Cisco WAVE-274-K9 Hardware Installation Guide - Page 47
Ports and LED Indicators
View all Cisco WAVE-274-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
234291 Chapter 4 WAVE Inline Network Adapter Ports and LED Indicators Ports and LED Indicators Figure 4-1 shows the 2-port inline network adapter port numbers, interface designations, and LEDs. Figure 4-1 2-Port Inline Network Adapter Port Numbering and LEDs W0 L0 LINK/ACT 100 1000 BYPASS W0 L0 W0 Port WAN0; Group 0 WAN interface L0 Port LAN0: Group 0 LAN interface The inline network adapter has three LEDs that correspond to each port (the W0 LEDs correspond to Port W0, and the W1 LEDs correspond to Port W1). Table 4-1 describes the LEDs. Table 4-1 Inline Network Adapter LEDs LEDs Link / Activity 100 1000 Bypass State Description On The 10/100/1000BASE-T interface is receiving power. Blinking The Ethernet link is transmitting data. On The speed of the Ethernet connection is 100BASE-TX. On The speed of the Ethernet connection is 1000BASE-TX. Both the 100 and The corresponding ports are in mechanical bypass mode. 1000 LEDs are on OL-17739-01 Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide 4-3