Cisco CP-7914 Quick Start Guide - Page 8
Connect the Support Bar to the Cisco IP Phone 7960
UPC - 746320615165
View all Cisco CP-7914 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
2. Connect the Support Bar to the Cisco IP Phone 7960 To connect the support bar to the Cisco IP Phone 7960, follow these steps. Step 1 Step 2 Step 3 Position the support bar on the back of the IP Phone so that it fits flush with the phone. Locate the two connector pins. Using a flat head screwdriver, carefully push each of the connector pins so that the support bar is firmly fastened to the IP Phone. 3. Connect the 7914 Expansion Module to the Support Bar To connect the Expansion Module to the support bar, follow these steps. Step 1 Step 2 Step 3 Position the phone so that the front of the phone is facing up. Line up the two open slots on the bottom of the 7914 Expansion Module with the two hooks on the support bar. Insert the hooks into the slots and then rotate the top of the 7914 Expansion Module into the support bar so that it rests flush with the bar. Tighten the thumb screw on the back of the 7914 Expansion Module. 8