | Configuration Guide - Page 212
not available. The network clock has changed to freerun *Sep 25 11:31:33.438: %REDUNDANCY-3-SWITCHOVER: RP switchover (PEER_NOT_PRESENT) *Sep 25 11:31:33.438: %REDUNDANCY-3-SWITCHOVER: RP switchover (PEER_DOWN) 130 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 213
state reached for (SSO) Router# show platform Chassis type: ASR1004 Slot Type State Insert time ( RP1 ok 00:31:12 R0/0 ok, standby 00:05:38 R0/1 ok, active 00:13:36 F0 ASR1000-ESP10 ok, active 00:31:12 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 214
Process With Service Impact for Nonredundant Platforms Software Upgrade Process 132 P0 ASR1004-PWR-AC ok P1 ASR1004-FAN ok 00:30:22 00:30:22 Slot CPLD Version Firmware Version 0 07091401 12.2(33r)XN1 R0 07062111 12.2(33r)XN2 F0 07091401 12.2(33r)XN1 Router# request platform - Cisco ASR1006 | Configuration Guide - Page 215
Inspecting image file types Processing image file constraints Creating candidate provisioning file Finished image file verification --- Starting candidate package set construction --Verifying existing software set Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 133 - Cisco ASR1006 | Configuration Guide - Page 216
final IPC and database definitions *Sep 29 10:11:16.631: %ASR1000_OIR-6-OFFLINECARD: Card (cc) offline in slot 0 *Sep 29 10:11:16.632: %ASR1000_OIR-6-REMSPA: SPA removed from subslot 0/0, interfaces disabled 134 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 217
Checking command output Constructing merge of running and candidate packages Finished candidate package set construction --- Starting compatibility testing --Determining whether candidate package set is compatible Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 135 - Cisco ASR1006 | Configuration Guide - Page 218
compatibility Checking infrastructure compatibility with running software Checking package specific compatibility Finished compatibility testing --- Starting impact testing --Checking operational provisioning file Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 219
:29.992: %CMRP-5-PRERELEASE_HARDWARE: R0/0: cmand: F0:0 is pre-release hardware Generating software version information Notifying running software of updates Unblocking peer synchronization of operating information Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 137 - Cisco ASR1006 | Configuration Guide - Page 220
testing --Determining whether candidate package set is compatible Determining whether installation is valid Determining whether installation is valid ... skipped Checking IPC compatibility for candidate software Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 221
.pkg asr1000rp1-rpbase.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg asr1000rp1-rpcontrol.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 139 - Cisco ASR1006 | Configuration Guide - Page 222
Upgrade Process With Service Impact for Nonredundant Platforms Software Upgrade rommon.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg ... done. Deleting file bootflash:asr1000-rommon : Files deleted. 140 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 223
Software Upgrade Process Additional References Additional References The following sections provide references related to the Software Upgrade Process feature. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 141 - Cisco ASR1006 | Configuration Guide - Page 224
Tool (accessed from Field Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds. Access to most tools on the Cisco Support website requires a Cisco.com user ID and password. 142 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 225
Name Releases Software IOS XE Upgrade Process Release 2.6 Feature Information This feature was introduced. Cisco ASR 1000 Series Routers support the following software upgrade procedures: • In Service Software Upgrades (ISSU) for redundant platforms • Upgrade process with service impact for - Cisco ASR1006 | Configuration Guide - Page 226
Feature Information for Software Upgrade Process Software Upgrade Process 144 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 227
support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required. Contents This section discusses various aspects of High Availability on the Cisco ASR 1000 Series Routers and contains the following sections: • Hardware Redundancy Overview - Cisco ASR1006 | Configuration Guide - Page 228
can be handled on the standby processor while the active processor continues normal operation. Hardware redundancy is available on the Cisco ASR 1006 Router only at this time. provides a hardware redundancy overview. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 2 - Cisco ASR1006 | Configuration Guide - Page 229
Hardware Redundancy Overview Hardware Enhanced Services Processor Route Processor SPA SIP Support for Dual Hardware Configuration on Cisco ASR 1001 Router Support for Dual Hardware Configuration on Cisco ASR 1002 Router Support for Dual Hardware Configuration on Cisco ASR 1004 Router Support - Cisco ASR1006 | Configuration Guide - Page 230
process in an ISSU upgrade. On the Cisco ASR 1006 Router, the second IOS process can run only on the standby Route Processor. Two IOS processes on the same Router Processor are not possible for any Cisco ASR 1000 Series Router that supports dual RP hardware redundancy configurations since the second - Cisco ASR1006 | Configuration Guide - Page 231
GB or DRAM None None Options with 4 GB or DRAM None, RPR, SSO None, RPR, SSO ISSU cannot be used to upgrade consolidated packages on Cisco ASR 1002 or 1004 Routers, and only a few subpackages can be upgraded individually using ISSU through the use of dual IOS processes on the same Route Processor - Cisco ASR1006 | Configuration Guide - Page 232
IOS process on a single RP for a Cisco ASR 1002 or 1004 Router. See the "Second IOS Process on a Cisco ASR 1002 or 1004 Router" section on page 4 for additional information on the second IOS process. It is important to note that in most cases, SSO requires less downtime for switchover and upgrades - Cisco ASR1006 | Configuration Guide - Page 233
technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password. http://www.cisco.com/cisco/web/support/index.html Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7 - Cisco ASR1006 | Configuration Guide - Page 234
also support that feature. Table 17 Feature Information for High Availability Overview Feature Name High Availability Overview Releases Cisco IOS XE 2.1S Feature Information In Cisco IOS XE Release 2.1S, this feature was introduced on the Cisco ASR 1000 Series Router. Cisco and the Cisco logo - Cisco ASR1006 | Configuration Guide - Page 235
page 3 • Layer 4 Redirect Scaling, page 4 • Configuring the Cisco ASR 1000 Series Router for High Scalability, page 4 • Using the cisco-avpair="lcp:interface-config" RADIUS Attribute, page 7 • Walk-by User Support for PWLAN in ISG, page 9 Americas Headquarters: Cisco Systems, Inc., 170 West Tasman - Cisco ASR1006 | Configuration Guide - Page 236
1001, 1002, and 1004 chassis, we recommend software redundancy be disabled for broadband applications, and only hardware redundancy be configured. • Restrictions on 48000 session scaling with RP2 and ESP-40G include: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 2 - Cisco ASR1006 | Configuration Guide - Page 237
proxy. Table 20 Maximum Number of IP Sessions Supported on ASR 1000 Hardware Chassis 1001 1002 RP Integrated Integrated RP1 ESP ESP-2.5G or ESP-5G ESP-5G IP Session 8000 12000 ISG Traffic Class 24000 36000 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 3 - Cisco ASR1006 | Configuration Guide - Page 238
128 128 128 128 128 Configuring the Cisco ASR 1000 Series Router for High Scalability The Cisco ASR 1000 Series Routers provide powerful performance and scalability for embedded services. To achieve maximum scaling on the 1001, 1002, and 1004 chassis, IOS software redundancy must be disabled. For - Cisco ASR1006 | Configuration Guide - Page 239
, see the "Control Plane Policing" section in the Quality of Service Solutions Configuration Guide located at: http://www.cisco.com/en/US/docs/ios-xml/ios/qos_plcshp/configuration/xe-3s/qos-plcshp-ctrl-pln-plc. html Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 5 - Cisco ASR1006 | Configuration Guide - Page 240
SNMP management tools: Router(config)# no virtual-template snmp Configuring the Access Interface Input and Output Hold Queue The default value of Gigabit Ethernet and 10 Gigabit Ethernet interfaces is 375 packets for the input and output hold queues. If the interfaces are required to handle a high - Cisco ASR1006 | Configuration Guide - Page 241
is any valid IOS command that can be applied to an interface. When the lcp:interface-config attribute is downloaded from the RADIUS server to the Cisco ASR 1000 Series Router, the command parser is activated to configure the interface according to AV-pair, determining if the option is valid and - Cisco ASR1006 | Configuration Guide - Page 242
, the per-user authorization process does not require the creation of full VAIs, which improves scalability. Setting the VRF and IP Unnumbered Interface Configurations in User Profiles Although the Cisco ASR 1000 Series Router continues to support the lcp:interface-config VSA, the ip:vrf-id and ip - Cisco ASR1006 | Configuration Guide - Page 243
4 Redirect (L4R) feature supports a maximum of 16 translation entries per walk-by session. For more information on the limit for the total number of translations on the system, see Layer 4 Redirect Scaling, page 4. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 9 - Cisco ASR1006 | Configuration Guide - Page 244
