Cisco SRW2024-K9-NA User Manual - Page 10
Front Panel LEDs, Additional Front Panel Features - - n poe
View all Cisco SRW2024-K9-NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Front Panel LEDs System LED-(Green) Lights steady when the switch is powered on, and flashes when booting, performing self tests, and acquiring an IP address. If the LED flashes Amber, the switch has detected a hardware failure. LINK/ACT LED-(Green) Located on the left of the port. Lights steady when a link between the corresponding port and another device is detected. Flashes when the port is passing traffic. NOTE The System and LINK/ACT LEDs are on each model of the switch. The following LEDs are only present on switch models that have those capabilities: PoE (if present)-(Amber) Located on the right of the port. Lights steady to indicate that power is being supplied to a device attached to the corresponding port. 100M LED (if present)-(Green) Located on the right of the port. Lights steady when another device is connected to the port, is powered on, and a 100 Mbps link is established between the devices. When the LED is off, the connection speed is under 100 Mbps or nothing is cabled to the port. Gigabit LED (if present)-(Green) Located on the right of the port. Lights steady when another device is connected to the port, is powered on, and a 1000 Mbps link is established between the devices. When the LED is off, the connection speed is under 1000 Mbps or nothing is cabled to the port. MiniGBIC (if present)-(Green) Located on the right of the port. Lights steady when a connection is made through the shared RJ-45 port. Flashes when the port is passing traffic. Additional Front Panel Features The switch also has a reset button. The switch can be reset by inserting a pin or paper clip into the reset opening. See "Returning the Device to the Factory Default Settings" for details. 10 300 Series Managed Switches