Cisco SPA8000-G1 Administration Guide - Page 161
Line Enable - ring settings
View all Cisco SPA8000-G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
ATA Voice Field Reference Line page B • "Gateway Accounts section (SPA3102)" section on page 179 • "Dial Plan section" section on page 180 • "FXS Port Polarity Configuration section" section on page 182 • "VoIP-to-PSTN Gateway Setup section (SPA8800)," on page 183 • "PSTN-To-VoIP Gateway Setup section (SPA8800)," on page 183 • "Call Forward, Speed Dial, Supplementary Services, and Ring Settings (SPA8000 and SPA8800)," on page 189 In a configuration profile, the Line parameters must be appended with the appropriate numeral (for example, [1] or [2]) to identify the line to which the setting applies. The number of lines varies with the model of the ATA device. For example, the SPA2102 provides two Line tabs (Line 1 and Line 2), while the SPA8000 provides eight tabs (Line1 through Line 8). Voice tab > Line page > Line Enable section Line Enable Trunk Enable To enable this line for service, select yes. Otherwise, select no. The default is yes. To add this line to a trunk group, choose the trunk group number. Otherwise, choose none. This feature is available on the SPA8000 only. The default is none. Cisco Small Business ATA Administration Guide 161