rates. However, after events such as failover or reload, the rates might exceed these numbers for some period before falling back to the sustained values. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 10 - Cisco ASR1006 | Configuration Guide - Page 245
technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password. http://www.cisco.com/cisco/web/support/index.html Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 11 - Cisco ASR1006 | Configuration Guide - Page 246
and Performance Feature Name High Availability Overview Walk-by User Support for PWLAN in ISG Releases Cisco IOS XE 2.1S Cisco IOS XE 3.7S Feature Information In Cisco IOS XE Release 2.1S, this feature was introduced on the Cisco ASR 1000 Series Router. In Cisco IOS XE Release 3.7S, this feature - Cisco ASR1006 | Configuration Guide - Page 247
Activation conceptual overview, see the Software Activation Configuration Guide, Cisco IOS XE Release 3S at this URL: http://www.cisco.com/en/US/docs/ios-xml/ios/csa/configuration/xe-3s/csa-xe-3s-book.html Finding Feature Information in This Module Your software release might not support all the - Cisco ASR1006 | Configuration Guide - Page 248
Once you purchase a product authorization key (PAK), Cisco License Call Home commands enable you to easily perform these tasks: • Install or upgrade a license. • Transfer a license. • Request that a license be resent. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 2 - Cisco ASR1006 | Configuration Guide - Page 249
Installing Licenses or Upgrading Software by Using Cisco License Call Home Perform this task to install a license or upgrade software by using the Cisco License Call Home feature. SUMMARY STEPS 1. Obtain the PAK. 2. enable Cisco ASR 1000 Series Aggregation Services Routers Software Configuration - Cisco ASR1006 | Configuration Guide - Page 250
and a target unique device identifier (UDI). SUMMARY STEPS 1. enable 2. license call-home revoke udi target-udi output-of-rehosted-license-url 3. show license detail 4. (Optional) license install stored-location-url Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4 - Cisco ASR1006 | Configuration Guide - Page 251
owns (device from which this command is run) by using the license call-home resend command. SUMMARY STEPS 1. enable 2. license call-home resend dest-lic-location 3. (Optional) license install stored-location-url Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 5 - Cisco ASR1006 | Configuration Guide - Page 252
Ordered Qty : 1 Available Qty : 1 Feature List : Feature name: gatekeeper Count: Uncounted Platform Supported : N/A 5400 5350 2800 3800 Do you want to install the above listed SKU(s)? [yes/no]: yes Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 253
5350 2800 3800 3. SKU Name : Gatekeeper SKU Type : Product Description : Ordered Qty : 1 Available Qty : 1 Feature List : Feature name: gatekeeper Count: Uncounted Platform Supported : N/A 5400 5350 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7 - Cisco ASR1006 | Configuration Guide - Page 254
location: Router# license call-home resend flash:licenseresend.lic CCO User name: User1 CCO password Email Address: [email protected] Getting Licenses from SWIFT .......... Saving it to flash:licenseresend.lic.....Done Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 8 - Cisco ASR1006 | Configuration Guide - Page 255
User Guide for Cisco License Manager Software Activation Configuration Guide, Cisco IOS XE Release 3S Cisco IOS Software Activation Command Reference Cisco IOS Master Commands List, All Releases Software Activation on Cisco Integrated Services Routers Standards Standard Title None - MIBs MIB - Cisco ASR1006 | Configuration Guide - Page 256
In Cisco IOS XE Release 3.6S, this feature was introduced on the Cisco ASR 1000 Series Router. The following commands were introduced or modified by this feature: license call-home install, license call-home resend, license call-home revoke, license call-home url, show license call-home. Cisco and - Cisco ASR1006 | Configuration Guide - Page 257
(TAC). This document describes how to configure the Call Home feature on Cisco ASR 1000 Series Aggregation Services Routers beginning with Cisco IOS XE Release 2.6. Finding Feature Information in This Module Your Cisco IOS software release may not support all of the features documented in this - Cisco ASR1006 | Configuration Guide - Page 258
message categories, including configuration, diagnostics, environmental conditions, inventory, and syslog events. • Filtering of messages by severity and pattern matching. • Scheduling of periodic message sending. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 2 - Cisco ASR1006 | Configuration Guide - Page 259
is required if you are using the HTTPS server for Cisco Smart Call Home Service in the CiscoTAC-1 profile for Call Home. • Verify IP connectivity from the router to the e-mail server(s) or the destination HTTP server. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 3 - Cisco ASR1006 | Configuration Guide - Page 260
and Disabling Call Home, page 23 (required) • Sending Call Home Communications Manually, page 24 (optional) Configuring the Management Interface VRF The Call Home feature on the Cisco ASR 1000 Series Routers requires use of the Gigabit Ethernet Management interface virtual routing and forwarding - Cisco ASR1006 | Configuration Guide - Page 261
on the Cisco ASR 1000 Series Router. (Required) Associates the Mgmt-intf VRF with the Gigabit Ethernet Management interface. This command is configured by default. (Required) Specifies the IPv4 or IPv6 addressing for the interface. Example: Router(config-if)# ip address 10.10.10.10 0.0.0.0 What To - Cisco ASR1006 | Configuration Guide - Page 262
command using different priority numbers. • The mail-server priority number parameter can be configured from 1 to 100. The server with the highest priority (lowest priority number) is tried first. SUMMARY STEPS 1. configure terminal 2. call-home Cisco ASR 1000 Series Aggregation Services Routers - Cisco ASR1006 | Configuration Guide - Page 263
"Configuring the Management Interface VRF" section on page 4. To associate the management interface VRF with Call Home, complete the following steps: SUMMARY STEPS 1. configure terminal 2. call-home 3. vrf Mgmt-intf Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 264
name 4. destination transport-method email 5. destination address email email-address 6. destination preferred-msg-format {long-text | short-text | xml} 7. destination message-size bytes 8. active 9. exit 10. end Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 8 - Cisco ASR1006 | Configuration Guide - Page 265
message size (from 50 to 3145728 bytes) for the destination profile. The default is 3145728 bytes. (Optional) Enables the destination profile. By default, a user-defined profile is enabled when it is created. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 9 - Cisco ASR1006 | Configuration Guide - Page 266
that will appear in the reply-to field in Call Home e-mail messages. Configuring a Destination Profile to Send HTTP Messages To configure Call Home to send HTTP (or HTTPS) messages, complete the following tasks: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 10 - Cisco ASR1006 | Configuration Guide - Page 267
HTTP client. Example: Router(config)# ip http client source-interface gigabitethernet 0 Note On the Cisco ASR 1000 Series Router, this interface should be the VRF management interface. end Returns to privileged EXEC mode. Example: Router(cfg-call-home)# end Configuring a Destination Profile - Cisco ASR1006 | Configuration Guide - Page 268
How to Configure Call Home 9. exit 10. end Configuring Call Home Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 12 - Cisco ASR1006 | Configuration Guide - Page 269
: Router(cfg-call-home-profile)# active (Optional) Configures a maximum destination message size for the destination profile. Enables the destination profile. By default, a profile is enabled when it is created. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 13 - Cisco ASR1006 | Configuration Guide - Page 270
and must be activated to be used. To activate or deactivate a destination profile, complete the following steps: SUMMARY STEPS 1. configure terminal 2. call-home 3. profile name 4. active 5. no active 6. end Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 14 - Cisco ASR1006 | Configuration Guide - Page 271
a Destination Profile To create a new destination profile by copying an existing profile, complete the following steps: SUMMARY STEPS 1. configure terminal 2. call-home 3. copy profile source-profile target-profile Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 15 - Cisco ASR1006 | Configuration Guide - Page 272
the profile. Renaming a Destination Profile To change the name of an existing profile, complete the following steps: SUMMARY STEPS 1. configure terminal 2. call-home 3. rename profile source-profile target-profile Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 16 - Cisco ASR1006 | Configuration Guide - Page 273
alerts supported in all routers. Different types of Call Home alerts are grouped into different alert groups depending on their type. The following alert groups are available on the Cisco ASR 1000 Series Routers: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 17 - Cisco ASR1006 | Configuration Guide - Page 274
send syslog messages of lower priority to IOS to process, thus "saving" CPU cycles for IOS Table 1 lists the keywords used to configure the severity, which range from catastrophic ( message logging severity levels. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 18 - Cisco ASR1006 | Configuration Guide - Page 275
