Cisco PAP2 Administration Guide - Page 103
Configuring SIP Settings for Extensions, Admin Login, advanced, Extension, Network Settings
View all Cisco PAP2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Configuring SIP, SPCP, and NAT Configuring SIP 5 Parameter G729a Codec Name G729b Codec Name G723 Codec Name EncapRTP Codec Name Description G.729a codec name used in SDP. Defaults to G729a. G.729b codec name used in SDP. Defaults to G729ab. G.723 codec name used in SDP. Defaults to G723. NOTE Not applicable to the WIP310 or SPA525G. EncapRTP codec name used in SDP. Defaults to encaprtp. Configuring SIP Settings for Extensions STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the Extension tab. STEP 4 Under Network Settings, configure the following fields: Parameter Description SIP ToS/DiffServ Value Time of service (ToS)/differentiated services (DiffServ) field value in UDP IP packets carrying a SIP message. Defaults to 0x68. SIP CoS Value [0-7] Class of service (CoS) value for SIP messages. Defaults to 3. RTP ToS/DiffServ Value ToS/DiffServ field value in UDP IP packets carrying RTP data. Defaults to 0xb8. Cisco SPA and Wireless IP Phone Administration Guide 101