Cisco SPA942-RC Administration Guide - Page 274
General, Parameter, Description, Configuring BroadSoft, Busy Lamp Field Auto-Configuration SPA525G
UPC - 745883579464
View all Cisco SPA942-RC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 274 highlights
SPA and Wireless IP Phone Field Reference 932 Tab (SPA962/SPA525G only) B General Parameter Subscribe Expires Subscribe Retry Interval Unit 1 Enable Subscribe Delay Unit 2 Enable Server Type Test Mode Enable Attendant Console Call Pickup Code BLF List URI Unit 1 Key 1-32 Description Specifies how long the subscription remains valid. After the specified period of time, elapses, the SPA932 initiates a new subscription. Defaults to 1800. Specifies the length of time to wait to try again if subscription fails. Enables or disables the first SPA932 unit (each IP phone can have up to two SPA932s attached). Length of delay before attempting to subscribe. Defaults to 1. Enables or disables the second SPA932 unit (each IP phone can have up to two SPA932s attached). Selects the type of server used (SPA9000, BroadSoft, or Asterisk). Enables or disables test mode. When test mode is enabled, the LEDs are turned on when keys are pressed, going from off to green to red, and back to off. In test mode, when all the buttons on the SPA932 are returned to off, all the keys become orange. The SPA962 must be rebooted after the test is completed. The star code used for picking up a ringing call. Defaults to *98. Automatically configures BLF subscriptions for all users on a monitored list. See Configuring BroadSoft Busy Lamp Field Auto-Configuration (SPA525G), page 182. Enter a strings that define the extension and other parameters associated with each lighted button on the first SPA932 unit. Keywords and values are casesensitive. The configuration script is described in "Unit/Key Configuration Scripts" section on page 179. Cisco SPA and Wireless IP Phone Administration Guide 272