date hh:mm | weekly day hh:mm}] 10. subscribe-to-alert-group syslog [severity {catastrophic | critical | debugging | disaster | fatal | major | minor | normal | notification | warning}] [pattern string] 11. exit Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 19 - Cisco ASR1006 | Configuration Guide - Page 276
| warning}] Subscribes this destination profile to the Environment alert group, with an optional severity level. Example: Router(cfg-call-home-profile)# subscribe-to-alert-group environment severity major Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 20 - Cisco ASR1006 | Configuration Guide - Page 277
steps: SUMMARY STEPS 1. configure terminal 2. call-home 3. contact-email-addr email-address 4. phone-number +phone-number 5. street-address street-address 6. customer-id text 7. site-id text 8. contract-id text Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 21 - Cisco ASR1006 | Configuration Guide - Page 278
up to 64 characters. If you include spaces, you must enclose your entry within double quotation marks (" "). Example The following example shows the configuration of contact information: Router# configure terminal Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 22 - Cisco ASR1006 | Configuration Guide - Page 279
60. The default is 20. Enabling and Disabling Call Home To enable or disable the Call Home feature, complete the following steps: SUMMARY STEPS 1. configure terminal 2. service call-home 3. no service call-home Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 23 - Cisco ASR1006 | Configuration Guide - Page 280
Call Home Alert Group Messages Manually You can use the call-home send command to manually send a specific alert group message. Note the following guidelines when manually sending a Call Home alert group message: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 24 - Cisco ASR1006 | Configuration Guide - Page 281
system. You can request a variety of reports, including security alerts, known bugs, best practices, and command references. Note the following guidelines when manually sending Call Home analysis and report requests: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 25 - Cisco ASR1006 | Configuration Guide - Page 282
request command specifies the type of report requested. Example The following example shows a request for analysis of a user-specified show command: Router# call-home request output-analysis "show diag" profile TG Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 26 - Cisco ASR1006 | Configuration Guide - Page 283
example shows how to send the output of a CLI command to a user-specified e-mail address: Router# call-home send "show diag" email [email protected] How To Configure Call Home to Support the Smart Call Home Service . Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 284
the Cisco Smart Call Home HTTPS server, you must change the transport method from email to HTTP and enable the profile. In addition, you must minimally specify a contact e-mail address and enable the Call Home feature. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 285
terminal 2. call-home 3. profile CiscoTAC-1 4. destination transport-method http 5. active 6. exit 7. contact-email-addr email-address 8. exit 9. service call-home 10. exit 11. copy running-config startup-config Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 29 - Cisco ASR1006 | Configuration Guide - Page 286
up to 200 characters in e-mail address format with no spaces. Exits call home configuration mode and returns to global configuration mode. Enables the Call Home feature. Example: Router(config)# service call-home Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 30 - Cisco ASR1006 | Configuration Guide - Page 287
2. crypto pki trustpoint name 3. enrollment terminal 4. exit 5. crypto pki authenticate name 6. At the prompt, paste the security certificate text. 7. quit 8. yes 9. end 10. copy running-config startup-config Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 31 - Cisco ASR1006 | Configuration Guide - Page 288
global configuration mode and returns to privileged EXEC mode. Step 10 Example: Router# end copy running-config startup-config Saves the configuration to NVRAM. Example: Router# copy running-config startup-config Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 289
Call Home How To Configure Call Home to Support the Smart Call Home Service Examples The following example shows the configuration for declaring and authenticating the Cisco server security certificate: Router# configure terminal Router(config)# crypto pki trustpoint cisco Router(ca-trustpoint - Cisco ASR1006 | Configuration Guide - Page 290
following commands: SUMMARY STEPS 1. show call-home 2. show call-home detail 3. show call-home alert-group 4. show call-home mail-server status 5. show call-home profile {all | name} 6. show call-home statistics Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 34 - Cisco ASR1006 | Configuration Guide - Page 291
examples show the sample output when using different options of the show call-home command. Example: Configured Call Home Information in Summary Router# show call- server[1]: Address: smtp.example.com Priority: 1 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 35 - Cisco ASR1006 | Configuration Guide - Page 292
Bytes Transport Method: email Email address(es): [email protected] HTTP address(es): Not yet set up Alert-group Severity inventory normal Syslog-Pattern Severity N/A N/A Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 36 - Cisco ASR1006 | Configuration Guide - Page 293
Bytes Transport Method: email Email address(es): [email protected] HTTP address(es): Not yet set up Alert-group Severity inventory normal Syslog-Pattern Severity N/A N/A Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 37 - Cisco ASR1006 | Configuration Guide - Page 294
6 6 0 Config 4 4 0 Diagnostic 0 0 0 Environment 0 0 0 Inventory 2 2 0 SysLog 0 0 0 Test 0 0 0 Request 0 0 0 Send-CLI 0 0 0 Total In-Queue 0 0 0 Config 0 0 0 Diagnostic 0 0 0 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 38 - Cisco ASR1006 | Configuration Guide - Page 295
0 Test 0 0 0 Request 0 0 0 Send-CLI 0 0 0 Total Ratelimit -dropped 0 0 0 Config 0 0 0 Diagnostic 0 0 0 Environment 0 0 0 Inventory 0 0 0 SysLog 0 0 0 Test 0 messages per minute 20 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 39 - Cisco ASR1006 | Configuration Guide - Page 296
:number TF:number - Events related to power, fan, and environment sensing elements, such as temperature alarms. (Sent to TAC.) CLI commands executed: show platform show environment show inventory show logging Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 40 - Cisco ASR1006 | Configuration Guide - Page 297
from subslot (slot/subslot number) and the interfaces are disabled. SPA inserted in subslot (slot/subslot number). Card (cc/rp/fp) removed from slot (slot number). Card (cc/rp/fp) inserted in slot (slot number). Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 41 - Cisco ASR1006 | Configuration Guide - Page 298
following subsections that provide sample messages: • Sample Syslog Alert Notification in Long Text Format, page 46 • Sample Syslog Alert Notification in XML Format, page 50 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 42 - Cisco ASR1006 | Configuration Guide - Page 299
/ ContractData/ContractId Site ID Optional user-configurable field used for site IDs supplied by Cisco Systems or other data meaningful to alternate support services. CallHome/CustomerData/ ContractData/SiteId Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 43 - Cisco ASR1006 | Configuration Guide - Page 300
executed for this alert group. Command output The exact name of the issued CLI command. name /aml/Attachments/Attachment/Name Attachment type Attachment type. Usually "inline". /aml/Attachments/Attachment@type Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 44 - Cisco ASR1006 | Configuration Guide - Page 301
/Cisco_Chassis/ HardwareVersion CallHome/Device/Cisco_Chassis/ AdditionalInformation/AD@name= "SoftwareVersion" CallHome/Device/Cisco_Chassis/ Cisco_Card/Model CallHome/Device/Cisco_Chassis/ Cisco_Card/SerialNumber Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 45 - Cisco ASR1006 | Configuration Guide - Page 302
Inactive Message Discriminator. Console logging: disabled Monitor logging: level debugging, 0 messages logged, xml disabled, filtering disabled Buffer logging: level debugging, 112 messages logged, xml disabled, Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 46 - Cisco ASR1006 | Configuration Guide - Page 303
R0/0: cmand: 2 is pre-release hardware *Dec 3 07:16:24.147 redundancy state is Active with ready Standby *Dec 3 07:17:01.926: %DYNCMD-7-PKGINT_INSTALLED: The command package 'platform_trace' has been succesfully installed Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 304
slot 2 *Dec 3 12:17:05.583 IST: %ASR1000_OIR-6-INSSPA: SPA inserted in subslot 2/3 *Dec 3 12:17:05.844 IST: %SYS-5-RESTART: System restarted -Cisco IOS Software, IOS -3-UPDOWN: Interface POS0/2/5, changed state to down Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 48 - Cisco ASR1006 | Configuration Guide - Page 305
Command Output Text : NAME: "Chassis", DESCR: "Cisco ASR1006 Chassis" PID: ASR1006 , VID: V00, SN: FOX105101DH NAME: "module 0", DESCR: "Cisco ASR1000 SPA Interface Processor 10" PID: MCP-CC , VID: V00, SN: JAB1104064W Cisco ASR 1000 Series Aggregation Services Routers Software Configuration - Cisco ASR1006 | Configuration Guide - Page 306
-session:MessageId>M0:FOX105101DH:CEC1E73E Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 50 - Cisco ASR1006 | Configuration Guide - Page 307
