Cisco ASR1006 Configuration Guide - Page 422
transport-map type, persistent webui, server, secure-server, show transport-map name
UPC - 882658196423
View all Cisco ASR1006 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 422 highlights
Configuring the Router for Web User Interface Access Configuring and Accessing the Web User Interface Step 4 Step 5 Step 6 Step 7 Create and name a persistent web user interface transport map by entering the transport-map type persistent webui transport-map-name command. Enable HTTP, HTTPS, or both by entering the following commands in transport map configuration mode: • server-Enables HTTP. • secure-server-Enables HTTPS. Port numbers cannot be set within the transport map. The port numbers defined in Step 3 are also used with these settings in the persistent web user interface transport map. (Optional) Enter the show transport-map name transport-map-name privileged EXEC command to verify that your transport map is properly configured. Enable the transport map by entering the transport type persistent webui input transport-map-name global configuration command. Examples In the following example, the web user interface using the default HTTP port is enabled: Router# configure terminal Enter configuration commands, one per line. End with CNTL/Z. Router(config)# ip http server Router(config)# transport-map type persistent webui http-webui Router(config-tmap)# server Router(config-tmap)# exit Router(config)# exit Router# show transport-map name http-webui Transport Map: Name: http-webui Type: Persistent Webui Transport Webui: Server: enabled Secure Server: disabled Router# configure terminal Router(config)# transport type persistent webui input http-webui *Apr 22 02:43:55.798: %UICFGEXP-6-SERVER_NOTIFIED_START: R0/0: psd: notified to start Server wui has been In the following example, the web user interface using the default HTTPs port is enabled: Router# configure terminal Enter configuration commands, one per line. End with CNTL/Z. Router(config)# ip http secure-server Router(config)# transport-map type persistent webui https-webui Router(config-tmap)# secure-server Router(config-tmap)# exit Router(config)# transport type persistent webui input https-webui *Apr 22 02:38:43.597: %UICFGEXP-6-SERVER_NOTIFIED_START: R0/0: psd: notified to start Server wui has been In the following example, the web user interface using the default HTTP and HTTPS ports is enabled: Router# configure terminal Enter configuration commands, one per line. Router(config)# ip http server Router(config)# ip http secure-server End with CNTL/Z. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 6