AD name="SystemDescription" value="Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD- Cisco Systems, Inc. Compiled Wed 18-Nov-09 01:14 by " /> Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 308
disabled No active filter modules. Trap logging: level 17:01.818: %DYNCMD-7-CMDSET_LOADED: The Dynamic Command set has been loaded from the Shell Manager * /0: cmand: 2 is pre-release hardware *Dec 3 07:16:24.147 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 52 - Cisco ASR1006 | Configuration Guide - Page 309
: F0 redundancy state is Active with ready Standby *Dec 3 07:17:01.926: %DYNCMD-7-PKGINT_INSTALLED: The command package 'platform_trace' has been succesfully installed *Dec : SPA (SPA-8XOC3-POS) online in subslot 0/2 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 53 - Cisco ASR1006 | Configuration Guide - Page 310
Version 2.3.14 started with no options compiled in. *Dec 3 12:17:11.584 IST: %IOSXE-5-PLATFORM: R0/0: xinetd[887]: Started working: 2 available services *Dec 3 12:17:13.753 Interface POS2/3/0, changed state to up Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 54 - Cisco ASR1006 | Configuration Guide - Page 311
-ESP10 , VID: V00, SN: JAB111101AP NAME: "Power Supply Module 0", DESCR: "Cisco ASR1006 AC Power Supply" PID: TBD000000000000000, VID: +^A , SN: ART1114Q00F NAME: "Fan Module 1", DESCR: "Cisco ASR1006 Fan Module" Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 55 - Cisco ASR1006 | Configuration Guide - Page 312
PID: TBD000000000000000, VID: +^A , SN: ART1115P00D Router#]]> Configuring Call Home Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 56 - Cisco ASR1006 | Configuration Guide - Page 313
Configuring Call Home Additional References Additional References The following sections provide references related to the Call Home feature. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 57 - Cisco ASR1006 | Configuration Guide - Page 314
MIB Locator found at the following URL: http://www.cisco.com/go/mibs RFCs RFC Title No new or modified RFCs are supported by this - feature, and support for existing RFCs has not been modified by this feature. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 315
compatibility with pager services, standard e-mail, or XML-based automated parsing applications. In Cisco IOS XE Release 2.6, support for this feature was added for the Cisco ASR 1000 Series Aggregation Services Routers. The following commands are new or modified: show diagnostic commands. Cisco - Cisco ASR1006 | Configuration Guide - Page 316
numbers in illustrative content is unintentional and coincidental. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide Copyright © 2008 - 2012 Cisco Systems, Inc. All rights reserved. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 60 - Cisco ASR1006 | Configuration Guide - Page 317
/go/cfn. An account on Cisco.com is not required. Contents • Prerequisites for Cisco Right-To-Use License, page 1 • Restrictions for Cisco Right-To-Use License, page 2 • Information About Cisco Right-To-Use License, page 2 • Configuration Examples for Right-To-Use Supported Software Licenses, page - Cisco ASR1006 | Configuration Guide - Page 318
. If a Permanent license does not exist, IOS activates an RTU license when you accept the EULA agreement and the corresponding IOS functionality will be available. The RTU license supported software features include: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 2 - Cisco ASR1006 | Configuration Guide - Page 319
FLSASR1-CS-TPEX CUBE(SP) License for ASR1000 in Video/B2BTP Ex Yes Yes SLASR1-AIS Cisco ASR 1000 Advanced IP Services License Yes Yes SLASR1-AES Cisco ASR 1000 Advanced Enterprise Services Yes Yes License Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 3 - Cisco ASR1006 | Configuration Guide - Page 320
running-config startup-config 6. reload DETAILED STEPS Command or Action Step 1 enable Step 2 Example: Router>enable configure terminal Example: Router#configure terminal Purpose Enables privileged EXEC mode. • Enter your password if prompted. Enters global configuration mode. Cisco ASR 1000 - Cisco ASR1006 | Configuration Guide - Page 321
EULA, page 6 • Example: Accepting EULA for Software Redundancy License, page 6 • Example: Accepting EULA for Inter-Chassis Redundancy License, page 7 • Example: Accepting EULA for Lawful Intercept License, page 8 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 5 - Cisco ASR1006 | Configuration Guide - Page 322
: %LICENSE-6-EULA_ACCEPT_ALL: The Right to Use End User License Agreement is accepted Example: Accepting EULA for Software Redundancy License The following examples shows the acceptance of EULA for software redundancy feature Cisco ASR 1000 Series Aggregation Services Routers Software Configuration - Cisco ASR1006 | Configuration Guide - Page 323
Configuring Cisco Right-To-Use License Configuration Examples for Right-To-Use Supported Software Licenses Router(config)#redundancy Router(config-red)#mode Router(config-red)#mode sso PLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE OR LICENSE KEY PROVIDED FOR ANY CISCO PRODUCT - Cisco ASR1006 | Configuration Guide - Page 324
devices, you must purchase 1000 licenses for use past the 60 day evaluation period.) Activation of the software command line interface will be evidence of your acceptance of this agreement. ACCEPT? (yes/[no]): yes Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 8 - Cisco ASR1006 | Configuration Guide - Page 325
of the evaluation period. It is your responsibility to determine when the evaluation period is complete and you are required to make payment to Cisco for your use of the product feature beyond the evaluation period. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 9 - Cisco ASR1006 | Configuration Guide - Page 326
left: 8 weeks 4 days Period used: 0 minute 0 second License Count: Non-Counted License Priority: None StoreIndex: 5 Feature: sw_redundancy Version: 1.0 License Type: RightToUse License State: Active, In Use Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 10 - Cisco ASR1006 | Configuration Guide - Page 327
IOS Software Activation Command Reference MIBs Link To locate and download MIBs for selected platforms, Cisco software releases, and feature sets, use Cisco MIB Locator found at the following URL: http://www.cisco.com/go/mibs Cisco ASR 1000 Series Aggregation Services Routers Software Configuration - Cisco ASR1006 | Configuration Guide - Page 328
technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password. http://www.cisco.com/cisco/web/support/index.html Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 12 - Cisco ASR1006 | Configuration Guide - Page 329
Table 2 Feature Information for Cisco Right-To-Use License Feature Name Configuring Cisco Right-To-Use License Releases IOS XE 3.7 Feature Information The Cisco ASR 1001 and ASR 1002-X Routers support technology package based licenses that are not node locked. In Cisco IOS XE Release 3.7, this - Cisco ASR1006 | Configuration Guide - Page 330
Feature Information for Cisco Right-To-Use License Configuring Cisco Right-To-Use License Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 14 - Cisco ASR1006 | Configuration Guide - Page 331
about platform support and Cisco software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required. Contents This guide covers the following topics: • Gigabit Ethernet Management Interface Overview, page 2 • Gigabit Ethernet Port - Cisco ASR1006 | Configuration Guide - Page 332
Router(config)#interface gigabitethernet0 Router(config-if)# End with CNTL/Z. IP Address Handling in ROMmon and the Management Ethernet Port On the Cisco ASR 1000 Series Routers, IP addresses can be configured in ROMmon (the IP_ADDRESS= and IP_SUBNET_MASK= commands) and through the use of the IOS - Cisco ASR1006 | Configuration Guide - Page 333
Using the Management Ethernet Interface Gigabit Ethernet Management Interface VRF In dual RP configurations, however, users should never configure the IP address in the ROMmon on either RP0 or RP1 to match each other or the IP address as defined by the IOS CLI. Configuring matching IP addresses - Cisco ASR1006 | Configuration Guide - Page 334
: not configured VRF label allocation mode: per-prefix Setting a Default Route in the Management Ethernet Interface VRF To set a default route in the Management Ethernet Interface VRF, enter the following command Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4 - Cisco ASR1006 | Configuration Guide - Page 335
0 command must be entered before entering the copy ftp command because the copy ftp command has no option of specifying a VRF name. TFTP Example Router(config)# ip tftp source-interface gigabitethernet 0 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 5 - Cisco ASR1006 | Configuration Guide - Page 336
-address command. Router(config)# ip name-server vrf Mgmt-intf IPv4-or-IPv6-address RADIUS or TACACS+ Server To group the Management VRF as part of a AAA server group, enter the ip vrf forward Mgmt-intf command when configuring the AAA server group. Cisco ASR 1000 Series Aggregation Services Routers - Cisco ASR1006 | Configuration Guide - Page 337
list (ACL) is attached to vty lines that are and are not using VRF, use the vrf-also option when attaching the ACL to the vty lines. Router(config)# line vty 0 4 Router(config-line)# access-class 90 in vrf-also Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7 - Cisco ASR1006 | Configuration Guide - Page 338
you to determine which software images support a specific software release, feature set, or platform. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 8 - Cisco ASR1006 | Configuration Guide - Page 339
phone numbers in illustrative content is unintentional and coincidental. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide Copyright © 2008 - 2012 Cisco Systems, Inc. All rights reserved. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 9 - Cisco ASR1006 | Configuration Guide - Page 340
Feature Information for Using the Management Ethernet Interface Using the Management Ethernet Interface Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 10 - Cisco ASR1006 | Configuration Guide - Page 341
the network. This document explains how to configure network synchronization on Cisco ASR 1000 Series Aggregation Services Routers. Finding Feature Information in This Module Your software release might not support all the features documented in this module. For the latest feature information and - Cisco ASR1006 | Configuration Guide - Page 342
the Other Cisco ASR 1000 Series Aggregation Services Routers BITS or SSU Port Support Matrix T1 T1 E1 Framing Modes Supported T1 ESF T1 SF E1 CRC4 SSM or QL Support No No No Tx Port No No No Rx Port Yes Yes Yes Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 2 - Cisco ASR1006 | Configuration Guide - Page 343
Cisco ASR 1000 Series Aggregation Services Routers BITS or SSU Port Support Matrix E1 E1 E1 2048 kHz Framing Modes Supported E1 FAS E1 CAS E1 CAS CRC4 2048 kHz SSM or QL Support No No No No Tx Port No No No No Rx Port Yes Yes Yes Yes You can configure network synchronization on the Cisco ASR - Cisco ASR1006 | Configuration Guide - Page 344
. You can also manage synchronization by using the following management options: • Hold-Off Time: If a clock source goes down, the router waits for a specific hold-off time before removing the clock source from the clock Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 345
: • QL-Enabled Mode, page 6 • QL-Disabled Mode, page 6 When multiple selection processes are present in a network element, all the processes work in the same mode. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 5 - Cisco ASR1006 | Configuration Guide - Page 346
simultaneously. Both these algorithms are mutually exclusive. • The Line to External feature for the clock cleanup is supported only if the line interface and the external interface are on the same metronome SPA. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 6 - Cisco ASR1006 | Configuration Guide - Page 347
option 2 GEN1 Router(config)# interface gigabitethernet 0/2/0 Router(config-if)# synchronous mode Router(config)# exit Router(config)# network-clock input-source 1 interface gigabitethernet 0/2/0 Router(config)# exit Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 348
option 2 GEN1 Router(config)# network-clock input-source 1 external 0/3/0 t1 esf Router(config)# exit The following example shows how to configure clock recovery from a BITS port for RP BITS on Cisco ASR 1000 Series Aggregation Services Routers with dual RP: Router# configure terminal Router(config - Cisco ASR1006 | Configuration Guide - Page 349
option 2 GEN1 Router(config)# network-clock output-source 1 external 0/3/0 t1 esf Router(config)# exit The following example shows how to configure clock recovery from a BITS port for RP BITS on Cisco ASR 1000 Series Aggregation Services Routers with dual RP: Router# configure terminal Router(config - Cisco ASR1006 | Configuration Guide - Page 350
config)# interface gigabitethernet 0/2/0 Router(config-if)# synchronous mode Router(config)# exit Router(config)# network-clock output-source line 1 interface gigabitethernet 0/2/0 external 0/3/0 Router(config)# exit Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 10 - Cisco ASR1006 | Configuration Guide - Page 351
. The wait-to-restore timer can be set in the global configuration mode and the interface configuration mode. The following example shows how to configure the wait-to-restore timer in the global configuration mode: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 11 - Cisco ASR1006 | Configuration Guide - Page 352
the output: Router# show network-clock synchronization Symbols: En - Enable, Dis - Disable, Adis - Admin Disable NA - Not Applicable * - Synchronization source selected # - Synchronization source force selected Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 12 - Cisco ASR1006 | Configuration Guide - Page 353
(sf_change)-> 1A (sf_change)-> 1A Nominated Interfaces Interface Internal SigType NA Mode/QL NA/Dis Prio QL_IN ESMC Tx ESMC Rx 251 QL-ST3 NA NA Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 13 - Cisco ASR1006 | Configuration Guide - Page 354
300 Wait-to-restore: 300 Lock Out: FALSE Signal Fail: FALSE Alarms: FALSE Slot Disabled: FALSE • Use the show esmc command to displays the ESMC configuration output: Router# show esmc Interface: GigabitEthernet0/0/0 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 14 - Cisco ASR1006 | Configuration Guide - Page 355
ESMC Rx Timer: Running ESMC Tx interval count: 1 ESMC INFO pkts in: 0 ESMC INFO pkts out: 256 ESMC EVENT pkts in: 0 ESMC EVENT pkts out: 0 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 15 - Cisco ASR1006 | Configuration Guide - Page 356
on the interfaces. Use the show network-clock synchronization detail command to check this. • Ensure that the nonrevertive configurations are in place. Ensure that there is no framing mismatch with the SSM option. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 16 - Cisco ASR1006 | Configuration Guide - Page 357
the show command to validate the framing for a specific interface. For the SSM option network-clock 1, framing should be SDH or E1, and for SSM option 2, it should be T1. synchronization detail command. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 17 - Cisco ASR1006 | Configuration Guide - Page 358
technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password. http://www.cisco.com/cisco/web/support/index.html Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 18 - Cisco ASR1006 | Configuration Guide - Page 359
Network Cisco IOS Synchronization Support XE 3.2S Network Cisco IOS Synchronization Support XE 3.7S Feature Information In Cisco IOS XE Release 3.2S, this feature was introduced on the Cisco ASR 1000 Series Router. In Cisco IOS XE Release 3.7S, the commands that are used to configure this - Cisco ASR1006 | Configuration Guide - Page 360
Feature Information for Network Synchronization Support Network Synchronization Support Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 20 - Cisco ASR1006 | Configuration Guide - Page 361
Configuring Bridge Domain Interfaces The Cisco ASR 1000 Series Aggregation Services Routers support the bridge domain interface (BDI) feature for packaging Layer 2 Ethernet segments into Layer 3 IP. Finding Feature Information Your software release might not support all the features documented in - Cisco ASR1006 | Configuration Guide - Page 362
of an EVC on a given port on a given router. Service instance is associated with a bridge domain based on the configuration. An incoming frame can be classified as service instance based on the following criteria: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 2 - Cisco ASR1006 | Configuration Guide - Page 363
the frames For more information on the EVC architecture, see Configuring Ethernet Virtual Connections on the Cisco ASR 1000 Router chapter in the Carrier Ethernet Configuration Guide located at: http://www.cisco.com/en/US/docs/ios-xml/ios/cether/configuration/xe-3s/ce-ether-vc-infra-xe.html Bridge - Cisco ASR1006 | Configuration Guide - Page 364
control lists (ACL) • IPv4 input and output QoS policies. The operations supported for the input and output service policies on a bridge domain interface are: - Classification domain. The byte counters are updated. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4 - Cisco ASR1006 | Configuration Guide - Page 365
Admin-down Admin-down No Shutdown Up Operationally-down Bridge Domain Interface Statistics For virtual interfaces, such as the bridge domain interface, protocol counters are periodically queried from the QFP. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 5 - Cisco ASR1006 | Configuration Guide - Page 366
-ESP10, ASR 1001, ASR1000-ESP10-N, ASR 1002-F (ESP2.5) ASR1000-ESP20 ASR1000-ESP40 4096 4096 4096 How to Configure a Bridge Domain Interface To configure a bridge domain interface, perform the following steps: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 6 - Cisco ASR1006 | Configuration Guide - Page 367
STEPS 1. configure terminal 2. interface BDI interface number 3. encapsulation encapsulation dot1q [second-dot1q ] 4. ip address ip-address mask 5. mac-address {mac-address} 6. no shut 7. shut Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7 - Cisco ASR1006 | Configuration Guide - Page 368
Cisco ASR 1000 Series Aggregation Services Router. Example The following example shows the configuration of a bridge domain interface at IP address 2.2.2.1 255.255.255.0: Router# configure terminal Enter configuration commands, one per line. End with CNTL/Z. Router(config)# interface BDI3 Router - Cisco ASR1006 | Configuration Guide - Page 369
the commands and the options available with each command, see the Cisco IOS Configuration Fundamentals Command Reference Guide located at: http://www.cisco.com/en/US/docs/ios/fundamentals/command/reference/cf_book.html Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 370
technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password. http://www.cisco.com/cisco/web/support/index.html Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 10 - Cisco ASR1006 | Configuration Guide - Page 371
Domain Interface Configuring Bridge Domain Interface Releases Cisco IOS XE 3.2.0S Cisco IOS XE 3.7.0S Feature Information This feature was introduced on the Cisco ASR 1000 Series Aggregation Services Routers. This feature was updated on the Cisco ASR 1000 Series Aggregation Services Routers. The - Cisco ASR1006 | Configuration Guide - Page 372
Feature Information for Configuring Bridge Domain Interfaces Configuring Bridge Domain Interfaces Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 12 - Cisco ASR1006 | Configuration Guide - Page 373
, and transparent bridging. This guide describes how to monitor and maintain the Multilink Frame Relay feature for the Cisco ASR 1000 Series Routers. Finding Feature Information in This Module Your software release might not support all the features documented in this module. For the latest feature - Cisco ASR1006 | Configuration Guide - Page 374
commands and the options available for each command, see the Cisco IOS Configuration Fundamentals Command Reference document, located at: http://www.cisco.com/en/US/docs/ios/fundamentals/command/reference/cf_book.html. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 375
technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password. http://www.cisco.com/cisco/web/support/index.html Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 3 - Cisco ASR1006 | Configuration Guide - Page 376
phone numbers in illustrative content is unintentional and coincidental. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide Copyright © 2008 - 2012 Cisco Systems, Inc. All rights reserved. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4 - Cisco ASR1006 | Configuration Guide - Page 377
in this module and to view a list of the releases in which each feature is supported, see the "Feature Information for Configuring MPLS Layer 2 VPNs" section on page 31. Use the Cisco Feature Navigator to find information about platform support and Cisco IOS and Cisco Catalyst operating system - Cisco ASR1006 | Configuration Guide - Page 378
. If the enterprise requires LAN connectivity to all its sites, traffic from the Ethernet or VLAN of one site can be sent through the IP/MPLS network and encapsulated as bridged traffic over an ATM VC of another site. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 2 - Cisco ASR1006 | Configuration Guide - Page 379
requires that the MTUs in both the ACs must match for the pseudowire that is to come up. The default MTU in one AC must match the MTU of other AC. Table 1 lists the range of MTUs that can be configured for different ACs. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration - Cisco ASR1006 | Configuration Guide - Page 380
ACs AC Type Range of MTUs1 Supported ATM 64 to 9216 Gigabit Ethernet 1500 to 9216 POS 64 to 9216 Fast Ethernet 1500 to 9216 1. The MTU configured on an AC must not exceed the MTU in the core network. This ensures that the traffic is not fragmented. • The CE routers with Ethernet - Cisco ASR1006 | Configuration Guide - Page 381
oam-ac emulation-enable command) can send end-to-end F5 loopback cells at configured intervals toward the CE router. When the pseudowire is down, an end-to-end F5 segment alarm indication signal (AIS) and remote defect indication (RDI) is sent from the PE router to the CE router. Figure 2 shows the - Cisco ASR1006 | Configuration Guide - Page 382
10. encapsulation mpls 11. interworking ethernet slot/subslot/port [.subinterface-number {point-to-point}] 27. mtu bytes 28. no atm enable-ilmi-trap 29. pvc [name] vpi/vci l2transport 30. encapsulation encapsulation-type Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 383
Configuring MPLS Layer 2 VPNs Configuring Frame Relay DLCI-to-ATM AAL5SNAP Bridged Interworking 31. xconnect peer-ip-address vc-id encapsulation mpls pw-class pw-class-name 32. exit Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7 - Cisco ASR1006 | Configuration Guide - Page 384
on the interface. Step 11 Example: Router(config-pw-class)# encapsulation mpls interworking ethernet Enables the L2VPN Ethernet interworking feature. Example: Router(config-pw-class)# interworking ethernet Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 8 - Cisco ASR1006 | Configuration Guide - Page 385
interface configuration mode. Configures an ATM interface and enters the interface configuration mode. Removes the previously configured IP address. Enables the ATM interface to generate the transmit clock internally. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 9 - Cisco ASR1006 | Configuration Guide - Page 386
Interworking feature on an ATM-PE router: no ip domain lookup mpls label range 101 4000 static 4001 5001 mpls label protocol ldp mpls ip default-route mpls ldp graceful-restart xconnect logging pseudowire status ! Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 10 - Cisco ASR1006 | Configuration Guide - Page 387
pseudowire status 9. controller t1 slot/subslot/port 10. framing esf 11. clock source internal 12. linecode b8zs 13. cablelength long db-loss-value 14. channel-group channel-group-number timeslots range 15. exit Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 11 - Cisco ASR1006 | Configuration Guide - Page 388
33. exit 34. connect connection-name interface dlci l2transport 35. xconnect peer-ip-address vc-id encapsulation mpls pw-class pw-class-name 36. exit Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 12 - Cisco ASR1006 | Configuration Guide - Page 389
(DCE) device. Enables system logging (syslog) reporting of pseudowire status events. Configures a T1 controller and enters the controller configuration mode. Selects the Extended Super Frame (ESF) for a T1 data line. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 13 - Cisco ASR1006 | Configuration Guide - Page 390
loopback 0 ip address ip-address mask Specifies the IP address for the Loopback interface. Step 22 Example: Router(config-if)# ip address 44.1.1.2 255.255.255.255 exit Exits the interface configuration mode. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 14 - Cisco ASR1006 | Configuration Guide - Page 391
protocol to configure the speed, duplex, and automatic flow control of the Gigabit Ethernet interface. Enables MPLS forwarding of the IPv4 packets towards the MPLS core. Exits the interface configuration mode. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 15 - Cisco ASR1006 | Configuration Guide - Page 392
-dlci 101 switched ! interface GigabitEthernet1/3/1 ip address 10.10.1.1 255.255.255.0 negotiation auto mpls ip ! connect fr-atm-2 Serial0/3/0:0 101 l2transport xconnect 44.1.1.2 100 pw-class atm-fr-bridged ! Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 16 - Cisco ASR1006 | Configuration Guide - Page 393
-Like Mode for the GEC for VPWS Feature Xconnect MPLS GEC-CE1 Customer Site GEC-PE1 ASR1K GEC-PE2 ASR1K GEC-CE2 Customer Site 332075 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 17 - Cisco ASR1006 | Configuration Guide - Page 394
: • GEC for VPWS does not support Q-in-Q encapsulation and remote port shutdown. • A maximum four member links are supported under the port channel and a maximum of 64 port channel bundles are supported per router. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 18 - Cisco ASR1006 | Configuration Guide - Page 395
10. exit 11. interface port-channel number 12. xconnect peer-ip-address vc-id encapsulation mpls pseudowire-class pw-class-name 13. interface GigabitEthernet slot | subslot | port 14. channel-group port-channel number Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 396
dropped. In the case of VLAN, the VLAN tag is removed, which leaves a pure Ethernet frame. Exits the xconnect configuration mode. Creates an EtherChannel interface on the Cisco Cable Modem Termination System (CMTS). Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 20 - Cisco ASR1006 | Configuration Guide - Page 397
ip 10. exit 11. interface port-channel number 12. xconnect peer-ip-address vc-id encapsulation mpls pw-class pw-class-name 13. interface GigabitEthernet slot | subslot | port 14. channel-group port-channel number Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 21 - Cisco ASR1006 | Configuration Guide - Page 398
Router(config-if)# xconnect 10.0.0.1 707 encapsulation mpl pseudowire-class gec-routed Binds an attachment circuit to a pseudowire to configure an AToM static pseudowire, specifies MPLS as the tunneling method, and enters the xconnect configuration mode. Cisco ASR 1000 Series Aggregation Services - Cisco ASR1006 | Configuration Guide - Page 399
gec-bridged ! interface GigabitEthernet0/0/3 channel-group 1 ! interface GigabitEthernet0/0/2 channel-group 1 ! router ospf 10 log-adjacency-changes network 44.1.1.2 0.0.0.0 area 0 network 10.10.1.2 0.0.0.255 area 0 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 23 - Cisco ASR1006 | Configuration Guide - Page 400
exit 7. pseudowire-class pw-class-name 8. encapsulation mpls 9. interworking ethernet 10. interface GigabitEthernet slot | subslot | port 11. xconnect peer-ip-address vc-id encapsulation mpls pw-class pw-class-name Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 24 - Cisco ASR1006 | Configuration Guide - Page 401
Router(config-if)# xconnect 10.0.0.1 707 encapsulation mpl pseudowire-class gec-bridged Binds an attachment circuit to a pseudowire to configure an AToM static pseudowire, specifies MPLS as the tunneling method, and enters the xconnect configuration mode. Cisco ASR 1000 Series Aggregation Services - Cisco ASR1006 | Configuration Guide - Page 402
Service Configuring MPLS Layer 2 VPNs Note Ethernet-to-EtherChannel over MPLS (Bridge) Interworking mode is also supported under VLAN. Any-to-EtherChannel over MPLS (Routed) Interworking You can configure Any-to-EtherChannel over MPLS (Routed) interworking on the Cisco ASR 1000 Series Routers - Cisco ASR1006 | Configuration Guide - Page 403
serial slot | subslot | port:timeslot 21. no ip address 22. encapsulation ppp 23. clock source internal 24. xconnect vc-id pw-class pw-class pw-class-name 25. xconnect peer-loopback vc-id pw-class pe-class-name Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 27 - Cisco ASR1006 | Configuration Guide - Page 404
of a DS1 link and uses the internal clock from the interface. Specifies Binary 8-Zero Substitution (B8ZS) as the line code type for the T1 controller. Decreases the transmit signal by 0 dB. This is the default value. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 28 - Cisco ASR1006 | Configuration Guide - Page 405
IP address. Step 22 Example: Router(config-if)# no ip address encapsulation ppp Example: Router(config-if)# encapsulation frame-relay Configures the PPP (for serial interface) encapsulation on serial interface. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 29 - Cisco ASR1006 | Configuration Guide - Page 406
Guide, Cisco IOS XE Release 3S MPLS Layer 2 VPNs Configuration Guide, Cisco IOS XE Release 3S Cisco IOS Configuration Fundamentals Command Reference Standards Standard Title No new or modified standards are supported by this - feature. MIBs MIB • CISCO-IETF-PW-MIB • CISCO-IETF-PW-MPLS-MIB MIBs - Cisco ASR1006 | Configuration Guide - Page 407
Catalyst operating system software images support a specific software release, feature set, or platform. To access the Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 408
Routers. The following sections provide information about this feature: • Gigabit EtherChannel for Virtual Private Wire Service, page 17 • Configuring Gigabit EtherChannel for Virtual Private Wire Service, page 19 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 409
the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental. © 2012 Cisco Systems, Inc. All rights reserved. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 33 - Cisco ASR1006 | Configuration Guide - Page 410
Glossary Configuring MPLS Layer 2 VPNs Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 34 - Cisco ASR1006 | Configuration Guide - Page 411
contents of trace files are useful for the following purposes: • Troubleshooting-If a Cisco ASR 1000 Series Router is having an issue, the trace file output may provide information that is useful for locating and solving the problem. Trace files can almost always be accessed through diagnostic mode - Cisco ASR1006 | Configuration Guide - Page 412
the trace level to 4 (warning) will ensure that all trace output for the specific module will be included in that trace file. The default tracing level for every module on the Cisco ASR 1000 Series Router is notice. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 2 - Cisco ASR1006 | Configuration Guide - Page 413
module on the Cisco ASR 1000 Series Routers, enter the show platform software trace level command in privileged EXEC or diagnostic mode. In the following example, the show platform software trace level command is used to view the tracing levels of the Forwarding Manager processes on the active RP - Cisco ASR1006 | Configuration Guide - Page 414
module in the Forwarding Manager of the ESP processor in slot R0 is set to the informational tracing level (max): Router(config)# platform trace boottime slot R0 bay 1 process forwarding-manager forwarding-manager level max Cisco ASR 1000 Series Aggregation Services Routers Software Configuration - Cisco ASR1006 | Configuration Guide - Page 415
on listen fd 7 08/23 11:53:57.440 [uipeer]: (info): Going to send a status update to the shell manager in slot 0 08/23 11:53:47.417 [uipeer]: (info): Going to send a status update to the shell manager in slot 0 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 5 - Cisco ASR1006 | Configuration Guide - Page 416
Tracing and Trace Management Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 6 - Cisco ASR1006 | Configuration Guide - Page 417
, page 4 Web User Interface General Overview The web user interface is available on Cisco ASR 1000 Series Routers starting in Cisco IOS XE Release 2.1.1. The web user interface is not available in Cisco IOS XE Release 2.1.0. Americas Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San - Cisco ASR1006 | Configuration Guide - Page 418
can be accessed by clicking the "IOS Web UI" option in the left-hand menu. On the Cisco ASR 1000 Series Routers, the legacy web user interface can only be used to configure and monitor the IOS subpackage. In some scenarios, most notably when an ip http command has been successfully entered to enable - Cisco ASR1006 | Configuration Guide - Page 419
user interface on the Cisco ASR 1000 Series Routers is also able to present monitoring information stored in both the IOS and nonIOS subpackages, allowing for a complete view of the router using the web user interface. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 3 - Cisco ASR1006 | Configuration Guide - Page 420
-based web user interface can be accessed through HTTP, HTTPS, or both protocols. Only one persistent web user interface transport map can be applied to a Cisco ASR 1000 Series Router at a time. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4 - Cisco ASR1006 | Configuration Guide - Page 421
Cisco ASR 1000 Series Routers is disabled by default. The legacy web user interface must be configured before the graphics-based web user interface can be enabled. Note The web user interface will not work if the Management Ethernet interface has not been configured or is not working; specifically - Cisco ASR1006 | Configuration Guide - Page 422
using the default HTTP and HTTPS ports is enabled: Router# configure terminal Enter configuration commands, one per line. Router(config)# ip http server Router(config)# ip http secure-server End with CNTL/Z. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 6 - Cisco ASR1006 | Configuration Guide - Page 423
router by an hour or more. For this reason, we recommend checking the router time using the show clock command before configuring the router and, if the router . The resource requires a higher privilege level login. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7 - Cisco ASR1006 | Configuration Guide - Page 424
is the same combination required to access the router. The graphics-based web user interface similar to Figure 6 in the "Graphics-Based Web User Interface Overview" section on page 3 should appear in your web browser. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 8 - Cisco ASR1006 | Configuration Guide - Page 425
commands and the options available with each command, see the Cisco IOS Configuration Fundamentals Command Reference Guide located at: http://www.cisco.com/en/US/docs/ios/fundamentals/command/reference -refresh update. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 9 - Cisco ASR1006 | Configuration Guide - Page 426
help feature that shows the options available in a certain keyword sequence using a drop-down menu. Figure 9 shows an example of this drop-down menu context-sensitive help feature. Figure 9 Web CLI Drop-Down Menu Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 10 - Cisco ASR1006 | Configuration Guide - Page 427
platform software nat • clear platform software nbar • clear platform software netflow • clear platform software pam • clear platform software qos • clear platform software route-map • clear platform software shell Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide A-1 - Cisco ASR1006 | Configuration Guide - Page 428
route-map • debug platform software shell • debug platform software urpf • debug platform software vty • debug platform software wccp • debug platform software zone Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide A-2 Appendix A Unsupported Commands OL-16506-11 - Cisco ASR1006 | Configuration Guide - Page 429
• show platform software mlppp • show platform software module • show platform software mpls • show platform software multicast • show platform software nat • show platform software nbar • show platform software netflow Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 430
• test platform software inject • test platform software process • test platform software shell • test platform software tdl • test platform software trace Appendix A Unsupported Commands Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide A-4 OL-16506-11 - Cisco ASR1006 | Configuration Guide - Page 431
.122-33.XNA.bi n Router(config)#config-reg 0x2102 Router(config)# exit *May 29 21:51:11.963: %SYS-5-CONFIG_I: Configured from console by user on console Router# show run | include boot boot-start-marker OL-16506-11 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-1 - Cisco ASR1006 | Configuration Guide - Page 432
-33.XNA.bin from 172.17.16.81 File reception completed. Boot image size = 208904396 (0xc73a0cc) bytes Using midplane macaddr Package header rev 0 structure detected Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-2 OL-16506-11 - Cisco ASR1006 | Configuration Guide - Page 433
Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 12.2(33)XNA, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by Cisco immediately. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-3 - Cisco ASR1006 | Configuration Guide - Page 434
If you require further assistance please contact us by sending email to [email protected]. cisco ASR1006 (RP1) processor with 1772131K/6147K bytes of memory. 5 Gigabit Ethernet interfaces 2 Packet over SONET interfaces 2 Channelized T3 ports 32768K bytes of non-volatile configuration memory. 4194304K - Cisco ASR1006 | Configuration Guide - Page 435
by sending email to [email protected]. cisco ASR1006 (RP1) processor with 1772131K/6147K bytes of memory. 5 Gigabit Ethernet interfaces 8 Serial interfaces 8 Channelized T1 ports 2 Packet over SONET interfaces 2 Channelized T3 ports 32768K bytes of non-volatile configuration memory. 4194304K bytes of - Cisco ASR1006 | Configuration Guide - Page 436
Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 12.2(33)XNA, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by Cisco Systems, Inc. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 437
0x2102 Extracting the SubPackages from a Consolidated Package into the Same File System The following example shows how to extract the subpackages from a consolidated package into the same file system: OL-16506-11 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-7 - Cisco ASR1006 | Configuration Guide - Page 438
-33.XNA.bin command, noting that the to option is not used, the sub-packages are extracted from the consolidated package into bootflash:. Router# dir bootflash: bytes total (286662656 bytes free) Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-8 OL-16506-11 - Cisco ASR1006 | Configuration Guide - Page 439
00 lost+found .rollback_timer .installer .ssh nvram_00100 .prst_sync 945377280 bytes total (695246848 bytes free) Router# : command is entered, the sub-packages are now in the bootflash: directory. Router# Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-9 - Cisco ASR1006 | Configuration Guide - Page 440
commands, one per line. End with CNTL/Z. Router(config)# boot system bootflash:packages.conf Router(config)# config-reg 0x2102 Router(config)# exit Router# config t *May 29 22:47:57.433: %SYS-5-CONFIG_I: Configured from console by user Router# show running-config | include boot B-10 Cisco ASR - Cisco ASR1006 | Configuration Guide - Page 441
at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-11 - Cisco ASR1006 | Configuration Guide - Page 442
If you require further assistance please contact us by sending email to [email protected]. cisco ASR1006 (RP1) processor with 1776227K/6147K bytes of memory. 5 Gigabit Ethernet interfaces 2 Packet over SONET interfaces 2 Channelized T3 ports 32768K bytes of non-volatile configuration memory. 4194304K - Cisco ASR1006 | Configuration Guide - Page 443
of non-volatile configuration memory. 4194304K bytes of physical memory. 921599K bytes of eUSB flash at bootflash:. 39004543K bytes of SATA hard disk at harddisk:. Configuration register is 0x2102 OL-16506-11 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-13 - Cisco ASR1006 | Configuration Guide - Page 444
bytes total (40190464 bytes free) Router# copy nvram:startup-config usb0: Destination filename [startup-config]? 3172 bytes copied in 0.214 secs (14822 bytes/sec) Router# dir usb0: Directory of usb0:/ B-14 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-11 - Cisco ASR1006 | Configuration Guide - Page 445
/tftp-users/user/startup-config !! 3517 bytes copied in 0.122 secs (28828 bytes/sec) Enabling a Second IOS Process on a Single RP Using SSO The show platform command output does not indicate a second IOS process is active: Router# show platform Chassis type: ASR1004 Slot Type State Insert time - Cisco ASR1006 | Configuration Guide - Page 446
to make SSO the operational redundancy mode: Router# reload Proceed with reload? [confirm] *May 27 19:45:16.917: %SYS-5-RELOAD: Reload requested by user on console. Reload Reason: Reload command. B-16 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-11 - Cisco ASR1006 | Configuration Guide - Page 447
-ADVENTERPRISEK9-M), Version 12.2(33)XNA, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by Cisco Systems, Inc. Compiled Thu 01-May-08 00:29 by mcpre Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-17 - Cisco ASR1006 | Configuration Guide - Page 448
IOS process is active on RP 0: Router# show platform Chassis type: ASR1004 Slot Type State Insert time (ago) 0 ASR1000-SIP10 ok 00:29:34 0/0 SPA-5X1GE-V2 ok 00:28:13 0/1 SPA-2XT3/E3 ok 00:28:18 B-18 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration - Cisco ASR1006 | Configuration Guide - Page 449
of GPL Version 2.0. For more details, see the documentation or "License Notice" file accompanying the IOS-XE software, or the applicable URL provided on the flyer accompanying the IOS-XE software. OL-16506-11 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-19 - Cisco ASR1006 | Configuration Guide - Page 450
:00 Jul 17 2008 16:43:34 -07:00 Dec 13 2004 03:53:00 -08:00 Dec 13 2004 03:53:49 -08:00 lost+found .rollback_timer .installer .ssh nvram_00100 B-20 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-11 - Cisco ASR1006 | Configuration Guide - Page 451
20:12:53 -07:00 asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin 58625 drwx 4096 Jul 21 2008 15:32:59 -07:00 lost+found .rollback_timer .installer .ssh nvram_00100 .prst_sync Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-21 - Cisco ASR1006 | Configuration Guide - Page 452
IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 12.2(33)XNA, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by Cisco Systems, Inc. B-22 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide - Cisco ASR1006 | Configuration Guide - Page 453
installation changes Building configuration... [OK] SUCCESS: version committed: bootflash:asr1000rp1-adventerprisek9.02.01.01.122-33.XNA1.bin Router# show version Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 12.2(33)XNA1, RELEASE SOFTWARE (fc1) Technical Support - Cisco ASR1006 | Configuration Guide - Page 454
Slot CPLD Version Firmware Version 0 06120701 12.2(33r)XN2 1 06120701 12.2(33r)XN2 R0 07082312 12.2(33r)XN2 R1 07062111 12.2(33r)XN2 F0 07051680 12.2(33r)XN2 F1 07051680 12.2(33r)XN2 B-24 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL - Cisco ASR1006 | Configuration Guide - Page 455
After the switchover, the user must log onto RP0. The remaining commands are all entered from RP0: Router# issu acceptversion Cancelling rollback timer SUCCESS: Rollback timer cancelled Router# issu commitversion Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-25 - Cisco ASR1006 | Configuration Guide - Page 456
8 FastEthernet interfaces 5 Gigabit Ethernet interfaces 8 Serial interfaces 8 Channelized T1 ports 2 Packet over SONET interfaces 2 Channelized T3 ports 32768K bytes of non-volatile configuration memory. B-26 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506 - Cisco ASR1006 | Configuration Guide - Page 457
-config | include boot boot-start-marker boot system bootflash:asr1000rp1-adventerprisek9.02.01.01.122-33.XNA1.bin boot system bootflash:asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin boot-end-marker Router# OL-16506-11 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration - Cisco ASR1006 | Configuration Guide - Page 458
ISSU-Consolidated Package Upgrade Appendix B Configuration Examples B-28 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-11 - Cisco ASR1006 | Configuration Guide - Page 459
() 8 Chassis Manager, Overview 6 Cisco ASR1002 Series Router, software compatibility 5 Cisco ASR1006 Series Router, software compatibility 5 Cisco IOS configuration changes, saving 12 command-line interface, getting help 8 command line processing 5 command modes, understanding 6 commands context - Cisco ASR1006 | Configuration Guide - Page 460
example 19 ISSU, Overview 2 ISSU, sub-packages dual RP 75 ISSU, upgrade procedures 74 ISSU and software compatibility 5 issu command, command set overview 5 ISSU restrictions 5 ISSU support, release 3.1S 5 IN-II Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL - Cisco ASR1006 | Configuration Guide - Page 461
Overview 3 RPControl, Overview 3 RPIOS, Overview 3 RPR, Cisco ASR 1002 or 1004SSO, Cisco ASR 1002 or 1004 77 P Packet Forwarding 4 platforms, supported release notes, identify using 15 pluggable services process, overview 7 S scalability configuring the access interface input and output hold queue - Cisco ASR1006 | Configuration Guide - Page 462
7 sub-packages, extracting modules from image 10 sub-packages, managing and configuring 10 sub-packages, restrictions 3 sub-packages, running the router using 2 sub-packages, upgrading individual 18 Synchronous Ethernet Support 2 T Tab key, command completion 8 telnet, configuring persistent telnet
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
229
-
230
-
231
-
232
-
233
-
234
-
235
-
236
-
237
-
238
-
239
-
240
-
241
-
242
-
243
-
244
-
245
-
246
-
247
-
248
-
249
-
250
-
251
-
252
-
253
-
254
-
255
-
256
-
257
-
258
-
259
-
260
-
261
-
262
-
263
-
264
-
265
-
266
-
267
-
268
-
269
-
270
-
271
-
272
-
273
-
274
-
275
-
276
-
277
-
278
-
279
-
280
-
281
-
282
-
283
-
284
-
285
-
286
-
287
-
288
-
289
-
290
-
291
-
292
-
293
-
294
-
295
-
296
-
297
-
298
-
299
-
300
-
301
-
302
-
303
-
304
-
305
-
306
-
307
-
308
-
309
-
310
-
311
-
312
-
313
-
314
-
315
-
316
-
317
-
318
-
319
-
320
-
321
-
322
-
323
-
324
-
325
-
326
-
327
-
328
-
329
-
330
-
331
-
332
-
333
-
334
-
335
-
336
-
337
-
338
-
339
-
340
-
341
-
342
-
343
-
344
-
345
-
346
-
347
-
348
-
349
-
350
-
351
-
352
-
353
-
354
-
355
-
356
-
357
-
358
-
359
-
360
-
361
-
362
-
363
-
364
-
365
-
366
-
367
-
368
-
369
-
370
-
371
-
372
-
373
-
374
-
375
-
376
-
377
-
378
-
379
-
380
-
381
-
382
-
383
-
384
-
385
-
386
-
387
-
388
-
389
-
390
-
391
-
392
-
393
-
394
-
395
-
396
-
397
-
398
-
399
-
400
-
401
-
402
-
403
-
404
-
405
-
406
-
407
-
408
-
409
-
410
-
411
-
412
-
413
-
414
-
415
-
416
-
417
-
418
-
419
-
420
-
421
-
422
-
423
-
424
-
425
-
426
-
427
-
428
-
429
-
430
-
431
-
432
-
433
-
434
-
435
-
436
-
437
-
438
-
439
-
440
-
441
-
442
-
443
-
444
-
445
-
446
-
447
-
448
-
449
-
450
-
451
-
452
-
453
-
454
-
455
-
456
-
457
-
458
-
459
-
460
-
461
-
462
 |
 |
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Cisco ASR 1000 Series Aggregation
Services Routers Software Configuration
Guide
July 25, 201
2
Text Part Number: OL-16506-11